CHART NAME: {{ .Chart.Name }}
CHART VERSION: {{ .Chart.Version }}
APP VERSION: {{ .Chart.AppVersion }}

⚠ WARNING: Since August 28th, 2025, only a limited subset of images/charts are available for free.
    Subscribe to Bitnami Secure Images to receive continued support and security updates.
    More info at https://bitnami.com and https://github.com/bitnami/containers/issues/83267

** Please be patient while the chart is being deployed **

The following controllers have been deployed:

  - vmselect
  - vminsert
  - vmstorage
  {{- if .Values.vmauth.enabled }}
  - vmauth
  {{- end }}
  {{- if .Values.vmagent.enabled }}
  - vmagent
  {{- end }}
  {{- if .Values.vmalert.enabled }}
  - vmalert
  {{- end }}

Check the status of the pods by running this command:

  kubectl get pods --namespace {{ include "common.names.namespace" . | quote }} -l app.kubernetes.io/instance={{ .Release.Name }}

{{- if .Values.vmauth.enabled }}
Your VictoriaMetrics site can be accessed through the following DNS name from within your cluster:

    {{ include "victoriametrics.vmauth.fullname" . }}.{{ .Release.Namespace }}.svc.{{ .Values.clusterDomain }} (port {{ .Values.vmauth.service.ports.http }})

To access your VictoriaMetrics site from outside the cluster follow the steps below:

{{- if .Values.vmauth.ingress.enabled }}

Get the VictoriaMetrics URL and associate VictoriaMetrics hostname to your cluster external IP:

   export CLUSTER_IP=$(minikube ip) # On Minikube. Use: `kubectl cluster-info` on others K8s clusters
   echo "VictoriaMetrics Select URL: http{{ if .Values.vmauth.ingress.tls }}s{{ end }}://{{ .Values.vmauth.ingress.hostname }}/select"
   echo "VictoriaMetrics Insert URL: http{{ if .Values.vmauth.ingress.tls }}s{{ end }}://{{ .Values.vmauth.ingress.hostname }}/insert"
   echo "$CLUSTER_IP  {{ .Values.vmauth.ingress.hostname }}" | sudo tee -a /etc/hosts

{{- else }}
{{- $port := .Values.vmauth.service.ports.http | toString }}

Get the VictoriaMetrics URL by running these commands:

{{- if contains "NodePort" .Values.vmauth.service.type }}

   export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "victoriametrics.vmauth.fullname" . }})
   export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
   echo "VictoriaMetrics Select URL: http://$NODE_IP:$NODE_PORT/select"
   echo "VictoriaMetrics Insert URL: http://$NODE_IP:$NODE_PORT/insert"

{{- else if contains "LoadBalancer" .Values.vmauth.service.type }}

  NOTE: It may take a few minutes for the LoadBalancer IP to be available.
        Watch the status with: 'kubectl get svc --namespace {{ .Release.Namespace }} -w {{ include "victoriametrics.vmauth.fullname" . }}'

   export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "victoriametrics.vmauth.fullname" . }} --template "{{ "{{ range (index .status.loadBalancer.ingress 0) }}{{ . }}{{ end }}" }}")
   echo "VictoriaMetrics Select URL: http://$SERVICE_IP{{- if ne $port "80" }}:{{ .Values.vmauth.service.ports.http }}{{ end }}/select"
   echo "VictoriaMetrics Insert URL: http://$SERVICE_IP{{- if ne $port "80" }}:{{ .Values.vmauth.service.ports.http }}{{ end }}/select"

{{- else if contains "ClusterIP"  .Values.vmauth.service.type }}

   kubectl port-forward --namespace {{ .Release.Namespace }} svc/{{ include "victoriametrics.vmauth.fullname" . }} {{ .Values.vmauth.service.ports.http }}:{{ .Values.vmauth.service.ports.http }} &
   echo "VictoriaMetrics Select URL: http://127.0.0.1{{- if ne $port "80" }}:{{ .Values.vmauth.service.ports.http }}{{ end }}/select"
   echo "VictoriaMetrics Insert URL: http://127.0.0.1{{- if ne $port "80" }}:{{ .Values.vmauth.service.ports.http }}{{ end }}/insert"

{{- end }}
{{- end }}
{{- else }}

Your VictoriaMetrics Select site can be accessed through the following DNS name from within your cluster:

    {{ include "victoriametrics.vmselect.fullname" . }}.{{ .Release.Namespace }}.svc.{{ .Values.clusterDomain }} (port {{ .Values.vmselect.service.ports.http }})

To access your VictoriaMetrics site from outside the cluster follow the steps below:

{{- if .Values.vmselect.ingress.enabled }}

Get the VictoriaMetrics URL and associate VictoriaMetrics hostname to your cluster external IP:

   export CLUSTER_IP=$(minikube ip) # On Minikube. Use: `kubectl cluster-info` on others K8s clusters
   echo "VictoriaMetrics Select URL: http{{ if .Values.vmselect.ingress.tls }}s{{ end }}://{{ .Values.vmselect.ingress.hostname }}/select"
   echo "$CLUSTER_IP  {{ .Values.vmselect.ingress.hostname }}" | sudo tee -a /etc/hosts

{{- else }}
{{- $port := .Values.vmselect.service.ports.http | toString }}

Get the VictoriaMetrics URL by running these commands:

