# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters

## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
##
kubeVersion: ""
## @param nameOverride String to partially override metallb.fullname include (will maintain the release name)
##
nameOverride: ""
## @param fullnameOverride String to fully override metallb.fullname template
##
fullnameOverride: ""
## @param commonLabels Add labels to all the deployed resources
##
commonLabels: {}
## @param commonAnnotations Add annotations to all the deployed resources
##
commonAnnotations: {}
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []
## Enable diagnostic mode in the deployment(s)/statefulset(s)
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the the deployment(s)/statefulset(s)
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the the deployment(s)/statefulset(s)
  ##
  args:
    - infinity
## @param installCRDs Flag to install metallb CRDs
##
installCRDs: true
## @section MetalLB parameters

## RBAC creation for controller and speaker
##
rbac:
  ## @param rbac.create Specifies whether to install and use RBAC rules
  ##
  create: true
## PSP creation for controller and speaker
##
psp:
  ## @param psp.create Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later
  ##
  create: false
## Network Policy configuration
## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Enable creation of NetworkPolicy resources
  ##
  enabled: true
  ## @param networkPolicy.allowExternal The Policy model to apply
  ## When set to false, only pods with the correct client label will have network access to the ports MetalLB is
  ## listening on. When true, MetalLB will accept connections from any source (with the correct destination port).
  ##
  allowExternal: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.kubeAPIServerPorts [array] List of possible endpoints to kube-apiserver (limit to your cluster settings to increase security)
  ##
  kubeAPIServerPorts: [443, 6443, 8443]
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}
## Prometheus Operator alertmanager alerts
##
## @param prometheusRule.enabled Prometheus Operator alertmanager alerts are created
##
prometheusRule:
  enabled: false
## @section Controller parameters

## MetalLB Controller deployment.
## ref: https://hub.docker.com/r/bitnami/metallb-controller/tags
##
controller:
  ## @param controller.image.registry [default: REGISTRY_NAME] MetalLB Controller image registry
  ## @param controller.image.repository [default: REPOSITORY_NAME/metallb-controller] MetalLB Controller image repository
  ## @skip controller.image.tag MetalLB Controller  image tag (immutable tags are recommended)
  ## @param controller.image.digest MetalLB Controller image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param controller.image.pullPolicy MetalLB Controller image pull policy
  ## @param controller.image.pullSecrets Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/metallb-controller
    tag: 0.15.2-debian-12-r7
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param controller.updateStrategy.type MetalLB controller deployment strategy type.
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
  ## e.g:
  ## updateStrategy:
  ##  type: RollingUpdate
  ##  rollingUpdate:
  ##    maxSurge: 25%
  ##    maxUnavailable: 25%
  ##
  updateStrategy:
    type: RollingUpdate
  ## @param controller.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: true
  ## @param controller.hostAliases Deployment pod host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## If global .Values.rbac.create is disabled no rbac is created.
  ## This value is then meaningless
  ## Defines if the controller rbac should be created.
  ##
  rbac:
