# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
## @param global.storageClass DEPRECATED: use global.defaultStorageClass instead
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  storageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto

## @section Common parameters
##

## @param kubeVersion Override Kubernetes version
##
kubeVersion: ""
## @param apiVersions Override Kubernetes API versions reported by .Capabilities
##
apiVersions: []
## @param nameOverride String to partially override common.names.name
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""
## @param commonLabels Labels to add to all deployed objects
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}
## @param clusterDomain Kubernetes cluster domain name
##
clusterDomain: cluster.local
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []

## Enable diagnostic mode in the deployment
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the deployment
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the deployment
  ##
  args:
    - infinity

## Settings for the the storage backend
##
storageBackend:
  ## @param storageBackend.usePasswordFiles Mount credentials as a files instead of using an environment variable
  ## Note: ignored when backend does not require authentication
  ##
  usePasswordFiles: true
  ## Cassandra storage backend
  ##
  cassandra:
    ## @param storageBackend.cassandra.enabled Use Apache Casandra subchart as storage backend
    ##
    enabled: true
  ## BerkeleyDB storage backend
  ##
  berkeleyje:
    ## @param storageBackend.berkeleyje.enabled Use BerkeleyDB (local) as storage backend
    ##
    enabled: false
    ## @param storageBackend.berkeleyje.directory Path for the BerkeleyDB data
    ##
    directory: "/bitnami/janusgraph/data/storage"
  ## External storage backend
  ##
  external:
    ## @param storageBackend.external.backend Type of the external storage backend to be used
    ##
    backend: ""
    ## @param storageBackend.external.hostname Hostname of the external storage backend
    ##
    hostname: ""
    ## @param storageBackend.external.port Port of the external storage backend
    ##
    port: ""
    ## @param storageBackend.external.username Username used to authenticate to the storage backend, in case it requires authentication
    ##
    username: ""
    ## @param storageBackend.external.existingSecret Existing secret containing the password of the external storage backend, in case its needed
    ##
    existingSecret: ""
    ## @param storageBackend.external.existingSecretPasswordKey Name of an existing secret key containing the storage backend password
    ##
    existingSecretPasswordKey: ""

## Settings for index management
##
indexBackend:
  ## Lucene index backend
  ##
  lucene:
    ## @param indexBackend.lucene.enabled Use Lucene (local) as index management backend
    ##
    enabled: false
    ## @param indexBackend.lucene.directory Path for the BerkeleyDB data
    ##
    directory: "/bitnami/janusgraph/data/index"
  ## External index backend
  ##
  external:
    ## @param indexBackend.external.backend Type of the external index backend to be used
    ##
    backend: ""
    ## @param indexBackend.external.hostname Hostname of the external index backend
    ##
    hostname: ""
    ## @param indexBackend.external.port Port of the external index backend
    ##
    port: ""

## Settings for JanusGraph caching.
##
cache:
  ## @param cache.enabled Enable Janusgraph cache feature
  ## Ref. https://docs.janusgraph.org/operations/cache/
  ##
  enabled: true

## @param existingConfigmap The name of an existing ConfigMap with your custom configuration for JanusGraph
## NOTE: By providing a ConfigMap, other settings provided using values may be ignored.
##
existingConfigmap: ""
## @param extraJanusgraphProperties Additional JanusGraph to be appended at the end of the janusgraph.properties configmap
##
extraJanusgraphProperties: ""
## @param janusgraphProperties Override the content of the janusgraph.properties file.
## NOTE: By providing the content of janusgraph.properties, other settings provided using values may be ignored.
##
janusgraphProperties: ""
## @param javaOptions Java options for JanusGraph execution
##
javaOptions: ""

## Bitnami JanusGraph image
## ref: https://hub.docker.com/r/bitnami/janusgraph/tags/
## @param image.registry [default: REGISTRY_NAME] JanusGraph image registry
## @param image.repository [default: REPOSITORY_NAME/janusgraph] JanusGraph image repository
## @skip image.tag JanusGraph image tag (immutable tags are recommended)
## @param image.digest JanusGraph image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
## @param image.pullPolicy JanusGraph image pull policy
## @param image.pullSecrets JanusGraph image pull secrets
## @param image.debug Enable JanusGraph image debug mode
##
image:
  registry: docker.io
  repository: bitnami/janusgraph
  tag: 1.1.0-debian-12-r21
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: http://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
  ## Enable debug mode
  ##
  debug: false

