# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters
##

## @param kubeVersion Override Kubernetes version
##
kubeVersion: ""
## @param apiVersions Override Kubernetes API versions reported by .Capabilities
##
apiVersions: []
## @param nameOverride String to partially override common.names.name
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""
## @param commonLabels Labels to add to all deployed objects
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}
## @param clusterDomain Kubernetes cluster domain name
##
clusterDomain: cluster.local
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []

## @section VictoriaMetrics common parameters
##
## @param envflagEnable Enable envflag
##
envflagEnable: true
## @param envflagPrefix Prefix used for the envflag entries
##
envflagPrefix: VM_
## @param loggerFormat Set format of the logs
##
loggerFormat: json

## @section VictoriaMetrics Select Parameters
##
vmselect:
  ## Bitnami VictoriaMetrics Select image
  ## ref: https://hub.docker.com/r/bitnami/victoriametrics-vmselect/tags/
  ## @param vmselect.image.registry [default: REGISTRY_NAME] VictoriaMetrics Select image registry
  ## @param vmselect.image.repository [default: REPOSITORY_NAME/victoriametrics-vmselect] VictoriaMetrics Select image repository
  ## @skip vmselect.image.tag VictoriaMetrics Select image tag (immutable tags are recommended)
  ## @param vmselect.image.digest VictoriaMetrics Select image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
  ## @param vmselect.image.pullPolicy VictoriaMetrics Select image pull policy
  ## @param vmselect.image.pullSecrets VictoriaMetrics Select image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/victoriametrics-vmselect
    tag: 1.124.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: http://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param vmselect.replicaCount Number of VictoriaMetrics Select replicas to deploy
  ##
  replicaCount: 1
  ## @param vmselect.containerPorts.http VictoriaMetrics Select http container port
  ##
  containerPorts:
    http: 8481
  ## Configure extra options for VictoriaMetrics Select containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param vmselect.livenessProbe.enabled Enable livenessProbe on VictoriaMetrics Select containers
  ## @param vmselect.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param vmselect.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param vmselect.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param vmselect.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param vmselect.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmselect.readinessProbe.enabled Enable readinessProbe on VictoriaMetrics Select containers
  ## @param vmselect.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param vmselect.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param vmselect.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param vmselect.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param vmselect.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmselect.startupProbe.enabled Enable startupProbe on VictoriaMetrics Select containers
  ## @param vmselect.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param vmselect.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param vmselect.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param vmselect.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param vmselect.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmselect.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param vmselect.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param vmselect.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## VictoriaMetrics Select resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param vmselect.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmselect.resources is set (vmselect.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param vmselect.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param vmselect.kind Define how to deploy VictoriaMetrics Select (allowed values: deployment or statefulset)
  ##
  kind: "deployment"
  ## @param vmselect.podManagementPolicy Pod management policy for VictoriaMetrics Storage statefulset
  ## Ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#pod-management-policies
  ##
  podManagementPolicy: Parallel
  ## @param vmselect.annotations Annotations for VictoriaMetrics Select Deployment or StatefulSet
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  annotations: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param vmselect.podSecurityContext.enabled Enabled VictoriaMetrics Select pods' Security Context
  ## @param vmselect.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param vmselect.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param vmselect.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param vmselect.podSecurityContext.fsGroup Set VictoriaMetrics Select pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param vmselect.containerSecurityContext.enabled Enabled VictoriaMetrics Select containers' Security Context
  ## @param vmselect.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param vmselect.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param vmselect.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param vmselect.containerSecurityContext.runAsNonRoot Set VictoriaMetrics Select containers' Security Context runAsNonRoot
  ## @param vmselect.containerSecurityContext.privileged Set VictoriaMetrics Select containers' Security Context privileged
  ## @param vmselect.containerSecurityContext.readOnlyRootFilesystem Set VictoriaMetrics Select containers' Security Context runAsNonRoot
  ## @param vmselect.containerSecurityContext.allowPrivilegeEscalation Set VictoriaMetrics Select container's privilege escalation
  ## @param vmselect.containerSecurityContext.capabilities.drop Set VictoriaMetrics Select container's Security Context runAsNonRoot
  ## @param vmselect.containerSecurityContext.seccompProfile.type Set VictoriaMetrics Select container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: RuntimeDefault
  ## @param vmselect.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param vmselect.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param vmselect.extraArgs Add extra arguments to the default command
  ##
  extraArgs: []
  ## @param vmselect.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param vmselect.hostAliases VictoriaMetrics Select pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param vmselect.podLabels Extra labels for VictoriaMetrics Select pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param vmselect.podAnnotations Annotations for VictoriaMetrics Select pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param vmselect.podAffinityPreset Pod affinity preset. Ignored if `vmselect.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param vmselect.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `vmselect.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param vmselect.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param vmselect.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param vmselect.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param vmselect.autoscaling.vpa.enabled Enable VPA for VictoriaMetrics Select pods
    ## @param vmselect.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param vmselect.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param vmselect.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param vmselect.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: {}
      controlledResources: []
      maxAllowed: {}
      minAllowed: {}
      ## @param vmselect.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto
    ## @param vmselect.autoscaling.hpa.enabled Enable HPA for VictoriaMetrics Select pods
    ## @param vmselect.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param vmselect.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param vmselect.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param vmselect.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""
  ## Node vmselect.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param vmselect.nodeAffinityPreset.type Node affinity preset type. Ignored if `vmselect.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param vmselect.nodeAffinityPreset.key Node label key to match. Ignored if `vmselect.affinity` is set
    ##
    key: ""
    ## @param vmselect.nodeAffinityPreset.values Node label values to match. Ignored if `vmselect.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param vmselect.affinity Affinity for VictoriaMetrics Select pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `vmselect.podAffinityPreset`, `vmselect.podAntiAffinityPreset`, and `vmselect.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param vmselect.nodeSelector Node labels for VictoriaMetrics Select pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param vmselect.tolerations Tolerations for VictoriaMetrics Select pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param vmselect.updateStrategy.type VictoriaMetrics Select statefulset strategy type
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## @param vmselect.priorityClassName VictoriaMetrics Select pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param vmselect.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param vmselect.schedulerName Name of the k8s scheduler (other than default) for VictoriaMetrics Select pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param vmselect.terminationGracePeriodSeconds Seconds Redmine pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param vmselect.lifecycleHooks for the VictoriaMetrics Select container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param vmselect.extraEnvVars Array with extra environment variables to add to VictoriaMetrics Select nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param vmselect.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for VictoriaMetrics Select nodes
  ##
  extraEnvVarsCM: ""
  ## @param vmselect.extraEnvVarsSecret Name of existing Secret containing extra env vars for VictoriaMetrics Select nodes
  ##
  extraEnvVarsSecret: ""
  ## @param vmselect.extraVolumes Optionally specify extra list of additional volumes for the VictoriaMetrics Select pod(s)
  ##
  extraVolumes: []
  ## @param vmselect.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Select container(s)
  ##
  extraVolumeMounts: []
  ## @param vmselect.sidecars Add additional sidecar containers to the VictoriaMetrics Select pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param vmselect.initContainers Add additional init containers to the VictoriaMetrics Select pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## @section VictoriaMetrics Select RBAC Parameters
  ##