    ## @param controller.rbac.create create specifies whether to install and use RBAC rules.
    ##
    create: true
  ## If global .Values.psp.create is disabled no psp is created.
  ## This value is then meaningless
  ## Defines if the controller psp should be created.
  ##
  psp:
    ## @param controller.psp.create Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later
    ##
    create: true
  ## @param controller.priorityClassName MetalLB controller pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param controller.runtimeClassName Name of the runtime class to be used by MetalLB controller pod(s)
  ## ref: https://kubernetes.io/docs/concepts/containers/runtime-class/
  ##
  runtimeClassName: ""
  ## @param controller.schedulerName Name of the k8s scheduler (other than default)
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param controller.terminationGracePeriodSeconds In seconds, time the given to the MetalLB controller pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: 0
  ## @param controller.topologySpreadConstraints Topology Spread Constraints for pod assignment
  ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  ## The value is evaluated as a template
  ##
  topologySpreadConstraints: []
  ## Controller container resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param controller.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if controller.resources is set (controller.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param controller.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param controller.nodeSelector Node labels for controller pod assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param controller.tolerations Tolerations for controller pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param controller.affinity Affinity for controller pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ##
  affinity: {}
  ## @param controller.podAnnotations Controller Pod annotations
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param controller.podLabels Controller Pod labels
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param controller.podAffinityPreset Controller Pod affinitypreset. Allowed values: soft, hard
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param controller.podAntiAffinityPreset Controller Pod anti affinitypreset. Allowed values: soft, hard
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ## Allowed values: soft, hard
  ##
  nodeAffinityPreset:
    ## @param controller.nodeAffinityPreset.type Controller Pod Node affinity preset. Allowed values: soft, hard
    ##
    type: ""
    ## @param controller.nodeAffinityPreset.key Controller Pod Node affinity label key to match
    ## E.g.
    ## key: "kubernetes.io/e2e-az-name"
    ##
    key: ""
    ## @param controller.nodeAffinityPreset.values Controller Pod Node affinity label values to match
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param controller.podSecurityContext.enabled Enabled MetalLB Controller pods' Security Context
  ## @param controller.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param controller.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param controller.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param controller.podSecurityContext.fsGroup Set MetalLB Controller pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param controller.containerSecurityContext.enabled Enabled MetalLB Controller containers' Security Context
  ## @param controller.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param controller.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param controller.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param controller.containerSecurityContext.runAsNonRoot Set MetalLB Controller container's Security Context runAsNonRoot
  ## @param controller.containerSecurityContext.allowPrivilegeEscalation Enables privilege Escalation context for the pod.
  ## @param controller.containerSecurityContext.readOnlyRootFilesystem Allows the pod to mount the RootFS as ReadOnly
  ## @param controller.containerSecurityContext.capabilities.drop [array] Drop capabilities for the securityContext
  ## @param controller.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    allowPrivilegeEscalation: false
    readOnlyRootFilesystem: true
    capabilities:
      drop:
        - ALL
    seccompProfile:
      type: "RuntimeDefault"
  ## @param controller.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param controller.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param controller.lifecycleHooks for the MetalLB Controller container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param controller.extraEnvVars Extra environment variable to pass to the running container.
  ## For example:
  ## extraEnvVars:
  ##  - name: MY_ENV_VAR
  ##    value: env_var_value
  ##
  extraEnvVars: []
  ## @param controller.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for MetalLB controller nodes
  ##
  extraEnvVarsCM: ""
  ## @param controller.extraEnvVarsSecret Name of existing Secret containing extra env vars for MetalLB controller nodes
  ##
  extraEnvVarsSecret: ""
  ## @param controller.extraVolumes Optionally specify extra list of additional volumes for the MetalLB controller pod(s)
  ##
  extraVolumes: []
  ## @param controller.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the MetalLB controller container(s)
  ##
  extraVolumeMounts: []
  ## @param controller.sidecars Add additional sidecar containers to the MetalLB Controller pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param controller.initContainers Add additional init containers to the MetalLB Controller pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param controller.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param controller.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param controller.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `controller.pdb.minAvailable` and `controller.pdb.maxUnavailable` are empty.
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## Pods Service Account
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
  ## @param controller.serviceAccount.create Specifies whether a ServiceAccount should be created
  ## @param controller.serviceAccount.name Name of the service account to use. If not set and create is true, a name is generated using the fullname template.
