# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    ##
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters

## @param nameOverride String to partially override nginx.fullname template (will maintain the release name)
##
nameOverride: ""
## @param fullnameOverride String to fully override nginx.fullname template
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""
## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
##
kubeVersion: ""
## @param clusterDomain Kubernetes Cluster Domain
##
clusterDomain: cluster.local
## @param extraDeploy Extra objects to deploy (value evaluated as a template)
##
extraDeploy: []
## @param commonLabels Add labels to all the deployed resources
##
commonLabels: {}
## @param commonAnnotations Add annotations to all the deployed resources
##
commonAnnotations: {}
## Enable diagnostic mode in the deployment(s)/statefulset(s)
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the the deployment(s)/statefulset(s)
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the the deployment(s)/statefulset(s)
  ##
  args:
    - infinity
## @section NGINX parameters

## Bitnami NGINX image version
## ref: https://hub.docker.com/r/bitnami/nginx/tags/
## @param image.registry [default: REGISTRY_NAME] NGINX image registry
## @param image.repository [default: REPOSITORY_NAME/nginx] NGINX image repository
## @skip image.tag NGINX image tag (immutable tags are recommended)
## @param image.digest NGINX image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy NGINX image pull policy
## @param image.pullSecrets Specify docker-registry secret names as an array
## @param image.debug Set to true if you would like to see extra information on logs
##
image:
  registry: docker.io
  repository: bitnami/nginx
  tag: 1.29.1-debian-12-r0
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## E.g.:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
  ## Set to true if you would like to see extra information on logs
  ##
  debug: false
## @param enableDefaultInitContainers If set to false, disable all init containers except user-defined at `initContainer`.
##
enableDefaultInitContainers: true
## @param automountServiceAccountToken Mount Service Account token in pod
##
automountServiceAccountToken: false
## @param hostAliases Deployment pod host aliases
## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
##
hostAliases: []
## Command and args for running the container (set to default if not set). Use array form
## @param command Override default container command (useful when using custom images)
## @param args Override default container args (useful when using custom images)
##
command: []
args: []
## @param extraEnvVars Extra environment variables to be set on NGINX containers
## E.g:
## extraEnvVars:
##   - name: FOO
##     value: BAR
##
extraEnvVars: []
## @param extraEnvVarsCM ConfigMap with extra environment variables
##
extraEnvVarsCM: ""
## @param extraEnvVarsSecret Secret with extra environment variables
##
extraEnvVarsSecret: ""
## @section NGINX deployment parameters

## @param replicaCount Number of NGINX replicas to deploy
##
replicaCount: 1
## @param revisionHistoryLimit The number of old history to retain to allow rollback
##
revisionHistoryLimit: 10
## @param updateStrategy.type NGINX deployment strategy type
## @param updateStrategy.rollingUpdate NGINX deployment rolling update configuration parameters
## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
##
updateStrategy:
  type: RollingUpdate
  rollingUpdate: {}
## @param podLabels Additional labels for NGINX pods
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
##
podLabels: {}
## @param podAnnotations Annotations for NGINX pods
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}
## @param podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAffinityPreset: ""
## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAntiAffinityPreset: soft
## Node affinity preset
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
##
nodeAffinityPreset:
  ## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ##
  type: ""
  ## @param nodeAffinityPreset.key Node label key to match Ignored if `affinity` is set.
  ## E.g.
  ## key: "kubernetes.io/e2e-az-name"
  ##
  key: ""
  ## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set.
  ## E.g.
  ## values:
  ##   - e2e-az1
  ##   - e2e-az2
  ##
  values: []