  ## ServiceAccount configuration
  ##
  serviceAccount:
    ## @param vmselect.serviceAccount.create Specifies whether a ServiceAccount should be created
    ##
    create: true
    ## @param vmselect.serviceAccount.name The name of the ServiceAccount to use.
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param vmselect.serviceAccount.annotations Additional Service Account annotations (evaluated as a template)
    ##
    annotations: {}
    ## @param vmselect.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
    ##
    automountServiceAccountToken: false
  ## @section VictoriaMetrics Select Traffic Exposure Parameters
  ##
  service:
    ## @param vmselect.service.type VictoriaMetrics Select service type
    ##
    type: ClusterIP
    ## @param vmselect.service.ports.http VictoriaMetrics Select service http port
    ##
    ports:
      http: 8481
    ## Node ports to expose
    ## @param vmselect.service.nodePorts.http Node port for HTTP
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
    ## @param vmselect.service.clusterIP VictoriaMetrics Select service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param vmselect.service.loadBalancerIP VictoriaMetrics Select service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param vmselect.service.loadBalancerSourceRanges VictoriaMetrics Select service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param vmselect.service.externalTrafficPolicy VictoriaMetrics Select service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param vmselect.service.annotations [object] Additional custom annotations for VictoriaMetrics Select service
    ##
    annotations: {}
    ## @param vmselect.service.extraPorts Extra ports to expose in VictoriaMetrics Select service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param vmselect.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param vmselect.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
    ## Headless service properties
    ##
    headless:
      ## @param vmselect.service.headless.annotations Annotations for the headless service.
      ##
      annotations: {}
  ## ref: http://kubernetes.io/docs/concepts/services-networking/ingress/
  ##
  ingress:
    ## @param vmselect.ingress.enabled Enable ingress record generation for VictoriaMetrics Select
    ##
    enabled: false
    ## @param vmselect.ingress.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param vmselect.ingress.apiVersion Force Ingress API version (automatically detected if not set)
    ##
    apiVersion: ""
    ## @param vmselect.ingress.hostname Default host for the ingress record
    ##
    hostname: vmselect.local
    ## @param vmselect.ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param vmselect.ingress.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @param vmselect.ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations: {}
    ## @param vmselect.ingress.tls Enable TLS configuration for the host defined at `vmselect.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.ingress.hostname }}`
    ## You can:
    ##   - Use the `vmselect.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `vmselect.ingress.selfSigned=true`
    ##
    tls: false
    ## @param vmselect.ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param vmselect.ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: victoriametrics select.local
    ##     path: /
    ##
    extraHosts: []
    ## @param vmselect.ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param vmselect.ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - victoriametrics select.local
    ##   secretName: victoriametrics select.local-tls
    ##
    extraTls: []
    ## @param vmselect.ingress.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: victoriametrics select.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param vmselect.ingress.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param vmselect.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param vmselect.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param vmselect.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param vmselect.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param vmselect.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param vmselect.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param vmselect.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}

  ## @section VictoriaMetrics Select Metrics Parameters
  ##
  ## Prometheus metrics
  ##
  metrics:
    ## @param vmselect.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## @param vmselect.metrics.annotations Additional custom annotations for the service
    ##
    annotations: {}
    ## Prometheus Operator ServiceMonitor configuration
    ##
    serviceMonitor:
      ## @param vmselect.metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
      ##
      enabled: false
      ## @param vmselect.metrics.serviceMonitor.namespace Namespace in which Prometheus is running
      ##
      namespace: ""
      ## @param vmselect.metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
      ##
      annotations: {}
      ## @param vmselect.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param vmselect.metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
      ##
      jobLabel: ""
      ## @param vmselect.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
      ## @param vmselect.metrics.serviceMonitor.interval Interval at which metrics should be scraped.
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## interval: 10s
      ##
      interval: ""
      ## @param vmselect.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## scrapeTimeout: 10s
      ##
      scrapeTimeout: ""
      ## @param vmselect.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param vmselect.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param vmselect.metrics.serviceMonitor.selector Prometheus instance selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}

## @section VictoriaMetrics Insert Parameters
##
vminsert:
  ## Bitnami VictoriaMetrics Insert image
  ## ref: https://hub.docker.com/r/bitnami/victoriametrics-vminsert/tags/
  ## @param vminsert.image.registry [default: REGISTRY_NAME] VictoriaMetrics Insert image registry
  ## @param vminsert.image.repository [default: REPOSITORY_NAME/victoriametrics-vminsert] VictoriaMetrics Insert image repository
  ## @skip vminsert.image.tag VictoriaMetrics Insert image tag (immutable tags are recommended)
  ## @param vminsert.image.digest VictoriaMetrics Insert image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
  ## @param vminsert.image.pullPolicy VictoriaMetrics Insert image pull policy
  ## @param vminsert.image.pullSecrets VictoriaMetrics Insert image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/victoriametrics-vminsert
    tag: 1.124.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: http://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param vminsert.replicaCount Number of VictoriaMetrics Insert replicas to deploy
  ##
  replicaCount: 1
  ## @param vminsert.containerPorts.http VictoriaMetrics Insert http container port
  ##
  containerPorts:
    http: 8480
  ## Configure extra options for VictoriaMetrics Insert containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param vminsert.livenessProbe.enabled Enable livenessProbe on VictoriaMetrics Insert containers
  ## @param vminsert.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param vminsert.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param vminsert.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param vminsert.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param vminsert.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vminsert.readinessProbe.enabled Enable readinessProbe on VictoriaMetrics Insert containers
  ## @param vminsert.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param vminsert.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param vminsert.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param vminsert.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param vminsert.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vminsert.startupProbe.enabled Enable startupProbe on VictoriaMetrics Insert containers
  ## @param vminsert.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param vminsert.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param vminsert.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param vminsert.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param vminsert.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vminsert.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param vminsert.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param vminsert.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## VictoriaMetrics Insert resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param vminsert.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vminsert.resources is set (vminsert.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param vminsert.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param vminsert.deploymentAnnotations Annotations for VictoriaMetrics Insert Deployment
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  deploymentAnnotations: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param vminsert.podSecurityContext.enabled Enabled VictoriaMetrics Insert pods' Security Context
  ## @param vminsert.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param vminsert.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param vminsert.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param vminsert.podSecurityContext.fsGroup Set VictoriaMetrics Insert pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param vminsert.containerSecurityContext.enabled Enabled VictoriaMetrics Insert containers' Security Context
  ## @param vminsert.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param vminsert.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param vminsert.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param vminsert.containerSecurityContext.runAsNonRoot Set VictoriaMetrics Insert containers' Security Context runAsNonRoot
  ## @param vminsert.containerSecurityContext.privileged Set VictoriaMetrics Insert containers' Security Context privileged
  ## @param vminsert.containerSecurityContext.readOnlyRootFilesystem Set VictoriaMetrics Insert containers' Security Context runAsNonRoot
  ## @param vminsert.containerSecurityContext.allowPrivilegeEscalation Set VictoriaMetrics Insert container's privilege escalation
  ## @param vminsert.containerSecurityContext.capabilities.drop Set VictoriaMetrics Insert container's Security Context runAsNonRoot
  ## @param vminsert.containerSecurityContext.seccompProfile.type Set VictoriaMetrics Insert container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: RuntimeDefault
  ## @param vminsert.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param vminsert.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param vminsert.extraArgs Add extra arguments to the default command
  ##
  extraArgs: []
  ## @param vminsert.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param vminsert.hostAliases VictoriaMetrics Insert pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param vminsert.podLabels Extra labels for VictoriaMetrics Insert pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param vminsert.podAnnotations Annotations for VictoriaMetrics Insert pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param vminsert.podAffinityPreset Pod affinity preset. Ignored if `vminsert.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param vminsert.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `vminsert.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param vminsert.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param vminsert.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param vminsert.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param vminsert.autoscaling.vpa.enabled Enable VPA for VictoriaMetrics Insert pods
    ## @param vminsert.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param vminsert.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param vminsert.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param vminsert.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: {}
      controlledResources: []
      maxAllowed: {}
      minAllowed: {}
      ## @param vminsert.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto
    ## @param vminsert.autoscaling.hpa.enabled Enable HPA for VictoriaMetrics Insert pods
    ## @param vminsert.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param vminsert.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param vminsert.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param vminsert.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""
  ## Node vminsert.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param vminsert.nodeAffinityPreset.type Node affinity preset type. Ignored if `vminsert.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param vminsert.nodeAffinityPreset.key Node label key to match. Ignored if `vminsert.affinity` is set
    ##
    key: ""
    ## @param vminsert.nodeAffinityPreset.values Node label values to match. Ignored if `vminsert.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param vminsert.affinity Affinity for VictoriaMetrics Insert pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `vminsert.podAffinityPreset`, `vminsert.podAntiAffinityPreset`, and `vminsert.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param vminsert.nodeSelector Node labels for VictoriaMetrics Insert pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param vminsert.tolerations Tolerations for VictoriaMetrics Insert pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param vminsert.updateStrategy.type VictoriaMetrics Insert statefulset strategy type
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## @param vminsert.priorityClassName VictoriaMetrics Insert pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param vminsert.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param vminsert.schedulerName Name of the k8s scheduler (other than default) for VictoriaMetrics Insert pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param vminsert.terminationGracePeriodSeconds Seconds Redmine pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param vminsert.lifecycleHooks for the VictoriaMetrics Insert container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param vminsert.extraEnvVars Array with extra environment variables to add to VictoriaMetrics Insert nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param vminsert.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for VictoriaMetrics Insert nodes
  ##
  extraEnvVarsCM: ""
  ## @param vminsert.extraEnvVarsSecret Name of existing Secret containing extra env vars for VictoriaMetrics Insert nodes
  ##
  extraEnvVarsSecret: ""
  ## @param vminsert.extraVolumes Optionally specify extra list of additional volumes for the VictoriaMetrics Insert pod(s)
  ##
  extraVolumes: []
  ## @param vminsert.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Insert container(s)
  ##
  extraVolumeMounts: []
  ## @param vminsert.sidecars Add additional sidecar containers to the VictoriaMetrics Insert pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param vminsert.initContainers Add additional init containers to the VictoriaMetrics Insert pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []

  ## ServiceAccount configuration
  ##
  serviceAccount:
    ## @param vminsert.serviceAccount.create Specifies whether a ServiceAccount should be created
    ##
    create: true
    ## @param vminsert.serviceAccount.name The name of the ServiceAccount to use.
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param vminsert.serviceAccount.annotations Additional Service Account annotations (evaluated as a template)
    ##
    annotations: {}
    ## @param vminsert.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
    ##
    automountServiceAccountToken: false
  ## @section VictoriaMetrics Insert Traffic Exposure Parameters
  ##
  service:
    ## @param vminsert.service.type VictoriaMetrics Insert service type
    ##
    type: ClusterIP
    ## @param vminsert.service.ports.http VictoriaMetrics Insert service http port
    ##
    ports:
      http: 8480
    ## Node ports to expose
    ## @param vminsert.service.nodePorts.http Node port for HTTP
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
    ## @param vminsert.service.clusterIP VictoriaMetrics Insert service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param vminsert.service.loadBalancerIP VictoriaMetrics Insert service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param vminsert.service.loadBalancerSourceRanges VictoriaMetrics Insert service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param vminsert.service.externalTrafficPolicy VictoriaMetrics Insert service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param vminsert.service.annotations [object] Additional custom annotations for VictoriaMetrics Insert service
    ##
    annotations: {}
    ## @param vminsert.service.extraPorts Extra ports to expose in VictoriaMetrics Insert service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param vminsert.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param vminsert.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## ref: http://kubernetes.io/docs/concepts/services-networking/ingress/
  ##
  ingress:
    ## @param vminsert.ingress.enabled Enable ingress record generation for VictoriaMetrics Insert
    ##
    enabled: false
    ## @param vminsert.ingress.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param vminsert.ingress.apiVersion Force Ingress API version (automatically detected if not set)
    ##
    apiVersion: ""
    ## @param vminsert.ingress.hostname Default host for the ingress record
    ##
    hostname: vminsert.local
    ## @param vminsert.ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param vminsert.ingress.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @param vminsert.ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations: {}
    ## @param vminsert.ingress.tls Enable TLS configuration for the host defined at `vminsert.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.ingress.hostname }}`
    ## You can:
    ##   - Use the `vminsert.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `vminsert.ingress.selfSigned=true`
    ##
    tls: false
    ## @param vminsert.ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param vminsert.ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: victoriametrics select.local
    ##     path: /
    ##
    extraHosts: []
    ## @param vminsert.ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param vminsert.ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - victoriametrics select.local
    ##   secretName: victoriametrics select.local-tls
    ##
    extraTls: []
    ## @param vminsert.ingress.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: victoriametrics select.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param vminsert.ingress.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param vminsert.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param vminsert.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param vminsert.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param vminsert.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param vminsert.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param vminsert.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param vminsert.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}

  ## @section VictoriaMetrics Insert Metrics Parameters
  ##
  ## Prometheus metrics
  ##
  metrics:
    ## @param vminsert.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## @param vminsert.metrics.annotations Additional custom annotations for the service
    ##
    annotations: {}
    ## Prometheus Operator ServiceMonitor configuration
    ##
    serviceMonitor:
      ## @param vminsert.metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
      ##
      enabled: false
      ## @param vminsert.metrics.serviceMonitor.namespace Namespace in which Prometheus is running
      ##
      namespace: ""
      ## @param vminsert.metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
      ##
      annotations: {}
      ## @param vminsert.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param vminsert.metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
      ##
      jobLabel: ""
      ## @param vminsert.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
      ## @param vminsert.metrics.serviceMonitor.interval Interval at which metrics should be scraped.
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## interval: 10s
      ##
      interval: ""
      ## @param vminsert.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## scrapeTimeout: 10s
      ##
      scrapeTimeout: ""
      ## @param vminsert.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param vminsert.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param vminsert.metrics.serviceMonitor.selector Prometheus instance selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}