  ## @param controller.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
  ## @param controller.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
  ##
  serviceAccount:
    create: true
    name: ""
    automountServiceAccountToken: false
    annotations: {}
  ## @param controller.revisionHistoryLimit Configure the revisionHistoryLimit of the Controller deployment
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#revision-history-limit
  ##
  revisionHistoryLimit: 3
  ## @param controller.containerPorts.metrics Configures the ports the MetalLB Controller listens on for metrics
  ##
  containerPorts:
    metrics: 7472
  ## Liveness probe values
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param controller.livenessProbe.enabled Enable livenessProbe
  ## @param controller.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param controller.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param controller.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param controller.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param controller.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## Readiness probe values
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param controller.readinessProbe.enabled Enable readinessProbe
  ## @param controller.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param controller.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param controller.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param controller.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param controller.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## Startup probe values
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param controller.startupProbe.enabled Enable startupProbe
  ## @param controller.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param controller.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param controller.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param controller.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param controller.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## @param controller.customStartupProbe Custom liveness probe for the Web component
  ##
  customStartupProbe: {}
  ## @param controller.customLivenessProbe Custom liveness probe for the Web component
  ##
  customLivenessProbe: {}
  ## @param controller.customReadinessProbe Custom readiness probe for the Web component
  ##
  customReadinessProbe: {}
  ## @param controller.logLevel Sets the controller log level. Does not work if the args are overridden
  ##
  logLevel: info
  ## @param controller.tlsMinVersion Sets the minimum TLS version for the controller
  ## e.g:
  ## namespace: VersionTLS12
  ##
  tlsMinVersion: ""
  ## @param controller.tlsCipherSuites Comma separated list of TLS cipher suites for the controller
  ##  
  tlsCipherSuites: ""
  ## @param controller.webhookMode Controller webhook mode
  ## Allowed values: enabled, disabled or only webhook if we want the controller to act as webhook endpoint only
  ##
  webhookMode: enabled
  ## @param controller.extraArgs Add extra arguments to the default arguments for the controller
  ##
  extraArgs: []
  ## @section MetalLB controller Prometheus metrics export
  ##
  metrics:
    ## @param controller.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## Prometheus Exporter service parameters
    ##
    service:
      ## @param controller.metrics.service.port Prometheus metrics service port
      ##
      port: 7472
      ## @param controller.metrics.service.annotations [object] Annotations for the Prometheus Exporter service service
      ##
      annotations:
        prometheus.io/scrape: "true"
        prometheus.io/port: "7472"
        prometheus.io/path: "/metrics" ## Prometheus Operator service monitors
    ##
    serviceMonitor:
      ## @param controller.metrics.serviceMonitor.enabled Specify if a servicemonitor will be deployed for prometheus-operator
      ##
      enabled: false
      ## @param controller.metrics.serviceMonitor.namespace Namespace which Prometheus is running in
      ## e.g:
      ## namespace: monitoring
      ##
      namespace: ""
      ## @param controller.metrics.serviceMonitor.jobLabel Specify the jobLabel to use for the prometheus-operator
      ##
      jobLabel: "app.kubernetes.io/name"
      ## @param controller.metrics.serviceMonitor.interval Scrape interval. If not set, the Prometheus default scrape interval is used
      ##
      interval: ""
      ## @param controller.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ##
      scrapeTimeout: ""
      ## @param controller.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param controller.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param controller.metrics.serviceMonitor.selector ServiceMonitor selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ##
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}
      ## @param controller.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param controller.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
## @section Speaker parameters

## MetalLB Speaker daemonset.
## ref: https://hub.docker.com/r/bitnami/metallb-speaker/tags
##
speaker:
  ## @param speaker.enabled Whether to enable BGP speakers or not
  ## ref: https://metallb.universe.tf/configuration/calico/#the-easy-way
  ## Some CNI implementations (e.g. Calico) does not require speakers
  ##
  enabled: true
  ## @param speaker.image.registry [default: REGISTRY_NAME] MetalLB Speaker image registry
  ## @param speaker.image.repository [default: REPOSITORY_NAME/metallb-speaker] MetalLB Speaker image repository
  ## @skip speaker.image.tag MetalLB Speaker  image tag (immutable tags are recommended)
  ## @param speaker.image.digest MetalLB Speaker image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param speaker.image.pullPolicy MetalLB Speaker image pull policy
  ## @param speaker.image.pullSecrets Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/metallb-speaker
    tag: 0.15.2-debian-12-r6
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## @param speaker.updateStrategy.type Speaker daemonset strategy type
  ## ref: https://kubernetes.io/docs/tasks/manage-daemon/update-daemon-set/
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## If global .Values.rbac.create is disabled no rbac is created.