## @param affinity Affinity for pod assignment
## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
## Note: podAffinityPreset, podAntiAffinityPreset, and  nodeAffinityPreset will be ignored when it's set
##
affinity: {}
## @param hostNetwork Specify if host network should be enabled for NGINX pod
##
hostNetwork: false
## @param hostIPC Specify if host IPC should be enabled for NGINX pod
##
hostIPC: false
## DNS-Pod services
## Ref: https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/
## @param dnsPolicy Specifies the DNS policy for the NGINX pod
## DNS policies can be set on a per-Pod basis. Currently Kubernetes supports the following Pod-specific DNS policies.
## Available options: Default, ClusterFirst, ClusterFirstWithHostNet, None
## Ref: https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#pod-s-dns-policy
dnsPolicy: ""
## @param dnsConfig  Allows users more control on the DNS settings for a Pod. Required if `dnsPolicy` is set to `None`
## The dnsConfig field is optional and it can work with any dnsPolicy settings.
## Ref: https://kubernetes.io/docs/concepts/services-networking/dns-pod-service/#pod-dns-config
## E.g.
## dnsConfig:
##   nameservers:
##     - 192.0.2.1 # this is an example
##   searches:
##     - ns1.svc.cluster-domain.example
##     - my.dns.search.suffix
##   options:
##     - name: ndots
##       value: "2"
##     - name: edns0
dnsConfig: {}
## @param nodeSelector Node labels for pod assignment. Evaluated as a template.
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
##
nodeSelector: {}
## @param tolerations Tolerations for pod assignment. Evaluated as a template.
## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
## @param priorityClassName NGINX pods' priorityClassName
##
priorityClassName: ""
## @param schedulerName Name of the k8s scheduler (other than default)
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""
## @param terminationGracePeriodSeconds In seconds, time the given to the NGINX pod needs to terminate gracefully
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
##
terminationGracePeriodSeconds: ""
## @param topologySpreadConstraints Topology Spread Constraints for pod assignment
## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
## The value is evaluated as a template
##
topologySpreadConstraints: []
## TLS settings
##
tls:
  ## @param tls.enabled Enable TLS transport
  ##
  enabled: true
  ## @param tls.autoGenerated Auto-generate self-signed certificates
  ##
  autoGenerated: true
  ## @param tls.existingSecret Name of a secret containing the certificates
  ##
  existingSecret: ""
  ## @param tls.certFilename Path of the certificate file when mounted as a secret
  ##
  certFilename: tls.crt
  ## @param tls.certKeyFilename Path of the certificate key file when mounted as a secret
  ##
  certKeyFilename: tls.key
  ## @param tls.certCAFilename Path of the certificate CA file when mounted as a secret
  ##
  certCAFilename: ca.crt
  ## @param tls.cert Content of the certificate to be added to the secret
  ##
  cert: ""
  ## @param tls.key Content of the certificate key to be added to the secret
  ##
  key: ""
  ## @param tls.ca Content of the certificate CA to be added to the secret
  ##
  ca: ""
## NGINX pods' Security Context.
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
## @param podSecurityContext.enabled Enabled NGINX pods' Security Context
## @param podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
## @param podSecurityContext.supplementalGroups Set filesystem extra groups
## @param podSecurityContext.fsGroup Set NGINX pod's Security Context fsGroup
## @param podSecurityContext.sysctls sysctl settings of the NGINX pods
##
podSecurityContext:
  enabled: true
  fsGroupChangePolicy: Always
  supplementalGroups: []
  fsGroup: 1001
  ## sysctl settings
  ## Example:
  ## sysctls:
  ## - name: net.core.somaxconn
  ##   value: "10000"
  ##
  sysctls: []
## NGINX containers' Security Context.
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## @param containerSecurityContext.enabled Enabled containers' Security Context
## @param containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
## @param containerSecurityContext.runAsUser Set containers' Security Context runAsUser
## @param containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
## @param containerSecurityContext.runAsNonRoot Set container's Security Context runAsNonRoot
## @param containerSecurityContext.privileged Set container's Security Context privileged
## @param containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
## @param containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
## @param containerSecurityContext.capabilities.drop List of capabilities to be dropped
## @param containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
##
containerSecurityContext:
  enabled: true
  seLinuxOptions: {}
  runAsUser: 1001
  runAsGroup: 1001
  runAsNonRoot: true
  privileged: false
  readOnlyRootFilesystem: true
  allowPrivilegeEscalation: false
  capabilities:
    drop: ["ALL"]
  seccompProfile:
    type: "RuntimeDefault"
## Configures the ports NGINX listens on
## @param containerPorts.http Sets http port inside NGINX container
## @param containerPorts.https Sets https port inside NGINX container
##
containerPorts:
  http: 8080
  https: 8443
## @param extraContainerPorts Array of additional container ports for the Nginx container
## e.g:
## extraContainerPorts:
##   - name: grpc
##     containerPort: 4317
##
extraContainerPorts: []
## NGINX containers' resource requests and limits
## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
## We usually recommend not to specify default resources and to leave this as a conscious
## choice for the user. This also increases chances charts run on environments with little
## resources, such as Minikube. If you do want to specify resources, uncomment the following
## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
## @param resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
##
resourcesPreset: "nano"