## @section VictoriaMetrics Storage Parameters
##
vmstorage:
  ## Bitnami VictoriaMetrics Storage image
  ## ref: https://hub.docker.com/r/bitnami/victoriametrics-vmstorage/tags/
  ## @param vmstorage.image.registry [default: REGISTRY_NAME] VictoriaMetrics Storage image registry
  ## @param vmstorage.image.repository [default: REPOSITORY_NAME/victoriametrics-vmstorage] VictoriaMetrics Storage image repository
  ## @skip vmstorage.image.tag VictoriaMetrics Storage image tag (immutable tags are recommended)
  ## @param vmstorage.image.digest VictoriaMetrics Storage image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
  ## @param vmstorage.image.pullPolicy VictoriaMetrics Storage image pull policy
  ## @param vmstorage.image.pullSecrets VictoriaMetrics Storage image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/victoriametrics-vmstorage
    tag: 1.124.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: http://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param vmstorage.replicaCount Number of VictoriaMetrics Storage replicas to deploy
  ##
  replicaCount: 1
  ## @param vmstorage.containerPorts.http VictoriaMetrics Storage http container port
  ## @param vmstorage.containerPorts.vmselect VictoriaMetrics Storage vmselect container port
  ## @param vmstorage.containerPorts.vminsert VictoriaMetrics Storage vminsert container port
  ##
  containerPorts:
    http: 8482
    vmselect: 8401
    vminsert: 8400
  ## Configure extra options for VictoriaMetrics Storage containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param vmstorage.livenessProbe.enabled Enable livenessProbe on VictoriaMetrics Storage containers
  ## @param vmstorage.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param vmstorage.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param vmstorage.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param vmstorage.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param vmstorage.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmstorage.readinessProbe.enabled Enable readinessProbe on VictoriaMetrics Storage containers
  ## @param vmstorage.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param vmstorage.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param vmstorage.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param vmstorage.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param vmstorage.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmstorage.startupProbe.enabled Enable startupProbe on VictoriaMetrics Storage containers
  ## @param vmstorage.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param vmstorage.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param vmstorage.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param vmstorage.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param vmstorage.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmstorage.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param vmstorage.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param vmstorage.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## VictoriaMetrics Storage resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param vmstorage.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmstorage.resources is set (vmstorage.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "small"
  ## @param vmstorage.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param vmstorage.retentionPeriod Data retention period
  ##
  retentionPeriod: 1
  ## @param vmstorage.statefulsetAnnotations Annotations for VictoriaMetrics Storage statefulset
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  statefulsetAnnotations: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param vmstorage.podSecurityContext.enabled Enabled VictoriaMetrics Storage pods' Security Context
  ## @param vmstorage.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param vmstorage.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param vmstorage.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param vmstorage.podSecurityContext.fsGroup Set VictoriaMetrics Storage pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param vmstorage.containerSecurityContext.enabled Enabled VictoriaMetrics Storage containers' Security Context
  ## @param vmstorage.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param vmstorage.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param vmstorage.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param vmstorage.containerSecurityContext.runAsNonRoot Set VictoriaMetrics Storage containers' Security Context runAsNonRoot
  ## @param vmstorage.containerSecurityContext.privileged Set VictoriaMetrics Storage containers' Security Context privileged
  ## @param vmstorage.containerSecurityContext.readOnlyRootFilesystem Set VictoriaMetrics Storage containers' Security Context runAsNonRoot
  ## @param vmstorage.containerSecurityContext.allowPrivilegeEscalation Set VictoriaMetrics Storage container's privilege escalation
  ## @param vmstorage.containerSecurityContext.capabilities.drop Set VictoriaMetrics Storage container's Security Context runAsNonRoot
  ## @param vmstorage.containerSecurityContext.seccompProfile.type Set VictoriaMetrics Storage container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: RuntimeDefault
  ## @param vmstorage.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param vmstorage.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param vmstorage.extraArgs Add extra arguments to the default command
  ##
  extraArgs: []
  ## @param vmstorage.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param vmstorage.hostAliases VictoriaMetrics Storage pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param vmstorage.podLabels Extra labels for VictoriaMetrics Storage pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param vmstorage.podAnnotations Annotations for VictoriaMetrics Storage pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param vmstorage.podAffinityPreset Pod affinity preset. Ignored if `vmstorage.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param vmstorage.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `vmstorage.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param vmstorage.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param vmstorage.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param vmstorage.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param vmstorage.autoscaling.vpa.enabled Enable VPA for VictoriaMetrics Storage pods
    ## @param vmstorage.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param vmstorage.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param vmstorage.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param vmstorage.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: {}
      controlledResources: []
      maxAllowed: {}
      minAllowed: {}
      ## @param vmstorage.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto
    ## @param vmstorage.autoscaling.hpa.enabled Enable HPA for VictoriaMetrics Storage pods
    ## @param vmstorage.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param vmstorage.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param vmstorage.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param vmstorage.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""
  ## Node vmstorage.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param vmstorage.nodeAffinityPreset.type Node affinity preset type. Ignored if `vmstorage.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param vmstorage.nodeAffinityPreset.key Node label key to match. Ignored if `vmstorage.affinity` is set
    ##
    key: ""
    ## @param vmstorage.nodeAffinityPreset.values Node label values to match. Ignored if `vmstorage.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param vmstorage.affinity Affinity for VictoriaMetrics Storage pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `vmstorage.podAffinityPreset`, `vmstorage.podAntiAffinityPreset`, and `vmstorage.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param vmstorage.nodeSelector Node labels for VictoriaMetrics Storage pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param vmstorage.podManagementPolicy Pod management policy for VictoriaMetrics Storage statefulset
  ## Ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#pod-management-policies
  ##
  podManagementPolicy: Parallel
  ## @param vmstorage.tolerations Tolerations for VictoriaMetrics Storage pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param vmstorage.updateStrategy.type VictoriaMetrics Storage statefulset strategy type
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## @param vmstorage.priorityClassName VictoriaMetrics Storage pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param vmstorage.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param vmstorage.schedulerName Name of the k8s scheduler (other than default) for VictoriaMetrics Storage pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param vmstorage.terminationGracePeriodSeconds Seconds Redmine pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param vmstorage.lifecycleHooks for the VictoriaMetrics Storage container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param vmstorage.extraEnvVars Array with extra environment variables to add to VictoriaMetrics Storage nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param vmstorage.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for VictoriaMetrics Storage nodes
  ##
  extraEnvVarsCM: ""
  ## @param vmstorage.extraEnvVarsSecret Name of existing Secret containing extra env vars for VictoriaMetrics Storage nodes
  ##
  extraEnvVarsSecret: ""
  ## @param vmstorage.extraVolumes Optionally specify extra list of additional volumes for the VictoriaMetrics Storage pod(s)
  ##
  extraVolumes: []
  ## @param vmstorage.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Storage container(s)
  ##
  extraVolumeMounts: []
  ## @param vmstorage.sidecars Add additional sidecar containers to the VictoriaMetrics Storage pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param vmstorage.initContainers Add additional init containers to the VictoriaMetrics Storage pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## ServiceAccount configuration
  ##
  serviceAccount:
    ## @param vmstorage.serviceAccount.create Specifies whether a ServiceAccount should be created
    ##
    create: true
    ## @param vmstorage.serviceAccount.name The name of the ServiceAccount to use.
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param vmstorage.serviceAccount.annotations Additional Service Account annotations (evaluated as a template)
    ##
    annotations: {}
    ## @param vmstorage.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
    ##
    automountServiceAccountToken: false
  ## @section VictoriaMetrics Storage Traffic Exposure Parameters
  ##
  service:
    ## @param vmstorage.service.type VictoriaMetrics Storage service type
    ##
    type: ClusterIP
    ## @param vmstorage.service.ports.http VictoriaMetrics Storage service http port
    ##
    ports:
      http: 80
    ## Node ports to expose
    ## @param vmstorage.service.nodePorts.http Node port for HTTP
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
    ## @param vmstorage.service.clusterIP VictoriaMetrics Storage service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param vmstorage.service.loadBalancerIP VictoriaMetrics Storage service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param vmstorage.service.loadBalancerSourceRanges VictoriaMetrics Storage service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param vmstorage.service.externalTrafficPolicy VictoriaMetrics Storage service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param vmstorage.service.annotations [object] Additional custom annotations for VictoriaMetrics Storage service
    ##
    annotations: {}
    ## @param vmstorage.service.extraPorts Extra ports to expose in VictoriaMetrics Storage service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param vmstorage.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param vmstorage.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
    ## Headless service properties
    ##
    headless:
      ## @param vmstorage.service.headless.annotations Annotations for the headless service.
      ##
      annotations: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param vmstorage.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param vmstorage.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param vmstorage.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param vmstorage.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param vmstorage.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param vmstorage.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param vmstorage.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}

  ## @section VictoriaMetrics Storage Persistence Parameters
  ## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
  ##
  persistence:
    ## @param vmstorage.persistence.enabled Enable persistence using Persistent Volume Claims
    ##
    enabled: true
    ## @param vmstorage.persistence.mountPath Persistent Volume mount root path
    ##
    mountPath: /data
    ## @param vmstorage.persistence.storageClass Persistent Volume storage class
    ## If defined, storageClassName: <storageClass>
    ## If set to "-", storageClassName: "", which disables dynamic provisioning
    ## If undefined (the default) or set to null, no storageClassName spec is set, choosing the default provisioner
    ##
    storageClass: ""
    ## @param vmstorage.persistence.accessModes [array] Persistent Volume access modes
    ##
    accessModes:
      - ReadWriteOnce
    ## @param vmstorage.persistence.size Persistent Volume size
    ##
    size: 10Gi
    ## @param vmstorage.persistence.dataSource Custom PVC data source
    ##
    dataSource: {}
    ## @param vmstorage.persistence.annotations Annotations for the PVC
    ##
    annotations: {}
    ## @param vmstorage.persistence.selector Selector to match an existing Persistent Volume (this value is evaluated as a template)
    ## selector:
    ##   matchLabels:
    ##     app: my-app
    ##
    selector: {}
    ## @param vmstorage.persistence.existingClaim The name of an existing PVC to use for persistence
    ##
    existingClaim: ""
    ## @param vmstorage.persistence.extraVolumeClaimTemplates  Add additional VolumeClaimTemplates for enabling any plugins or any other purpose
    ##
    extraVolumeClaimTemplates: []

  ## @section VictoriaMetrics Storage Metrics Parameters
  ##

  ## Prometheus metrics
  ##
  metrics:
    ## @param vmstorage.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## @param vmstorage.metrics.annotations Additional custom annotations for the service
    ##
    annotations: {}
    ## Prometheus Operator ServiceMonitor configuration
    ##
    serviceMonitor:
      ## @param vmstorage.metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
      ##
      enabled: false
      ## @param vmstorage.metrics.serviceMonitor.namespace Namespace in which Prometheus is running
      ##
      namespace: ""
      ## @param vmstorage.metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
      ##
      annotations: {}
      ## @param vmstorage.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param vmstorage.metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
      ##
      jobLabel: ""
      ## @param vmstorage.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
      ## @param vmstorage.metrics.serviceMonitor.interval Interval at which metrics should be scraped.
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## interval: 10s
      ##
      interval: ""
      ## @param vmstorage.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## scrapeTimeout: 10s
      ##
      scrapeTimeout: ""
      ## @param vmstorage.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param vmstorage.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param vmstorage.metrics.serviceMonitor.selector Prometheus instance selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}