  ## This value is then meaningless
  ## Defines if the speaker rbac should be created.
  ##
  rbac:
    ## @param speaker.rbac.create create specifies whether to install and use RBAC rules.
    ##
    create: true
  ## @param speaker.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: true
  ## Network Policy configuration
  ## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param speaker.networkPolicy.enabled Enable creation of NetworkPolicy resources
    ##
    enabled: true
    ## @param speaker.networkPolicy.allowExternal The Policy model to apply
    ## When set to false, only pods with the correct client label will have network access to the ports MetalLB is
    ## listening on. When true, MetalLB will accept connections from any source (with the correct destination port).
    ##
    allowExternal: true
    ## @param speaker.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param speaker.networkPolicy.kubeAPIServerPorts [array] List of possible endpoints to kube-apiserver (limit to your cluster settings to increase security)
    ##
    kubeAPIServerPorts: [443, 6443, 8443]
    ## @param speaker.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraIngress: []
    ## @param speaker.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param speaker.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param speaker.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## @param speaker.hostAliases Deployment pod host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## If global .Values.psp.create is disabled no psp is created.
  ## This value is then meaningless
  ## Defines if the speaker psp should be created.
  ##
  psp:
    ## @param speaker.psp.create Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later
    ##
    create: true
  ## @param speaker.priorityClassName Speaker pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param speaker.runtimeClassName Name of the runtime class to be used by Speaker pod(s)
  ## ref: https://kubernetes.io/docs/concepts/containers/runtime-class/
  ##
  runtimeClassName: ""
  ## @param speaker.terminationGracePeriodSeconds In seconds, time the given to the Speaker pod needs to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: 2
  ## Speaker container resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param speaker.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if speaker.resources is set (speaker.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param speaker.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param speaker.nodeSelector Node labels for speaker pod assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param speaker.tolerations Tolerations for speaker pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param speaker.affinity Affinity for speaker pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ##
  affinity: {}
  ## Node speaker.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param speaker.nodeAffinityPreset.type Node affinity preset type. Ignored if `speaker.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param speaker.nodeAffinityPreset.key Node label key to match. Ignored if `speaker.affinity` is set
    ##
    key: ""
    ## @param speaker.nodeAffinityPreset.values Node label values to match. Ignored if `speaker.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param speaker.podAffinityPreset Pod affinity preset. Ignored if `speaker.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param speaker.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `speaker.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## @param speaker.podAnnotations Speaker Pod annotations
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param speaker.podLabels Speaker Pod labels
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param speaker.podSecurityContext.enabled Enabled Speaker pods' Security Context
  ## @param speaker.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param speaker.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param speaker.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param speaker.podSecurityContext.fsGroup Set Speaker pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 0
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param speaker.containerSecurityContext.enabled Enabled Speaker containers' Security Context
  ## @param speaker.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param speaker.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param speaker.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param speaker.containerSecurityContext.allowPrivilegeEscalation Enables privilege Escalation context for the pod.
  ## @param speaker.containerSecurityContext.readOnlyRootFilesystem Allows the pod to mount the RootFS as ReadOnly
  ## @param speaker.containerSecurityContext.capabilities.drop [array] Drop capabilities for the securityContext. You need to comment out this block if you would like to use `tcpdump` for debugging purposes.