## @param resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
## Example:
## resources:
##   requests:
##     cpu: 2
##     memory: 512Mi
##   limits:
##     cpu: 3
##     memory: 1024Mi
##
resources: {}
## NGINX containers' lifecycleHooks
## ref: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/attach-handler-lifecycle-event/
## If you do want to specify lifecycleHooks, uncomment the following
## lines, adjust them as necessary, and remove the curly braces on 'lifecycle:{}'.
## @param lifecycleHooks Optional lifecycleHooks for the NGINX container
lifecycleHooks: {}
## Example:
## postStart:
##   exec:
##     command: ["/bin/sh", "-c", "echo Hello from the postStart handler > /usr/share/message"]
## Example:
## preStop:
##   exec:
##     command: ["/bin/sleep", "20"]
##     command: ["/bin/sh","-c","nginx -s quit; while killall -0 nginx; do sleep 1; done"]

## NGINX containers' startup probe.
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
## @param startupProbe.enabled Enable startupProbe
## @param startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
## @param startupProbe.periodSeconds Period seconds for startupProbe
## @param startupProbe.timeoutSeconds Timeout seconds for startupProbe
## @param startupProbe.failureThreshold Failure threshold for startupProbe
## @param startupProbe.successThreshold Success threshold for startupProbe
##
startupProbe:
  enabled: false
  initialDelaySeconds: 30
  timeoutSeconds: 5
  periodSeconds: 10
  failureThreshold: 6
  successThreshold: 1
## NGINX containers' liveness probe.
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
## @param livenessProbe.enabled Enable livenessProbe
## @param livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
## @param livenessProbe.periodSeconds Period seconds for livenessProbe
## @param livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
## @param livenessProbe.failureThreshold Failure threshold for livenessProbe
## @param livenessProbe.successThreshold Success threshold for livenessProbe
##
livenessProbe:
  enabled: true
  initialDelaySeconds: 30
  timeoutSeconds: 5
  periodSeconds: 10
  failureThreshold: 6
  successThreshold: 1
## NGINX containers' readiness probe.
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
## @param readinessProbe.enabled Enable readinessProbe
## @param readinessProbe.path Request path for livenessProbe
## @param readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
## @param readinessProbe.periodSeconds Period seconds for readinessProbe
## @param readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
## @param readinessProbe.failureThreshold Failure threshold for readinessProbe
## @param readinessProbe.successThreshold Success threshold for readinessProbe
##
readinessProbe:
  enabled: true
  path: /
  initialDelaySeconds: 5
  timeoutSeconds: 3
  periodSeconds: 5
  failureThreshold: 3
  successThreshold: 1
## @param customStartupProbe Custom liveness probe for the Web component
##
customStartupProbe: {}
## @param customLivenessProbe Override default liveness probe
##
customLivenessProbe: {}
## @param customReadinessProbe Override default readiness probe
##
customReadinessProbe: {}
## Autoscaling parameters
## @param autoscaling.enabled Enable autoscaling for NGINX deployment
## @param autoscaling.minReplicas Minimum number of replicas to scale back
## @param autoscaling.maxReplicas Maximum number of replicas to scale out
## @param autoscaling.targetCPU Target CPU utilization percentage
## @param autoscaling.targetMemory Target Memory utilization percentage
##
autoscaling:
  enabled: false
  minReplicas: ""
  maxReplicas: ""
  targetCPU: ""
  targetMemory: ""
## @param extraVolumes Array to add extra volumes
##
extraVolumes: []
## @param extraVolumeMounts Array to add extra mount
##
extraVolumeMounts: []
## Pods Service Account
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
##
serviceAccount:
  ## @param serviceAccount.create Enable creation of ServiceAccount for nginx pod
  ##
  create: true
  ## @param serviceAccount.name The name of the ServiceAccount to use.
  ## If not set and create is true, a name is generated using the `common.names.fullname` template
  name: ""