## @param replicaCount Number of JanusGraph replicas to deploy
##
replicaCount: 1
## @param containerPorts.gremlin JanusGraph gremlin server container port
## @param containerPorts.jmx JanusGraph JMX metrics container port
##
containerPorts:
  gremlin: 8182
  jmx: 5555
## Configure extra options for JanusGraph containers' liveness and readiness probes
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param livenessProbe.enabled Enable livenessProbe on JanusGraph containers
## @param livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
## @param livenessProbe.periodSeconds Period seconds for livenessProbe
## @param livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
## @param livenessProbe.failureThreshold Failure threshold for livenessProbe
## @param livenessProbe.successThreshold Success threshold for livenessProbe
##
livenessProbe:
  enabled: true
  initialDelaySeconds: 90
  periodSeconds: 10
  timeoutSeconds: 5
  successThreshold: 1
  failureThreshold: 5
## @param readinessProbe.enabled Enable readinessProbe on JanusGraph containers
## @param readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
## @param readinessProbe.periodSeconds Period seconds for readinessProbe
## @param readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
## @param readinessProbe.failureThreshold Failure threshold for readinessProbe
## @param readinessProbe.successThreshold Success threshold for readinessProbe
##
readinessProbe:
  enabled: true
  initialDelaySeconds: 90
  periodSeconds: 10
  timeoutSeconds: 5
  successThreshold: 1
  failureThreshold: 5
## @param startupProbe.enabled Enable startupProbe on JanusGraph containers
## @param startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
## @param startupProbe.periodSeconds Period seconds for startupProbe
## @param startupProbe.timeoutSeconds Timeout seconds for startupProbe
## @param startupProbe.failureThreshold Failure threshold for startupProbe
## @param startupProbe.successThreshold Success threshold for startupProbe
##
startupProbe:
  enabled: false
  initialDelaySeconds: 90
  periodSeconds: 10
  timeoutSeconds: 5
  successThreshold: 1
  failureThreshold: 5
## @param customLivenessProbe Custom livenessProbe that overrides the default one
##
customLivenessProbe: {}
## @param customReadinessProbe Custom readinessProbe that overrides the default one
##
customReadinessProbe: {}
## @param customStartupProbe Custom startupProbe that overrides the default one
##
customStartupProbe: {}
## JanusGraph resource requests and limits
## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
## We usually recommend not to specify default resources and to leave this as a conscious
## choice for the user. This also increases chances charts run on environments with little
## resources, such as Minikube. If you do want to specify resources, uncomment the following
## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
## @param resourcesPreset Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (secondary.resources is recommended for production).
## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
##
resourcesPreset: "xlarge"
## @param resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
## Example:
## resources:
##   requests:
##     cpu: 2
##     memory: 512Mi
##   limits:
##     cpu: 3
##     memory: 1024Mi
##
resources: {}
## Configure Pods Security Context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
## @param podSecurityContext.enabled Enable security context for JanusGraph pods
## @param podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
## @param podSecurityContext.sysctls Set kernel settings using the sysctl interface
## @param podSecurityContext.supplementalGroups Set filesystem extra groups
## @param podSecurityContext.fsGroup Group ID for the mounted volumes' filesystem
##
podSecurityContext:
  enabled: true
  fsGroupChangePolicy: Always
  sysctls: []
  supplementalGroups: []
  fsGroup: 1001
## Configure Container Security Context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## @param containerSecurityContext.enabled JanusGraph container securityContext
## @param containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
## @param containerSecurityContext.runAsUser User ID for the JanusGraph container
## @param containerSecurityContext.runAsGroup Group ID for the JanusGraph container
## @param containerSecurityContext.runAsNonRoot Set secondary container's Security Context runAsNonRoot
## @param containerSecurityContext.privileged Set secondary container's Security Context privileged
## @param containerSecurityContext.allowPrivilegeEscalation Set secondary container's Security Context allowPrivilegeEscalation
## @param containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
## @param containerSecurityContext.capabilities.drop List of capabilities to be dropped
## @param containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
##
containerSecurityContext:
  enabled: true
  seLinuxOptions: {}
  runAsUser: 1001
  runAsGroup: 1001
  runAsNonRoot: true
  privileged: false
  allowPrivilegeEscalation: false
  readOnlyRootFilesystem: true
  capabilities:
    drop: ["ALL"]
  seccompProfile:
    type: "RuntimeDefault"