  ## @param speaker.containerSecurityContext.capabilities.add [array] Add capabilities for the securityContext
  ## @param speaker.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 0
    runAsGroup: 0
    allowPrivilegeEscalation: false
    readOnlyRootFilesystem: true
    capabilities:
      # In order to use `tcpdump` you would need to comment out the `drop` block
      drop:
        - ALL
      add:
        - NET_ADMIN
        - NET_RAW
        - SYS_ADMIN
    seccompProfile:
      type: "RuntimeDefault"
  ## @param speaker.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param speaker.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param speaker.lifecycleHooks for the Speaker container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param speaker.sidecars Add additional sidecar containers to the Speaker pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param speaker.initContainers Add additional init containers to the Speaker pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## Pods Service Account
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
  ## @param speaker.serviceAccount.create Specifies whether a ServiceAccount should be created
  ## @param speaker.serviceAccount.name Name of the service account to use. If not set and create is true, a name is generated using the fullname template.
  ## @param speaker.serviceAccount.automountServiceAccountToken Automount service account token for the server service account
  ## @param speaker.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
  ##
  serviceAccount:
    create: true
    name: ""
    automountServiceAccountToken: false
    annotations: {}
  ## Defines a secret to use outside of the auto generate
  ## @param speaker.secretName References a Secret name for the member secret outside of the helm chart
  ## @param speaker.secretKey References a Secret key the member secret outside of the helm chart
  ## @param speaker.secretValue Custom value for `speaker.secretKey`
  ## Default: {{ randAlphaNum 256 | b64enc | quote }}
  ## The auto generated secret has:
  ## secretName: {{ "common.names.fullname" }}-memberlist
  ## secretKey: secretkey
  ## secretValue: random 256 character alphanumeric string
  ##
  secretName: ""
  secretKey: ""
  secretValue: ""
  ## @param speaker.extraEnvVars Extra environment variable to pass to the running container.
  ## For example:
  ## extraEnvVars:
  ##  - name: MY_ENV_VAR
  ##    value: env_var_value
  ##
  extraEnvVars: []
  ## @param speaker.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for Speaker nodes
  ##
  extraEnvVarsCM: ""
  ## @param speaker.extraEnvVarsSecret Name of existing Secret containing extra env vars for Speaker nodes
  ##
  extraEnvVarsSecret: ""
  ## @param speaker.extraVolumes Optionally specify extra list of additional volumes for the Speaker pod(s)
  ##
  extraVolumes: []
  ## @param speaker.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the Speaker container(s)
  ##
  extraVolumeMounts: []
  ## @param speaker.containerPorts.metrics HTTP Metrics Endpoint
  ##
  containerPorts:
    metrics: 7472
  ## Liveness probe values
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param speaker.livenessProbe.enabled Enable livenessProbe
  ## @param speaker.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param speaker.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param speaker.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param speaker.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param speaker.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## Readiness probe values
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param speaker.readinessProbe.enabled Enable readinessProbe
  ## @param speaker.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param speaker.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param speaker.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param speaker.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param speaker.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## Startup probe values
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
  ## @param speaker.startupProbe.enabled Enable startupProbe
  ## @param speaker.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param speaker.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param speaker.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param speaker.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param speaker.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## @param speaker.customStartupProbe Custom liveness probe for the Web component
  ##
  customStartupProbe: {}
  ## @param speaker.customLivenessProbe Custom liveness probe for the Web component
  ##
  customLivenessProbe: {}
  ## @param speaker.customReadinessProbe Custom readiness probe for the Web component
  ##
  customReadinessProbe: {}
  ## @param speaker.logLevel Sets the speaker log level. Does not work if the args are overridden
  ##
  logLevel: "info"
  ## @section FRR Speaker
  frr:
    ## @param speaker.frr.enabled Whether to enable FRR mode
    ## ref: https://metallb.universe.tf/concepts/bgp/#frr-mode
    ##
    enabled: false
    image:
      ## @param speaker.frr.image.registry [default: REGISTRY_NAME] MetalLB Speaker image registry
      ## @param speaker.frr.image.repository [default: REPOSITORY_NAME/metallb-speaker] MetalLB Speaker image repository
      ## @skip speaker.frr.image.tag MetalLB Speaker  image tag (immutable tags are recommended)
      ## @param speaker.frr.image.digest MetalLB Speaker image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
      ## @param speaker.frr.image.pullPolicy MetalLB Speaker image pull policy
      ## @param speaker.frr.image.pullSecrets Specify docker-registry secret names as an array
      ##
      registry: docker.io
      repository: bitnami/metallb-speaker
      tag: 0.15.2-debian-12-r6
      digest: ""
      pullPolicy: IfNotPresent
      pullSecrets: []
    ## Speaker container resource requests and limits
    ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
    ## We usually recommend not to specify default resources and to leave this as a conscious
    ## choice for the user. This also increases chances charts run on environments with little
    ## resources, such as Minikube. If you do want to specify resources, uncomment the following
    ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    ## @param speaker.frr.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if speaker.resources is set (speaker.resources is recommended for production).
    ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
    ##
    resourcesPreset: "micro"
    ## @param speaker.frr.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
    ## Example:
    ## resources:
    ##   requests:
    ##     cpu: 2
    ##     memory: 512Mi
    ##   limits:
    ##     cpu: 3
    ##     memory: 1024Mi
    ##
    resources: {}
    ## Configure Container Security Context
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
    ## @param speaker.frr.containerSecurityContext.enabled Enabled Speaker containers' Security Context
    ## @param speaker.frr.containerSecurityContext.capabilities.add [array] Add capabilities for the securityContext
    ## @param speaker.frr.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
    ## @param speaker.frr.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
    containerSecurityContext:
      enabled: true
      runAsUser: 0
      runAsGroup: 0
      capabilities:
        add:
          - NET_ADMIN
          - NET_RAW
          - SYS_ADMIN
          - NET_BIND_SERVICE
    ## @param speaker.frr.containerPorts.metrics HTTP Metrics Endpoint
    ##
    containerPorts:
      metrics: 7473
    ## @section FRR Speaker Prometheus metrics export
    metrics:
      ## Prometheus Exporter service parameters
      ##
      service:
        ## @param speaker.frr.metrics.service.port Prometheus metrics service port
        ##
        port: 7473
        ## @param speaker.frr.metrics.service.annotations [object] Annotations for the Prometheus Exporter service service
        ##
        annotations:
          prometheus.io/scrape: "true"
          prometheus.io/port: "7473"
          prometheus.io/path: "/metrics"
      ## Prometheus Operator service monitors
      ##
      serviceMonitor:
        ## @param speaker.frr.metrics.serviceMonitor.enabled Enable support for Prometheus Operator
        ##
        enabled: false
        ## @param speaker.frr.metrics.serviceMonitor.namespace Namespace which Prometheus is running in
        ## e.g:
        ## namespace: monitoring
        ##
        namespace: ""
        ## @param speaker.frr.metrics.serviceMonitor.jobLabel Job label for scrape target
        ##
        jobLabel: "app.kubernetes.io/name"
        ## @param speaker.frr.metrics.serviceMonitor.interval Scrape interval. If not set, the Prometheus default scrape interval is used
        ##
        interval: ""
        ## @param speaker.frr.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
        ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
        ##
        scrapeTimeout: ""
        ## @param speaker.frr.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
        ##
        metricRelabelings: []
        ## @param speaker.frr.metrics.serviceMonitor.relabelings Specify general relabeling
        ##
        relabelings: []
        ## @param speaker.frr.metrics.serviceMonitor.selector ServiceMonitor selector labels
        ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
        ##
        ## selector:
        ##   prometheus: my-prometheus
        ##
        selector: {}
        ## @param speaker.frr.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
        ##
        labels: {}
        ## @param speaker.frr.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
        ##
        honorLabels: false

    ## Liveness probe values
    ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
    ## @param speaker.frr.livenessProbe.enabled Enable livenessProbe
    ## @param speaker.frr.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
    ## @param speaker.frr.livenessProbe.periodSeconds Period seconds for livenessProbe
    ## @param speaker.frr.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
    ## @param speaker.frr.livenessProbe.failureThreshold Failure threshold for livenessProbe
    ## @param speaker.frr.livenessProbe.successThreshold Success threshold for livenessProbe
    ##
    livenessProbe:
      enabled: true
      failureThreshold: 3