## @section VictoriaMetrics Auth Parameters
##
vmauth:
  ## @param vmauth.enabled Enable VictoriaMetrics Auth
  ##
  enabled: true
  ## Bitnami VictoriaMetrics Auth image
  ## ref: https://hub.docker.com/r/bitnami/victoriametrics-vmauth/tags/
  ## @param vmauth.image.registry [default: REGISTRY_NAME] VictoriaMetrics Auth image registry
  ## @param vmauth.image.repository [default: REPOSITORY_NAME/victoriametrics-vmauth] VictoriaMetrics Auth image repository
  ## @skip vmauth.image.tag VictoriaMetrics Auth image tag (immutable tags are recommended)
  ## @param vmauth.image.digest VictoriaMetrics Auth image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
  ## @param vmauth.image.pullPolicy VictoriaMetrics Auth image pull policy
  ## @param vmauth.image.pullSecrets VictoriaMetrics Auth image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/victoriametrics-vmauth
    tag: 1.124.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: http://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param vmauth.replicaCount Number of VictoriaMetrics Auth replicas to deploy
  ##
  replicaCount: 1
  ## @param vmauth.containerPorts.http VictoriaMetrics Auth http container port
  ##
  containerPorts:
    http: 8427
  ## Configure extra options for VictoriaMetrics Auth containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param vmauth.livenessProbe.enabled Enable livenessProbe on VictoriaMetrics Auth containers
  ## @param vmauth.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param vmauth.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param vmauth.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param vmauth.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param vmauth.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmauth.readinessProbe.enabled Enable readinessProbe on VictoriaMetrics Auth containers
  ## @param vmauth.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param vmauth.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param vmauth.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param vmauth.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param vmauth.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmauth.startupProbe.enabled Enable startupProbe on VictoriaMetrics Auth containers
  ## @param vmauth.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param vmauth.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param vmauth.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param vmauth.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param vmauth.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmauth.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param vmauth.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param vmauth.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## VictoriaMetrics Auth resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param vmauth.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmauth.resources is set (vmauth.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param vmauth.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param vmauth.kind Define how to deploy VictoriaMetrics Auth (allowed values: deployment or daemonset)
  ##
  kind: "deployment"
  ## @param vmauth.annotations Annotations for VictoriaMetrics Auth Deployment or StatefulSet
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  annotations: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param vmauth.podSecurityContext.enabled Enabled VictoriaMetrics Auth pods' Security Context
  ## @param vmauth.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param vmauth.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param vmauth.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param vmauth.podSecurityContext.fsGroup Set VictoriaMetrics Auth pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param vmauth.containerSecurityContext.enabled Enabled VictoriaMetrics Auth containers' Security Context
  ## @param vmauth.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param vmauth.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param vmauth.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param vmauth.containerSecurityContext.runAsNonRoot Set VictoriaMetrics Auth containers' Security Context runAsNonRoot
  ## @param vmauth.containerSecurityContext.privileged Set VictoriaMetrics Auth containers' Security Context privileged
  ## @param vmauth.containerSecurityContext.readOnlyRootFilesystem Set VictoriaMetrics Auth containers' Security Context runAsNonRoot
  ## @param vmauth.containerSecurityContext.allowPrivilegeEscalation Set VictoriaMetrics Auth container's privilege escalation
  ## @param vmauth.containerSecurityContext.capabilities.drop Set VictoriaMetrics Auth container's Security Context runAsNonRoot
  ## @param vmauth.containerSecurityContext.seccompProfile.type Set VictoriaMetrics Auth container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: RuntimeDefault
  ## @param vmauth.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param vmauth.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param vmauth.extraArgs Add extra arguments to the default command
  ##
  extraArgs: []
  ## @param vmauth.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param vmauth.hostAliases VictoriaMetrics Auth pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param vmauth.podLabels Extra labels for VictoriaMetrics Auth pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param vmauth.podAnnotations Annotations for VictoriaMetrics Auth pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param vmauth.podAffinityPreset Pod affinity preset. Ignored if `vmauth.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param vmauth.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `vmauth.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param vmauth.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param vmauth.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param vmauth.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## @param vmauth.configOverrides Overwrite or add extra configuration options to the chart default
  ## Example:
  ## configOverrides:
  ##   ip_filters:
  ##     allow_list: ["1.2.3.0/24", "127.0.0.1"]
  ##
  configOverrides: {}
  ## @param vmauth.existingSecret The name of an existing Secret with configuration
  ##
  existingSecret: ""
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param vmauth.autoscaling.vpa.enabled Enable VPA for VictoriaMetrics Auth pods
    ## @param vmauth.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param vmauth.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param vmauth.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param vmauth.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: {}
      controlledResources: []
      maxAllowed: {}
      minAllowed: {}
      ## @param vmauth.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto
    ## @param vmauth.autoscaling.hpa.enabled Enable HPA for VictoriaMetrics Auth pods
    ## @param vmauth.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param vmauth.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param vmauth.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param vmauth.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""
  ## Node vmauth.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param vmauth.nodeAffinityPreset.type Node affinity preset type. Ignored if `vmauth.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param vmauth.nodeAffinityPreset.key Node label key to match. Ignored if `vmauth.affinity` is set
    ##
    key: ""
    ## @param vmauth.nodeAffinityPreset.values Node label values to match. Ignored if `vmauth.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param vmauth.affinity Affinity for VictoriaMetrics Auth pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `vmauth.podAffinityPreset`, `vmauth.podAntiAffinityPreset`, and `vmauth.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param vmauth.nodeSelector Node labels for VictoriaMetrics Auth pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param vmauth.tolerations Tolerations for VictoriaMetrics Auth pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param vmauth.updateStrategy.type VictoriaMetrics Auth statefulset strategy type
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## @param vmauth.priorityClassName VictoriaMetrics Auth pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param vmauth.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param vmauth.schedulerName Name of the k8s scheduler (other than default) for VictoriaMetrics Auth pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param vmauth.terminationGracePeriodSeconds Seconds Redmine pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param vmauth.lifecycleHooks for the VictoriaMetrics Auth container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param vmauth.extraEnvVars Array with extra environment variables to add to VictoriaMetrics Auth nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param vmauth.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for VictoriaMetrics Auth nodes
  ##
  extraEnvVarsCM: ""
  ## @param vmauth.extraEnvVarsSecret Name of existing Secret containing extra env vars for VictoriaMetrics Auth nodes
  ##
  extraEnvVarsSecret: ""
  ## @param vmauth.extraVolumes Optionally specify extra list of additional volumes for the VictoriaMetrics Auth pod(s)
  ##
  extraVolumes: []
  ## @param vmauth.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Auth container(s)
  ##
  extraVolumeMounts: []
  ## @param vmauth.sidecars Add additional sidecar containers to the VictoriaMetrics Auth pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param vmauth.initContainers Add additional init containers to the VictoriaMetrics Auth pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## @section VictoriaMetrics Auth RBAC Parameters
  ##

  ## ServiceAccount configuration
  ##
  serviceAccount:
    ## @param vmauth.serviceAccount.create Specifies whether a ServiceAccount should be created
    ##
    create: true
    ## @param vmauth.serviceAccount.name The name of the ServiceAccount to use.
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param vmauth.serviceAccount.annotations Additional Service Account annotations (evaluated as a template)
    ##
    annotations: {}
    ## @param vmauth.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
    ##
    automountServiceAccountToken: false
  ## @section VictoriaMetrics Auth Traffic Exposure Parameters
  ##
  service:
    ## @param vmauth.service.type VictoriaMetrics Auth service type
    ##
    type: ClusterIP
    ## @param vmauth.service.ports.http VictoriaMetrics Auth service http port
    ##
    ports:
      http: 8427
    ## Node ports to expose
    ## @param vmauth.service.nodePorts.http Node port for HTTP
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
    ## @param vmauth.service.clusterIP VictoriaMetrics Auth service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param vmauth.service.loadBalancerIP VictoriaMetrics Auth service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param vmauth.service.loadBalancerSourceRanges VictoriaMetrics Auth service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param vmauth.service.externalTrafficPolicy VictoriaMetrics Auth service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param vmauth.service.annotations [object] Additional custom annotations for VictoriaMetrics Auth service
    ##
    annotations: {}
    ## @param vmauth.service.extraPorts Extra ports to expose in VictoriaMetrics Auth service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param vmauth.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param vmauth.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## ref: http://kubernetes.io/docs/concepts/services-networking/ingress/
  ##
  ingress:
    ## @param vmauth.ingress.enabled Enable ingress record generation for VictoriaMetrics Auth
    ##
    enabled: false
    ## @param vmauth.ingress.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param vmauth.ingress.apiVersion Force Ingress API version (automatically detected if not set)
    ##
    apiVersion: ""
    ## @param vmauth.ingress.hostname Default host for the ingress record
    ##
    hostname: vmauth.local
    ## @param vmauth.ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param vmauth.ingress.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @param vmauth.ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations: {}
    ## @param vmauth.ingress.tls Enable TLS configuration for the host defined at `vmauth.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.ingress.hostname }}`
    ## You can:
    ##   - Use the `vmauth.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `vmauth.ingress.selfSigned=true`
    ##
    tls: false
    ## @param vmauth.ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param vmauth.ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: victoriametrics select.local
    ##     path: /
    ##
    extraHosts: []
    ## @param vmauth.ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param vmauth.ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - victoriametrics select.local
    ##   secretName: victoriametrics select.local-tls
    ##
    extraTls: []
    ## @param vmauth.ingress.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: victoriametrics select.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param vmauth.ingress.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param vmauth.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param vmauth.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param vmauth.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param vmauth.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param vmauth.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param vmauth.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param vmauth.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}