  ## @param serviceAccount.annotations Annotations for service account. Evaluated as a template.
  ## Only used if `create` is `true`.
  ##
  annotations: {}
  ## @param serviceAccount.automountServiceAccountToken Auto-mount the service account token in the pod
  ##
  automountServiceAccountToken: false
## @param sidecars Sidecar parameters
## e.g:
## sidecars:
##   - name: your-image-name
##     image: your-image
##     imagePullPolicy: Always
##     ports:
##       - name: portname
##         containerPort: 1234
##
sidecars: []
## @param sidecarSingleProcessNamespace Enable sharing the process namespace with sidecars
## This will switch pod.spec.shareProcessNamespace parameter
##
sidecarSingleProcessNamespace: false
## @param initContainers Extra init containers
##
initContainers: []
## Pod Disruption Budget configuration
## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
##
pdb:
  ## @param pdb.create Created a PodDisruptionBudget
  ##
  create: true
  ## @param pdb.minAvailable Min number of pods that must still be available after the eviction.
  ## You can specify an integer or a percentage by setting the value to a string representation of a percentage (eg. "50%"). It will be disabled if set to 0
  ##
  minAvailable: ""
  ## @param pdb.maxUnavailable Max number of pods that can be unavailable after the eviction.
  ## You can specify an integer or a percentage by setting the value to a string representation of a percentage (eg. "50%"). It will be disabled if set to 0. Defaults to `1` if both `pdb.minAvailable` and `pdb.maxUnavailable` are empty.
  ##
  maxUnavailable: ""
## @section Custom NGINX application parameters

## Get the server static content from a git repository
## NOTE: This will override staticSiteConfigmap and staticSitePVC
##
cloneStaticSiteFromGit:
  ## @param cloneStaticSiteFromGit.enabled Get the server static content from a Git repository
  ##
  enabled: false
  ## Bitnami Git image version
  ## ref: https://hub.docker.com/r/bitnami/git/tags/
  ## @param cloneStaticSiteFromGit.image.registry [default: REGISTRY_NAME] Git image registry
  ## @param cloneStaticSiteFromGit.image.repository [default: REPOSITORY_NAME/git] Git image repository
  ## @skip cloneStaticSiteFromGit.image.tag Git image tag (immutable tags are recommended)
  ## @param cloneStaticSiteFromGit.image.digest Git image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param cloneStaticSiteFromGit.image.pullPolicy Git image pull policy
  ## @param cloneStaticSiteFromGit.image.pullSecrets Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/git
    tag: 2.51.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param cloneStaticSiteFromGit.repository Git Repository to clone static content from
  ##
  repository: ""
  ## @param cloneStaticSiteFromGit.branch Git branch to checkout
  ##
  branch: ""
  ## @param cloneStaticSiteFromGit.interval Interval for sidecar container pull from the Git repository
  ##
  interval: 60
  ## Additional configuration for git-clone-repository initContainer
  ##
  gitClone:
    ## @param cloneStaticSiteFromGit.gitClone.command Override default container command for git-clone-repository
    ##
    command: []
    ## @param cloneStaticSiteFromGit.gitClone.args Override default container args for git-clone-repository
    ##
    args: []
  ## Additional configuration for the git-repo-syncer container
  ##
  gitSync:
    ## @param cloneStaticSiteFromGit.gitSync.command Override default container command for git-repo-syncer
    ##
    command: []
    ## @param cloneStaticSiteFromGit.gitSync.args Override default container args for git-repo-syncer
    ##
    args: []
    ## git-repo-syncer resource requests and limits
    ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
    ## @param cloneStaticSiteFromGit.gitSync.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if cloneStaticSiteFromGit.gitSync.resources is set (cloneStaticSiteFromGit.gitSync.resources is recommended for production).
    ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
    ##
    resourcesPreset: "nano"
    ## @param cloneStaticSiteFromGit.gitSync.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
    ## Example:
    ## resources:
    ##   requests:
    ##     cpu: 2
    ##     memory: 512Mi
    ##   limits:
    ##     cpu: 3
    ##     memory: 1024Mi
    ##
    resources: {}
  ## @param cloneStaticSiteFromGit.extraEnvVars Additional environment variables to set for the in the containers that clone static site from git
  ## E.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: BAR
  ##
  extraEnvVars: []
  ## @param cloneStaticSiteFromGit.extraEnvVarsSecret Secret with extra environment variables
  ##
  extraEnvVarsSecret: ""
  ## @param cloneStaticSiteFromGit.extraVolumeMounts Add extra volume mounts for the Git containers
  ## Useful to mount keys to connect through ssh. (normally used with extraVolumes)
  ## E.g:
  ## extraVolumeMounts:
  ##   - name: ssh-dir
  ##     mountPath: /root/.ssh/
  ##
  extraVolumeMounts: []
## @param serverBlock Custom server block to be added to NGINX configuration
## PHP-FPM example server block:
## serverBlock: |-
##   server {
##     listen 0.0.0.0:8080;
##     root /app;
##     location / {
##       index index.html index.php;
##     }
##     location ~ \.php$ {
##       fastcgi_pass phpfpm-server:9000;
##       fastcgi_index index.php;
##       include fastcgi.conf;
##     }
##   }
##
serverBlock: ""
## @param streamServerBlock Custom stream server block to be added to NGINX configuration
## streamServerBlock: |-
##   server {
##     listen 0.0.0.0:8080 udp;
##     proxy_pass localhost:9000;
##   }
##
streamServerBlock: ""
## @param existingServerBlockConfigmap ConfigMap with custom server block to be added to NGINX configuration
## NOTE: This will override serverBlock
##
existingServerBlockConfigmap: ""
## @param existingStreamServerBlockConfigmap ConfigMap with custom stream server block to be added to NGINX configuration
## NOTE: This will override streamServerBlock
##
existingStreamServerBlockConfigmap: ""
## Collection of NGINX context based includes
## e.g:
## contextIncludes:
##   main: |
##     load_module /opt/bitnami/nginx/modules/ngx_http_dav_module.so;
##
contextIncludes:
  ## @param contextIncludes.main Custom configuration for the main context
  ##
  main: ""
  ## @param contextIncludes.events Custom configuration for the events context
  ##
  events: ""
  ## @param contextIncludes.http Custom configuration for the http context
  ##
  http: ""
## @param existingContextMainConfigmaps List of existing ConfigMaps with custom main context configuration
## NOTE: These will be mounted alongside contextIncludes.main
## e.g:
## existingContextMainConfigmaps:
##   - "my-modules-config"
##   - "my-main-directives-config"
##
existingContextMainConfigmaps: []
## @param existingContextEventsConfigmaps List of existing ConfigMaps with custom events context configuration
## NOTE: These will be mounted alongside contextIncludes.events
##
existingContextEventsConfigmaps: []
## @param existingContextHttpConfigmaps List of existing ConfigMaps with custom http context configuration
## NOTE: These will be mounted alongside contextIncludes.http
##
existingContextHttpConfigmaps: []
## @param staticSiteConfigmap Name of existing ConfigMap with the server static site content
##
staticSiteConfigmap: ""
## @param staticSitePVC Name of existing PVC with the server static site content
## NOTE: This will override staticSiteConfigmap
##
staticSitePVC: ""
## @section Traffic Exposure parameters

## NGINX Service properties
##
service:
  ## @param service.type Service type
  ##
  type: LoadBalancer
  ## @param service.ports.http Service HTTP port
  ## @param service.ports.https Service HTTPS port
  ##
  ports:
    http: 80
    https: 443
  ##
  ## @param service.nodePorts [object] Specify the nodePort(s) value(s) for the LoadBalancer and NodePort service types.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
  ##
  nodePorts:
    http: ""
    https: ""
  ## @param service.targetPort [object] Target port reference value for the Loadbalancer service types can be specified explicitly.
  ## Listeners for the Loadbalancer can be custom mapped to the http or https service.
  ## Example: Mapping the https listener to targetPort http [http: https]
  ##
  targetPort:
    http: http
    https: https
  ## @param service.clusterIP NGINX service Cluster IP
  ## e.g.:
  ## clusterIP: None
  ##
  clusterIP: ""
  ## @param service.loadBalancerIP LoadBalancer service IP address
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
  ##
  loadBalancerIP: ""
  ## @param service.loadBalancerSourceRanges NGINX service Load Balancer sources
  ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
  ## e.g:
  ## loadBalancerSourceRanges:
  ##   - 10.10.10.0/24
  ##
  loadBalancerSourceRanges: []
  ## @param service.loadBalancerClass service Load Balancer class if service type is `LoadBalancer` (optional, cloud specific)
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
  ##
  loadBalancerClass: ""
  ## @param service.extraPorts Extra ports to expose (normally used with the `sidecar` value)
  ##
  extraPorts: []
  ## @param service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
  ## If "ClientIP", consecutive client requests will be directed to the same Pod
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
  ##
  sessionAffinity: None
  ## @param service.sessionAffinityConfig Additional settings for the sessionAffinity
  ## sessionAffinityConfig:
  ##   clientIP:
  ##     timeoutSeconds: 300
  ##
  sessionAffinityConfig: {}
  ## @param service.annotations Service annotations
  ## This can be used to set the LoadBalancer service type to internal only.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
  ##
  annotations: {}
  ## @param service.externalTrafficPolicy Enable client source IP preservation
  ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
  ##
  externalTrafficPolicy: Cluster
## Network Policies
## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Specifies whether a NetworkPolicy should be created