      initialDelaySeconds: 10
      periodSeconds: 10
      successThreshold: 1
      timeoutSeconds: 1
    ## Readiness probe values
    ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
    ## @param speaker.frr.readinessProbe.enabled Enable readinessProbe
    ## @param speaker.frr.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
    ## @param speaker.frr.readinessProbe.periodSeconds Period seconds for readinessProbe
    ## @param speaker.frr.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
    ## @param speaker.frr.readinessProbe.failureThreshold Failure threshold for readinessProbe
    ## @param speaker.frr.readinessProbe.successThreshold Success threshold for readinessProbe
    ##
    readinessProbe:
      enabled: true
      failureThreshold: 3
      initialDelaySeconds: 10
      periodSeconds: 10
      successThreshold: 1
      timeoutSeconds: 1
    ## Startup probe values
    ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
    ## @param speaker.frr.startupProbe.enabled Enable startupProbe
    ## @param speaker.frr.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
    ## @param speaker.frr.startupProbe.periodSeconds Period seconds for startupProbe
    ## @param speaker.frr.startupProbe.timeoutSeconds Timeout seconds for startupProbe
    ## @param speaker.frr.startupProbe.failureThreshold Failure threshold for startupProbe
    ## @param speaker.frr.startupProbe.successThreshold Success threshold for startupProbe
    ##
    startupProbe:
      enabled: true
      failureThreshold: 3
      initialDelaySeconds: 10
      periodSeconds: 10
      successThreshold: 1
      timeoutSeconds: 1
    ## @param speaker.frr.customStartupProbe Custom liveness probe for the Web component
    ##
    customStartupProbe: {}
    ## @param speaker.frr.customLivenessProbe Custom liveness probe for the Web component
    ##
    customLivenessProbe: {}
    ## @param speaker.frr.customReadinessProbe Custom readiness probe for the Web component
    ##
    customReadinessProbe: {}
  ## @section Speaker Prometheus metrics export
  metrics:
    ## @param speaker.metrics.enabled Enable the export of Prometheus metrics
    ##
    enabled: false
    ## Prometheus Exporter service parameters
    ##
    service:
      ## @param speaker.metrics.service.port Prometheus metrics service port
      ##
      port: 7472
      ## @param speaker.metrics.service.annotations [object] Annotations for the Prometheus Exporter service service
      ##
      annotations:
        prometheus.io/scrape: "true"
        prometheus.io/port: "7472"
        prometheus.io/path: "/metrics"
    ## Prometheus Operator service monitors
    ##
    serviceMonitor:
      ## @param speaker.metrics.serviceMonitor.enabled Enable support for Prometheus Operator
      ##
      enabled: false
      ## @param speaker.metrics.serviceMonitor.namespace Namespace which Prometheus is running in
      ## e.g:
      ## namespace: monitoring
      ##
      namespace: ""
      ## @param speaker.metrics.serviceMonitor.jobLabel Job label for scrape target
      ##
      jobLabel: "app.kubernetes.io/name"
      ## @param speaker.metrics.serviceMonitor.interval Scrape interval. If not set, the Prometheus default scrape interval is used
      ##
      interval: ""
      ## @param speaker.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ##
      scrapeTimeout: ""
      ## @param speaker.metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
      ##
      metricRelabelings: []
      ## @param speaker.metrics.serviceMonitor.relabelings Specify general relabeling
      ##
      relabelings: []
      ## @param speaker.metrics.serviceMonitor.selector ServiceMonitor selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ##
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}
      ## @param speaker.metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
      ##
      labels: {}
      ## @param speaker.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