  ## @section VictoriaMetrics Auth Metrics Parameters
  ##
  ## Prometheus metrics
  ##
  metrics:
    ## @param vmauth.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## @param vmauth.metrics.annotations Additional custom annotations for the service
    ##
    annotations: {}
    ## Prometheus Operator ServiceMonitor configuration
    ##
    serviceMonitor:
      ## @param vmauth.metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
      ##
      enabled: false
      ## @param vmauth.metrics.serviceMonitor.namespace Namespace in which Prometheus is running
      ##
      namespace: ""
      ## @param vmauth.metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
      ##
      annotations: {}
      ## @param vmauth.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param vmauth.metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
      ##
      jobLabel: ""
      ## @param vmauth.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
      ## @param vmauth.metrics.serviceMonitor.interval Interval at which metrics should be scraped.
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## interval: 10s
      ##
      interval: ""
      ## @param vmauth.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## scrapeTimeout: 10s
      ##
      scrapeTimeout: ""
      ## @param vmauth.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param vmauth.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param vmauth.metrics.serviceMonitor.selector Prometheus instance selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}

## @section VictoriaMetrics Agent Parameters
##
vmagent:
  ## @param vmagent.enabled Enable VictoriaMetrics Agent
  ##
  enabled: true
  ## Bitnami VictoriaMetrics Agent image
  ## ref: https://hub.docker.com/r/bitnami/victoriametrics-vmagent/tags/
  ## @param vmagent.image.registry [default: REGISTRY_NAME] VictoriaMetrics Agent image registry
  ## @param vmagent.image.repository [default: REPOSITORY_NAME/victoriametrics-vmagent] VictoriaMetrics Agent image repository
  ## @skip vmagent.image.tag VictoriaMetrics Agent image tag (immutable tags are recommended)
  ## @param vmagent.image.digest VictoriaMetrics Agent image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
  ## @param vmagent.image.pullPolicy VictoriaMetrics Agent image pull policy
  ## @param vmagent.image.pullSecrets VictoriaMetrics Agent image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/victoriametrics-vmagent
    tag: 1.124.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: http://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param vmagent.replicaCount Number of VictoriaMetrics Agent replicas to deploy
  ##
  replicaCount: 1
  ## @param vmagent.containerPorts.http VictoriaMetrics Agent http container port
  ## @param vmagent.containerPorts.graphite VictoriaMetrics Agent graphite container port
  ## @param vmagent.containerPorts.opentsdb VictoriaMetrics Agent opentsdb container port
  ## @param vmagent.containerPorts.influxdb VictoriaMetrics Agent influxdb container port
  ##
  containerPorts:
    http: 8429
    graphite: 2003
    opentsdb: 4242
    influxdb: 8089
  ## Configure extra options for VictoriaMetrics Agent containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param vmagent.livenessProbe.enabled Enable livenessProbe on VictoriaMetrics Agent containers
  ## @param vmagent.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param vmagent.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param vmagent.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param vmagent.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param vmagent.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmagent.readinessProbe.enabled Enable readinessProbe on VictoriaMetrics Agent containers
  ## @param vmagent.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param vmagent.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param vmagent.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param vmagent.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param vmagent.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmagent.startupProbe.enabled Enable startupProbe on VictoriaMetrics Agent containers
  ## @param vmagent.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param vmagent.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param vmagent.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param vmagent.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param vmagent.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmagent.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param vmagent.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param vmagent.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## VictoriaMetrics Agent resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param vmagent.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmagent.resources is set (vmagent.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param vmagent.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param vmagent.kind Define how to deploy VictoriaMetrics Agent (allowed values: deployment or daemonset)
  ##
  kind: "deployment"
  ## @param vmagent.annotations Annotations for VictoriaMetrics Agent Deployment or StatefulSet
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  annotations: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param vmagent.podSecurityContext.enabled Enabled VictoriaMetrics Agent pods' Security Context
  ## @param vmagent.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param vmagent.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param vmagent.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param vmagent.podSecurityContext.fsGroup Set VictoriaMetrics Agent pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param vmagent.containerSecurityContext.enabled Enabled VictoriaMetrics Agent containers' Security Context
  ## @param vmagent.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param vmagent.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param vmagent.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param vmagent.containerSecurityContext.runAsNonRoot Set VictoriaMetrics Agent containers' Security Context runAsNonRoot
  ## @param vmagent.containerSecurityContext.privileged Set VictoriaMetrics Agent containers' Security Context privileged
  ## @param vmagent.containerSecurityContext.readOnlyRootFilesystem Set VictoriaMetrics Agent containers' Security Context runAsNonRoot
  ## @param vmagent.containerSecurityContext.allowPrivilegeEscalation Set VictoriaMetrics Agent container's privilege escalation
  ## @param vmagent.containerSecurityContext.capabilities.drop Set VictoriaMetrics Agent container's Security Context runAsNonRoot
  ## @param vmagent.containerSecurityContext.seccompProfile.type Set VictoriaMetrics Agent container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: RuntimeDefault
  ## @param vmagent.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param vmagent.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param vmagent.extraArgs Add extra arguments to the default command
  ##
  extraArgs: []
  ## @param vmagent.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: true
  ## @param vmagent.hostAliases VictoriaMetrics Agent pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param vmagent.podLabels Extra labels for VictoriaMetrics Agent pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param vmagent.podAnnotations Annotations for VictoriaMetrics Agent pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param vmagent.podAffinityPreset Pod affinity preset. Ignored if `vmagent.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param vmagent.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `vmagent.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param vmagent.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param vmagent.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param vmagent.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## @param vmagent.scrapeConfigOverrides Overwrite or add extra scraping configuration options to the chart default
  ## Example:
  ## configOverrides:
  ##   ip_filters:
  ##     allow_list: ["1.2.3.0/24", "127.0.0.1"]
  ##
  scrapeConfigOverrides: {}
  ## @param vmagent.enableListeners.influxdb Enable influxdb listener
  ## @param vmagent.enableListeners.opentsdb Enable graphite listener
  ## @param vmagent.enableListeners.graphite Enable opentsdb listener
  enableListeners:
    influxdb: false
    opentsdb: false
    graphite: false
  ## @param vmagent.existingScrapeConfigMap The name of an existing ConfigMap with the scrape configuration
  ##
  existingScrapeConfigMap: ""
  ## @param vmagent.namespaced Only scrape in the deployed namespace
  ##
  namespaced: false
  ## @param vmagent.allowedMetricsEndpoints [array] Allowed metrics endpoints to scrape (when not namespaced)
  ##
  allowedMetricsEndpoints:
    - /metrics
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param vmagent.autoscaling.vpa.enabled Enable VPA for VictoriaMetrics Agent pods
    ## @param vmagent.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param vmagent.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param vmagent.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param vmagent.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: {}
      controlledResources: []
      maxAllowed: {}
      minAllowed: {}
      ## @param vmagent.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto
    ## @param vmagent.autoscaling.hpa.enabled Enable HPA for VictoriaMetrics Agent pods
    ## @param vmagent.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param vmagent.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param vmagent.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param vmagent.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""
  ## Node vmagent.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param vmagent.nodeAffinityPreset.type Node affinity preset type. Ignored if `vmagent.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param vmagent.nodeAffinityPreset.key Node label key to match. Ignored if `vmagent.affinity` is set
    ##
    key: ""
    ## @param vmagent.nodeAffinityPreset.values Node label values to match. Ignored if `vmagent.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param vmagent.affinity Affinity for VictoriaMetrics Agent pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `vmagent.podAffinityPreset`, `vmagent.podAntiAffinityPreset`, and `vmagent.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param vmagent.nodeSelector Node labels for VictoriaMetrics Agent pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param vmagent.tolerations Tolerations for VictoriaMetrics Agent pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param vmagent.updateStrategy.type VictoriaMetrics Agent statefulset strategy type
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## @param vmagent.priorityClassName VictoriaMetrics Agent pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param vmagent.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param vmagent.schedulerName Name of the k8s scheduler (other than default) for VictoriaMetrics Agent pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param vmagent.terminationGracePeriodSeconds Seconds Redmine pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param vmagent.lifecycleHooks for the VictoriaMetrics Agent container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param vmagent.extraEnvVars Array with extra environment variables to add to VictoriaMetrics Agent nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param vmagent.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for VictoriaMetrics Agent nodes
  ##
  extraEnvVarsCM: ""
  ## @param vmagent.extraEnvVarsSecret Name of existing Secret containing extra env vars for VictoriaMetrics Agent nodes
  ##
  extraEnvVarsSecret: ""
  ## @param vmagent.extraVolumes Optionally specify extra list of additional volumes for the VictoriaMetrics Agent pod(s)
  ##
  extraVolumes: []
  ## @param vmagent.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Agent container(s)
  ##
  extraVolumeMounts: []
  ## @param vmagent.sidecars Add additional sidecar containers to the VictoriaMetrics Agent pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param vmagent.initContainers Add additional init containers to the VictoriaMetrics Agent pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## @section VictoriaMetrics Agent RBAC Parameters
  ##
  ## RBAC configuration
  ##
  rbac:
    ## @param vmagent.rbac.create Specifies whether RBAC resources should be created
    ##
    create: true
    ## @param vmagent.rbac.rules Custom RBAC rules to set
    ## e.g:
    ## rules:
    ##   - apiGroups:
    ##       - ""
    ##     resources:
    ##       - pods
    ##     verbs:
    ##       - get
    ##       - list
    ##
    rules: []