  ##
  enabled: true
  ## @param networkPolicy.allowExternal Don't require server label for connections
  ## The Policy model to apply. When set to false, only pods with the correct
  ## server label will have network access to the ports server is listening
  ## on. When true, server will accept connections from any source
  ## (with the correct destination port).
  ##
  allowExternal: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}
## Configure the ingress resource that allows you to access the
## Nginx installation. Set up the URL
## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/
##
ingress:
  ## @param ingress.enabled Set to true to enable ingress record generation
  ##
  enabled: false
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param ingress.pathType Ingress path type
  ##
  pathType: ImplementationSpecific
  ## @param ingress.apiVersion Force Ingress API version (automatically detected if not set)
  ##
  apiVersion: ""
  ## @param ingress.hostname Default host for the ingress resource
  ##
  hostname: nginx.local
  ## @param ingress.path The Path to Nginx. You may need to set this to '/*' in order to use this with ALB ingress controllers.
  ##
  path: /
  ## @param ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
  ## For a full list of possible ingress annotations, please see
  ## ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/nginx-configuration/annotations.md
  ## Use this parameter to set the required annotations for cert-manager, see
  ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
  ##
  ## e.g:
  ## annotations:
  ##   kubernetes.io/ingress.class: nginx
  ##   cert-manager.io/cluster-issuer: cluster-issuer-name
  ##
  annotations: {}
  ## @param ingress.ingressClassName Set the ingerssClassName on the ingress record for k8s 1.18+
  ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
  ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
  ##
  ingressClassName: ""
  ## @param ingress.tls Create TLS Secret
  ## TLS certificates will be retrieved from a TLS secret with name: {{- printf "%s-tls" .Values.ingress.hostname }}
  ## You can use the ingress.secrets parameter to create this TLS secret or relay on cert-manager to create it
  ##
  tls: false
  ## @param ingress.tlsWwwPrefix Adds www subdomain to default cert
  ## Creates tls host with ingress.hostname: {{ print "www.%s" .Values.ingress.hostname }}
  ## Is enabled if "nginx.ingress.kubernetes.io/from-to-www-redirect" is "true"
  tlsWwwPrefix: false
  ## @param ingress.extraHosts The list of additional hostnames to be covered with this ingress record.
  ## Most likely the hostname above will be enough, but in the event more hosts are needed, this is an array
  ## extraHosts:
  ## - name: nginx.local
  ##   path: /
  ##
  extraHosts: []
  ## @param ingress.extraPaths Any additional arbitrary paths that may need to be added to the ingress under the main host.
  ## For example: The ALB ingress controller requires a special rule for handling SSL redirection.
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param ingress.extraTls The tls configuration for additional hostnames to be covered with this ingress record.