{{- if contains "NodePort" .Values.vmselect.service.type }}

   export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "victoriametrics.vmselect.fullname" . }})
   export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
   echo "VictoriaMetrics Select URL: http://$NODE_IP:$NODE_PORT/select"

{{- else if contains "LoadBalancer" .Values.vmselect.service.type }}

  NOTE: It may take a few minutes for the LoadBalancer IP to be available.
        Watch the status with: 'kubectl get svc --namespace {{ .Release.Namespace }} -w {{ include "victoriametrics.vmselect.fullname" . }}'

   export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "victoriametrics.vmselect.fullname" . }} --template "{{ "{{ range (index .status.loadBalancer.ingress 0) }}{{ . }}{{ end }}" }}")
   echo "VictoriaMetrics Select URL: http://$SERVICE_IP{{- if ne $port "80" }}:{{ .Values.vmselect.service.ports.http }}{{ end }}/select"

{{- else if contains "ClusterIP"  .Values.vmselect.service.type }}

   kubectl port-forward --namespace {{ .Release.Namespace }} svc/{{ include "victoriametrics.vmselect.fullname" . }} {{ .Values.vmselect.service.ports.http }}:{{ .Values.vmselect.service.ports.http }} &
   echo "VictoriaMetrics Select URL: http://127.0.0.1{{- if ne $port "80" }}:{{ .Values.vmselect.service.ports.http }}{{ end }}/select"

{{- end }}
{{- end }}

Your VictoriaMetrics Insert site can be accessed through the following DNS name from within your cluster:

    {{ include "victoriametrics.vminsert.fullname" . }}.{{ .Release.Namespace }}.svc.{{ .Values.clusterDomain }} (port {{ .Values.vminsert.service.ports.http }})

To access your VictoriaMetrics site from outside the cluster follow the steps below:

{{- if .Values.vminsert.ingress.enabled }}

Get the VictoriaMetrics URL and associate VictoriaMetrics hostname to your cluster external IP:

   export CLUSTER_IP=$(minikube ip) # On Minikube. Use: `kubectl cluster-info` on others K8s clusters
   echo "VictoriaMetrics Insert URL: http{{ if .Values.vminsert.ingress.tls }}s{{ end }}://{{ .Values.vminsert.ingress.hostname }}/insert"
   echo "$CLUSTER_IP  {{ .Values.vminsert.ingress.hostname }}" | sudo tee -a /etc/hosts

{{- else }}
{{- $port := .Values.vminsert.service.ports.http | toString }}

Get the VictoriaMetrics URL by running these commands:

{{- if contains "NodePort" .Values.vminsert.service.type }}

   export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "victoriametrics.vminsert.fullname" . }})
   export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
   echo "VictoriaMetrics Insert URL: http://$NODE_IP:$NODE_PORT/insert"

{{- else if contains "LoadBalancer" .Values.vminsert.service.type }}

  NOTE: It may take a few minutes for the LoadBalancer IP to be available.
        Watch the status with: 'kubectl get svc --namespace {{ .Release.Namespace }} -w {{ include "victoriametrics.vminsert.fullname" . }}'

   export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "victoriametrics.vminsert.fullname" . }} --template "{{ "{{ range (index .status.loadBalancer.ingress 0) }}{{ . }}{{ end }}" }}")
   echo "VictoriaMetrics Insert URL: http://$SERVICE_IP{{- if ne $port "80" }}:{{ .Values.vminsert.service.ports.http }}{{ end }}/insert"

{{- else if contains "ClusterIP"  .Values.vminsert.service.type }}

   kubectl port-forward --namespace {{ .Release.Namespace }} svc/{{ include "victoriametrics.vminsert.fullname" . }} {{ .Values.vminsert.service.ports.http }}:{{ .Values.vminsert.service.ports.http }} &
   echo "VictoriaMetrics Insert URL: http://127.0.0.1{{- if ne $port "80" }}:{{ .Values.vminsert.service.ports.http }}{{ end }}/insert"

{{- end }}
{{- end }}

{{- end }}

{{- include "common.warnings.rollingTag" .Values.vmselect.image }}
{{- include "common.warnings.rollingTag" .Values.vminsert.image }}
{{- include "common.warnings.rollingTag" .Values.vmstorage.image }}
{{- include "common.warnings.rollingTag" .Values.vmauth.image }}
{{- include "common.warnings.rollingTag" .Values.vmagent.image }}
{{- include "common.warnings.rollingTag" .Values.vmalert.image }}
{{- include "victoriametrics.validateValues" . }}
{{- include "common.warnings.resources" (dict "sections" (list "vmselect" "vmstorage" "vminsert" "vmauth" "vmagent" "vmalert" "defaultInitContainers.volumePermissions") "context" $) }}
{{- include "common.warnings.modifiedImages" (dict "images" (list .Values.vmselect.image .Values.vminsert.image .Values.vmstorage.image .Values.vmauth.image .Values.vmagent.image .Values.vmalert.image .Values.defaultInitContainers.volumePermissions.image) "context" $) }}
{{- include "common.errors.insecureImages" (dict "images" (list .Values.vmselect.image .Values.vminsert.image .Values.vmstorage.image .Values.vmauth.image .Values.vmagent.image .Values.vmalert.image .Values.defaultInitContainers.volumePermissions.image) "context" $) }}