  ## ServiceAccount configuration
  ##
  serviceAccount:
    ## @param vmagent.serviceAccount.create Specifies whether a ServiceAccount should be created
    ##
    create: true
    ## @param vmagent.serviceAccount.name The name of the ServiceAccount to use.
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param vmagent.serviceAccount.annotations Additional Service Account annotations (evaluated as a template)
    ##
    annotations: {}
    ## @param vmagent.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
    ##
    automountServiceAccountToken: false
  ## @section VictoriaMetrics Agent Traffic Exposure Parameters
  ##
  service:
    ## @param vmagent.service.type VictoriaMetrics Agent service type
    ##
    type: ClusterIP
    ## @param vmagent.service.ports.http VictoriaMetrics Agent service http port
    ## @param vmagent.service.ports.graphite VictoriaMetrics Agent service graphite port
    ## @param vmagent.service.ports.opentsdb VictoriaMetrics Agent service opentsdb port
    ## @param vmagent.service.ports.influxdb VictoriaMetrics Agent service influxdb port
    ##
    ports:
      http: 8429
      graphite: 2003
      opentsdb: 4242
      influxdb: 8089
    ## Node ports to expose
    ## @param vmagent.service.nodePorts.http Node port for HTTP
    ## @param vmagent.service.nodePorts.graphite Node port for graphite
    ## @param vmagent.service.nodePorts.opentsdb Node port for opentsdb
    ## @param vmagent.service.nodePorts.influxdb Node port for influxdb
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
      graphite: ""
      opentsdb: ""
      influxdb: ""
    ## @param vmagent.service.clusterIP VictoriaMetrics Agent service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param vmagent.service.loadBalancerIP VictoriaMetrics Agent service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param vmagent.service.loadBalancerSourceRanges VictoriaMetrics Agent service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param vmagent.service.externalTrafficPolicy VictoriaMetrics Agent service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param vmagent.service.annotations [object] Additional custom annotations for VictoriaMetrics Agent service
    ##
    annotations: {}
    ## @param vmagent.service.extraPorts Extra ports to expose in VictoriaMetrics Agent service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param vmagent.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param vmagent.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param vmagent.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param vmagent.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param vmagent.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param vmagent.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param vmagent.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param vmagent.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param vmagent.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}

  ## @section VictoriaMetrics Agent Metrics Parameters
  ##
  ## Prometheus metrics
  ##
  metrics:
    ## @param vmagent.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## @param vmagent.metrics.annotations Additional custom annotations for the service
    ##
    annotations: {}
    ## Prometheus Operator ServiceMonitor configuration
    ##
    serviceMonitor:
      ## @param vmagent.metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
      ##
      enabled: false
      ## @param vmagent.metrics.serviceMonitor.namespace Namespace in which Prometheus is running
      ##
      namespace: ""
      ## @param vmagent.metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
      ##
      annotations: {}
      ## @param vmagent.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param vmagent.metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
      ##
      jobLabel: ""
      ## @param vmagent.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
      ## @param vmagent.metrics.serviceMonitor.interval Interval at which metrics should be scraped.
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## interval: 10s
      ##
      interval: ""
      ## @param vmagent.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## scrapeTimeout: 10s
      ##
      scrapeTimeout: ""
      ## @param vmagent.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param vmagent.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param vmagent.metrics.serviceMonitor.selector Prometheus instance selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}

## @section VictoriaMetrics Alert Parameters
##
vmalert:
  ## @param vmalert.enabled Enable VictoriaMetrics Alert
  ##
  enabled: false
  ## Bitnami VictoriaMetrics Alert image
  ## ref: https://hub.docker.com/r/bitnami/victoriametrics-vmalert/tags/
  ## @param vmalert.image.registry [default: REGISTRY_NAME] VictoriaMetrics Alert image registry
  ## @param vmalert.image.repository [default: REPOSITORY_NAME/victoriametrics-vmalert] VictoriaMetrics Alert image repository
  ## @skip vmalert.image.tag VictoriaMetrics Alert image tag (immutable tags are recommended)
  ## @param vmalert.image.digest VictoriaMetrics Alert image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
  ## @param vmalert.image.pullPolicy VictoriaMetrics Alert image pull policy
  ## @param vmalert.image.pullSecrets VictoriaMetrics Alert image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/victoriametrics-vmalert
    tag: 1.124.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: http://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param vmalert.replicaCount Number of VictoriaMetrics Alert replicas to deploy
  ##
  replicaCount: 1
  ## @param vmalert.containerPorts.http VictoriaMetrics Alert http container port
  ##
  containerPorts:
    http: 8429
  ## Configure extra options for VictoriaMetrics Alert containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param vmalert.livenessProbe.enabled Enable livenessProbe on VictoriaMetrics Alert containers
  ## @param vmalert.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param vmalert.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param vmalert.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param vmalert.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param vmalert.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmalert.readinessProbe.enabled Enable readinessProbe on VictoriaMetrics Alert containers
  ## @param vmalert.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param vmalert.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param vmalert.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param vmalert.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param vmalert.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmalert.startupProbe.enabled Enable startupProbe on VictoriaMetrics Alert containers
  ## @param vmalert.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param vmalert.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param vmalert.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param vmalert.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param vmalert.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 10
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param vmalert.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param vmalert.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param vmalert.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## VictoriaMetrics Alert resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param vmalert.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if vmalert.resources is set (vmalert.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param vmalert.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param vmalert.datasourceUrl URL to an external datasource (uses VictoriaMetrics Insert if not set)
  ##
  datasourceUrl: ""
  ## @param vmalert.notifierUrl URL to a notifier like AlertManager (necessary when alert rules are set)
  ##
  notifierUrl: ""
  ## @param vmalert.deploymentAnnotations Annotations for VictoriaMetrics Alert Deployment
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  deploymentAnnotations: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param vmalert.podSecurityContext.enabled Enabled VictoriaMetrics Alert pods' Security Context
  ## @param vmalert.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param vmalert.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param vmalert.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param vmalert.podSecurityContext.fsGroup Set VictoriaMetrics Alert pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param vmalert.containerSecurityContext.enabled Enabled VictoriaMetrics Alert containers' Security Context
  ## @param vmalert.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param vmalert.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param vmalert.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param vmalert.containerSecurityContext.runAsNonRoot Set VictoriaMetrics Alert containers' Security Context runAsNonRoot
  ## @param vmalert.containerSecurityContext.privileged Set VictoriaMetrics Alert containers' Security Context privileged
  ## @param vmalert.containerSecurityContext.readOnlyRootFilesystem Set VictoriaMetrics Alert containers' Security Context runAsNonRoot
  ## @param vmalert.containerSecurityContext.allowPrivilegeEscalation Set VictoriaMetrics Alert container's privilege escalation
  ## @param vmalert.containerSecurityContext.capabilities.drop Set VictoriaMetrics Alert container's Security Context runAsNonRoot
  ## @param vmalert.containerSecurityContext.seccompProfile.type Set VictoriaMetrics Alert container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: RuntimeDefault
  ## @param vmalert.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param vmalert.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param vmalert.extraArgs Add extra arguments to the default command
  ##
  extraArgs: []
  ## @param vmalert.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: true
  ## @param vmalert.hostAliases VictoriaMetrics Alert pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param vmalert.podLabels Extra labels for VictoriaMetrics Alert pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param vmalert.podAnnotations Annotations for VictoriaMetrics Alert pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param vmalert.podAffinityPreset Pod affinity preset. Ignored if `vmalert.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param vmalert.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `vmalert.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param vmalert.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param vmalert.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param vmalert.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## @param vmalert.rulesConfigOverrides Overwrite or add extra rules configuration options to the chart default
  ## Example:
  ## rulesonfigOverrides:
  ##  groups:
  ##  - name: AlertGroupName
  ##    rules:
  ##     - alert: AlertName
  ##       expr: any_metric > 100
  ##       for: 30s
  ##       labels:
  ##          alertname: 'Any metric is too high'
  ##          severity: 'warning'
  ##
  rulesConfigOverrides: {}
  ## @param vmalert.existingRulesConfigMap The name of an existing ConfigMap with the rules configuration
  ##
  existingRulesConfigMap: ""
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param vmalert.autoscaling.vpa.enabled Enable VPA for VictoriaMetrics Alert pods
    ## @param vmalert.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param vmalert.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param vmalert.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param vmalert.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: {}
      controlledResources: []
      maxAllowed: {}
      minAllowed: {}
      ## @param vmalert.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto
    ## @param vmalert.autoscaling.hpa.enabled Enable HPA for VictoriaMetrics Alert pods
    ## @param vmalert.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param vmalert.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param vmalert.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param vmalert.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""
  ## Node vmalert.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param vmalert.nodeAffinityPreset.type Node affinity preset type. Ignored if `vmalert.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param vmalert.nodeAffinityPreset.key Node label key to match. Ignored if `vmalert.affinity` is set
    ##
    key: ""
    ## @param vmalert.nodeAffinityPreset.values Node label values to match. Ignored if `vmalert.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param vmalert.affinity Affinity for VictoriaMetrics Alert pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `vmalert.podAffinityPreset`, `vmalert.podAntiAffinityPreset`, and `vmalert.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param vmalert.nodeSelector Node labels for VictoriaMetrics Alert pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param vmalert.tolerations Tolerations for VictoriaMetrics Alert pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param vmalert.updateStrategy.type VictoriaMetrics Alert statefulset strategy type
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## @param vmalert.priorityClassName VictoriaMetrics Alert pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param vmalert.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param vmalert.schedulerName Name of the k8s scheduler (other than default) for VictoriaMetrics Alert pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param vmalert.terminationGracePeriodSeconds Seconds Redmine pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param vmalert.lifecycleHooks for the VictoriaMetrics Alert container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param vmalert.extraEnvVars Array with extra environment variables to add to VictoriaMetrics Alert nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param vmalert.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for VictoriaMetrics Alert nodes
  ##
  extraEnvVarsCM: ""
  ## @param vmalert.extraEnvVarsSecret Name of existing Secret containing extra env vars for VictoriaMetrics Alert nodes
  ##
  extraEnvVarsSecret: ""
  ## @param vmalert.extraVolumes Optionally specify extra list of additional volumes for the VictoriaMetrics Alert pod(s)
  ##
  extraVolumes: []
  ## @param vmalert.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the VictoriaMetrics Alert container(s)
  ##
  extraVolumeMounts: []
  ## @param vmalert.sidecars Add additional sidecar containers to the VictoriaMetrics Alert pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param vmalert.initContainers Add additional init containers to the VictoriaMetrics Alert pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []

  ## ServiceAccount configuration
  ##
  serviceAccount:
    ## @param vmalert.serviceAccount.create Specifies whether a ServiceAccount should be created
    ##
    create: true
    ## @param vmalert.serviceAccount.name The name of the ServiceAccount to use.
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param vmalert.serviceAccount.annotations Additional Service Account annotations (evaluated as a template)
    ##
    annotations: {}
    ## @param vmalert.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
    ##
    automountServiceAccountToken: false
  ## @section VictoriaMetrics Alert Traffic Exposure Parameters
  ##
  service:
    ## @param vmalert.service.type VictoriaMetrics Alert service type
    ##
    type: ClusterIP
    ## @param vmalert.service.ports.http VictoriaMetrics Alert service http port
    ##
    ports:
      http: 8429
    ## Node ports to expose
    ## @param vmalert.service.nodePorts.http Node port for HTTP
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
    ## @param vmalert.service.clusterIP VictoriaMetrics Alert service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param vmalert.service.loadBalancerIP VictoriaMetrics Alert service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param vmalert.service.loadBalancerSourceRanges VictoriaMetrics Alert service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param vmalert.service.externalTrafficPolicy VictoriaMetrics Alert service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param vmalert.service.annotations [object] Additional custom annotations for VictoriaMetrics Alert service
    ##
    annotations: {}
    ## @param vmalert.service.extraPorts Extra ports to expose in VictoriaMetrics Alert service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param vmalert.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param vmalert.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param vmalert.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param vmalert.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param vmalert.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param vmalert.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param vmalert.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param vmalert.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param vmalert.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}

  ## @section VictoriaMetrics Alert Metrics Parameters
  ##
  ## Prometheus metrics
  ##
  metrics:
    ## @param vmalert.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## @param vmalert.metrics.annotations Additional custom annotations for the service
    ##
    annotations: {}
    ## Prometheus Operator ServiceMonitor configuration
    ##
    serviceMonitor:
      ## @param vmalert.metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
      ##
      enabled: false
      ## @param vmalert.metrics.serviceMonitor.namespace Namespace in which Prometheus is running
      ##
      namespace: ""
      ## @param vmalert.metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
      ##
      annotations: {}
      ## @param vmalert.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param vmalert.metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
      ##
      jobLabel: ""
      ## @param vmalert.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
      ## @param vmalert.metrics.serviceMonitor.interval Interval at which metrics should be rulesd.
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## interval: 10s
      ##
      interval: ""
      ## @param vmalert.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ## e.g:
      ## scrapeTimeout: 10s
      ##
      scrapeTimeout: ""
      ## @param vmalert.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param vmalert.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param vmalert.metrics.serviceMonitor.selector Prometheus instance selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}

## @section Default Init Containers Parameters
##
defaultInitContainers:
  ## volumePermissions: Change the owner and group of the persistent volume(s) mountpoint(s) to 'runAsUser:fsGroup' on each node
  ##
  volumePermissions:
    ## @param defaultInitContainers.volumePermissions.enabled Enable init container that changes the owner/group of the PV mount point to `runAsUser:fsGroup`
    ##
    enabled: false
    ## OS Shell + Utility image
    ## ref: https://hub.docker.com/r/bitnami/os-shell/tags/
    ## @param defaultInitContainers.volumePermissions.image.registry [default: REGISTRY_NAME] OS Shell + Utility image registry
    ## @param defaultInitContainers.volumePermissions.image.repository [default: REPOSITORY_NAME/os-shell] OS Shell + Utility image repository
    ## @skip defaultInitContainers.volumePermissions.image.tag OS Shell + Utility image tag (immutable tags are recommended)
    ## @param defaultInitContainers.volumePermissions.image.digest OS Shell + Utility image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
    ## @param defaultInitContainers.volumePermissions.image.pullPolicy OS Shell + Utility image pull policy
    ## @param defaultInitContainers.volumePermissions.image.pullSecrets OS Shell + Utility image pull secrets
    ##
    image:
      registry: docker.io
      repository: bitnami/os-shell
      tag: 12-debian-12-r50
      digest: ""
      pullPolicy: IfNotPresent
      ## Optionally specify an array of imagePullSecrets.
      ## Secrets must be manually created in the namespace.
      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
      ## e.g:
      ## pullSecrets:
      ##   - myRegistryKeySecretName
      ##
      pullSecrets: []
    ## Init container's resource requests and limits
    ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
    ## @param defaultInitContainers.volumePermissions.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).
    ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
    ##
    resourcesPreset: "nano"
    ## @param defaultInitContainers.volumePermissions.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
    ## Example:
    ## resources:
    ##   requests:
    ##     cpu: 2
    ##     memory: 512Mi
    ##   limits:
    ##     cpu: 3
    ##     memory: 1024Mi
    ##
    resources: {}
    ## Init container' Security Context
    ## Note: the chown of the data folder is done to containerSecurityContext.runAsUser
    ## and not the below volumePermissions.containerSecurityContext.runAsUser
    ## @param defaultInitContainers.volumePermissions.containerSecurityContext.enabled Enable securityContext in the init container
    ## @param defaultInitContainers.volumePermissions.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
    ## @param defaultInitContainers.volumePermissions.containerSecurityContext.runAsUser User ID for the init container
    ##
    containerSecurityContext:
      enabled: true
      seLinuxOptions: {}
      runAsUser: 0