  ## see: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## extraTls:
  ## - hosts:
  ##     - nginx.local
  ##   secretName: nginx.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets If you're providing your own certificates, please use this to add the certificates as secrets
  ## key and certificate should start with -----BEGIN CERTIFICATE----- or
  ## -----BEGIN RSA PRIVATE KEY-----
  ##
  ## name should line up with a tlsSecret set further up
  ## If you're using cert-manager, this is unneeded, as it will create the secret for you if it is not set
  ##
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## e.g:
  ## - name: nginx.local-tls
  ##   key:
  ##   certificate:
  ##
  secrets: []
  ## @param ingress.extraRules The list of additional rules to be added to this ingress record. Evaluated as a template
  ## Useful when looking for additional customization, such as using different backend
  ##
  extraRules: []
## Health Ingress parameters
##
healthIngress:
  ## @param healthIngress.enabled Set to true to enable health ingress record generation
  ##
  enabled: false
  ## @param healthIngress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param healthIngress.pathType Ingress path type
  ##
  pathType: ImplementationSpecific
  ## @param healthIngress.hostname When the health ingress is enabled, a host pointing to this will be created
  ##
  hostname: example.local
  ## @param healthIngress.path Default path for the ingress record
  ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
  ##
  path: /
  ## @param healthIngress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
  ## For a full list of possible ingress annotations, please see
  ## ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/nginx-configuration/annotations.md
  ## Use this parameter to set the required annotations for cert-manager, see
  ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
  ##
  ## e.g:
  ## annotations:
  ##   kubernetes.io/ingress.class: nginx
  ##   cert-manager.io/cluster-issuer: cluster-issuer-name
  ##
  annotations: {}
  ## @param healthIngress.tls Enable TLS configuration for the hostname defined at `healthIngress.hostname` parameter
  ## TLS certificates will be retrieved from a TLS secret with name: {{- printf "%s-tls" .Values.healthIngress.hostname }}
  ## You can use the healthIngress.secrets parameter to create this TLS secret, relay on cert-manager to create it, or
  ## let the chart create self-signed certificates for you
  ##
  tls: false
  ## @param healthIngress.extraHosts An array with additional hostname(s) to be covered with the ingress record
  ## e.g:
  ## extraHosts:
  ##   - name: example.local
  ##     path: /
  ##
  extraHosts: []
  ## @param healthIngress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
  ## e.g:
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param healthIngress.extraTls TLS configuration for additional hostnames to be covered
  ## see: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## E.g.
  ## extraTls:
  ##   - hosts:
  ##       - example.local
  ##     secretName: example.local-tls
  ##
  extraTls: []
  ## @param healthIngress.secrets TLS Secret configuration
  ## If you're providing your own certificates, please use this to add the certificates as secrets
  ## key and certificate should start with -----BEGIN CERTIFICATE----- or -----BEGIN RSA PRIVATE KEY-----
  ## name should line up with a secretName set further up
  ## If it is not set and you're using cert-manager, this is unneeded, as it will create the secret for you
  ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ##
  ## E.g.
  ## secrets:
  ##   - name: example.local-tls
  ##     key:
  ##     certificate:
  ##
  secrets: []
  ## @param healthIngress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
  ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
  ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
  ##
  ingressClassName: ""
  ## @param healthIngress.extraRules The list of additional rules to be added to this ingress record. Evaluated as a template
  ## Useful when looking for additional customization, such as using different backend
  ##
  extraRules: []
## @section Metrics parameters

## Prometheus Exporter / Metrics
##
metrics:
  ## @param metrics.enabled Start a Prometheus exporter sidecar container
  ##
  enabled: false
  ## Bitnami NGINX Prometheus Exporter image
  ## ref: https://hub.docker.com/r/bitnami/nginx-exporter/tags/
  ## @param metrics.image.registry [default: REGISTRY_NAME] NGINX Prometheus exporter image registry
  ## @param metrics.image.repository [default: REPOSITORY_NAME/nginx-exporter] NGINX Prometheus exporter image repository
  ## @skip metrics.image.tag NGINX Prometheus exporter image tag (immutable tags are recommended)
  ## @param metrics.image.digest NGINX Prometheus exporter image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param metrics.image.pullPolicy NGINX Prometheus exporter image pull policy
  ## @param metrics.image.pullSecrets Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/nginx-exporter
    tag: 1.4.2-debian-12-r9
    digest: ""
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param metrics.port NGINX Container Status Port scraped by Prometheus Exporter
  ## Defaults to specified http port
  ##
  port: ""
  ## @param metrics.extraArgs Extra arguments for Prometheus exporter
  ## e.g:
  ## extraArgs:
  ##   - --nginx.timeout
  ##   - 5s
  ##
  extraArgs: []
  ## @param metrics.containerPorts.metrics Prometheus exporter container port
  ##
  containerPorts:
    metrics: 9113
  ## @param metrics.podAnnotations Additional annotations for NGINX Prometheus exporter pod(s)
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/
  ## @param metrics.securityContext.enabled Enabled NGINX Exporter containers' Security Context
  ## @param metrics.securityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param metrics.securityContext.runAsUser Set NGINX Exporter container's Security Context runAsUser
  ##
  securityContext:
    enabled: false
    seLinuxOptions: {}
    runAsUser: 1001
  ## Prometheus exporter service parameters
  ##
  service:
    ## @param metrics.service.port NGINX Prometheus exporter service port
    ##
    port: 9113
    ## @param metrics.service.annotations [object] Annotations for the Prometheus exporter service
    ##
    annotations:
      prometheus.io/scrape: "true"
      prometheus.io/port: "{{ .Values.metrics.service.port }}"
  ## NGINX Prometheus exporter resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param metrics.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.resources is set (metrics.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param metrics.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Prometheus Operator ServiceMonitor configuration
  ##
  serviceMonitor:
    ## @param metrics.serviceMonitor.enabled Creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
    ##
    enabled: false
    ## @param metrics.serviceMonitor.namespace Namespace in which Prometheus is running
    ##
    namespace: ""
    ## @param metrics.serviceMonitor.tlsConfig [object] TLS configuration used for scrape endpoints used by Prometheus
    ##
    tlsConfig: {}
    ## @param metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in prometheus.
    ##
    jobLabel: ""
    ## @param metrics.serviceMonitor.interval Interval at which metrics should be scraped.
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ## e.g:
    ## interval: 10s
    ##
    interval: ""
    ## @param metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ## e.g:
    ## scrapeTimeout: 10s
    ##
    scrapeTimeout: ""
    ## @param metrics.serviceMonitor.selector Prometheus instance selector labels
    ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
    ##
    ## selector:
    ##   prometheus: my-prometheus
    ##
    selector: {}
    ## @param metrics.serviceMonitor.labels Additional labels that can be used so PodMonitor will be discovered by Prometheus
    ##
    labels: {}
    ## @param metrics.serviceMonitor.relabelings RelabelConfigs to apply to samples before scraping
    ##
    relabelings: []
    ## @param metrics.serviceMonitor.metricRelabelings MetricRelabelConfigs to apply to samples before ingestion
    ##
    metricRelabelings: []
    ## @param metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
    ##
    honorLabels: false
  ## Prometheus Operator PrometheusRule configuration
  ##
  prometheusRule:
    ## @param metrics.prometheusRule.enabled if `true`, creates a Prometheus Operator PrometheusRule (also requires `metrics.enabled` to be `true` and `metrics.prometheusRule.rules`)
    ##
    enabled: false
    ## @param metrics.prometheusRule.namespace Namespace for the PrometheusRule Resource (defaults to the Release Namespace)
    ##
    namespace: ""
    ## @param metrics.prometheusRule.additionalLabels Additional labels that can be used so PrometheusRule will be discovered by Prometheus
    ##
    additionalLabels: {}
    ## @param metrics.prometheusRule.rules Prometheus Rule definitions
    ##   - alert: LowInstance
    ##     expr: up{service="{{ template "common.names.fullname" . }}"} < 1
    ##     for: 1m
    ##     labels:
    ##       severity: critical
    ##     annotations:
    ##       description: Service {{ template "common.names.fullname" . }} Tomcat is down since 1m.
    ##       summary: Tomcat instance is down.
    ##
    rules: []
  ## @param metrics.customLivenessProbe Override default metrics liveness probe
  ##
  customLivenessProbe: {}
  ## NGINX metrics containers' liveness probe.
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param metrics.livenessProbe.enabled Enable livenessProbe
  ## @param metrics.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param metrics.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param metrics.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param metrics.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param metrics.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 30
    timeoutSeconds: 5
    periodSeconds: 10
    failureThreshold: 2
    successThreshold: 1
  ## @param metrics.customReadinessProbe Override default metrics readiness probe
  ##
  customReadinessProbe: {}
  ## NGINX metrics containers' readiness probe.
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param metrics.readinessProbe.enabled Enable readinessProbe
  ## @param metrics.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param metrics.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param metrics.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param metrics.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param metrics.readinessProbe.successThreshold Success threshold for readinessProbe
  
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    timeoutSeconds: 3
    periodSeconds: 30
    failureThreshold: 2
    successThreshold: 1
  ## @param metrics.customStartupProbe Override default metrics startup probe
  ##
  customStartupProbe: {}
  ## NGINX metrics containers' startup probe.
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param metrics.startupProbe.enabled Enable startupProbe
  ## @param metrics.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param metrics.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param metrics.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param metrics.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param metrics.startupProbe.successThreshold Success threshold for startupProbe
  
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    timeoutSeconds: 3
    periodSeconds: 5
    failureThreshold: 10
    successThreshold: 1