## @param command Override default container command (useful when using custom images)
##
command: []
## @param args Override default container args (useful when using custom images)
##
args: []
## @param hostAliases JanusGraph pods host aliases
## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
##
hostAliases: []
## @param annotations Annotations for JanusGraph deployment/statefulset
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
annotations: {}
## @param podLabels Extra labels for JanusGraph pods
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
##
podLabels: {}
## @param podAnnotations Annotations for JanusGraph pods
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}
## @param podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAffinityPreset: ""
## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAntiAffinityPreset: soft
## Pod Disruption Budget configuration
## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
## @param pdb.create Enable/disable a Pod Disruption Budget creation
## @param pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
## @param pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable
##
pdb:
  create: true
  minAvailable: ""
  maxUnavailable: ""
## Node affinity preset
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
##
nodeAffinityPreset:
  ## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ##
  type: ""
  ## @param nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
  ##
  key: ""
  ## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
  ## E.g.
  ## values:
  ##   - e2e-az1
  ##   - e2e-az2
  ##
  values: []
## @param affinity Affinity for JanusGraph pods assignment
## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
## NOTE: `podAffinityPreset`, `podAntiAffinityPreset`, and `nodeAffinityPreset` will be ignored when it's set
##
affinity: {}
## @param automountServiceAccountToken Mount Service Account token in pod
##
automountServiceAccountToken: false
## @param nodeSelector Node labels for JanusGraph pods assignment
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
##
nodeSelector: {}
## @param tolerations Tolerations for JanusGraph pods assignment
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
## @param updateStrategy.type JanusGraph strategy type
## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
##
updateStrategy:
  ## StrategyType
  ## Can be set to RollingUpdate or Recreate
  ##
  type: RollingUpdate

## @param priorityClassName JanusGraph pods' priorityClassName
##
priorityClassName: ""
## @param topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template
## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
##
topologySpreadConstraints: []
## @param schedulerName Name of the k8s scheduler (other than default) for JanusGraph pods
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""
## @param terminationGracePeriodSeconds Seconds Redmine pod needs to terminate gracefully
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
##
terminationGracePeriodSeconds: ""
## @param lifecycleHooks for the JanusGraph container(s) to automate configuration before or after startup
##
lifecycleHooks: {}
## @param extraEnvVars Array with extra environment variables to add to JanusGraph nodes
## e.g:
## extraEnvVars:
##   - name: FOO
##     value: "bar"
##
extraEnvVars: []
## @param extraEnvVarsCM Name of existing ConfigMap containing extra env vars for JanusGraph nodes
##
extraEnvVarsCM: ""
## @param extraEnvVarsSecret Name of existing Secret containing extra env vars for JanusGraph nodes
##
extraEnvVarsSecret: ""
## @param extraVolumes Optionally specify extra list of additional volumes for the JanusGraph pod(s)
##
extraVolumes: []
## @param extraVolumeMounts Optionally specify extra list of additional volumeMounts for the JanusGraph container(s)
##
extraVolumeMounts: []
## @param sidecars Add additional sidecar containers to the JanusGraph pod(s)
## e.g:
## sidecars:
##   - name: your-image-name
##     image: your-image
##     imagePullPolicy: Always
##     ports:
##       - name: portname
##         containerPort: 1234
##
sidecars: []
## @param initContainers Add additional init containers to the JanusGraph pod(s)
## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
## e.g:
## initContainers:
##  - name: your-image-name
##    image: your-image
##    imagePullPolicy: Always
##    command: ['sh', '-c', 'echo "hello world"']
##
initContainers: []

## @section Autoscaling
## ref: https://kubernetes.io/docs/tasks/run-application/horizontal-pod-autoscale/
##
autoscaling:
  vpa:
    ## @param autoscaling.vpa.enabled Enable VPA
    ##
    enabled: false
    ## @param autoscaling.vpa.annotations Annotations for VPA resource
    ##
    annotations: {}
    ## @param autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ##
    controlledResources: []
    ## @param autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## cpu: 200m
    ## memory: 100Mi
    maxAllowed: {}
    ## @param autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ## cpu: 200m
    ## memory: 100Mi
    minAllowed: {}
    ## @section VPA update policy
    ##
    updatePolicy:
      ## @param autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updateMode: Auto
  hpa:
    ## @param autoscaling.hpa.enabled Enable HPA
    ##
    enabled: false
    ## @param autoscaling.hpa.minReplicas Minimum number of replicas
    ##
    minReplicas: ""
    ## @param autoscaling.hpa.maxReplicas Maximum number of replicas
    ##
    maxReplicas: ""
    ## @param autoscaling.hpa.targetCPU Target CPU utilization percentage
    ##
    targetCPU: ""
    ## @param autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    targetMemory: ""
## @section Traffic Exposure Parameters
##

## JanusGraph service parameters
##
service:
  ## @param service.type JanusGraph service type
  ##
  type: LoadBalancer
  ## @param service.ports.gremlin JanusGraph service Gremlin port
  ##
  ports:
    gremlin: 8182
  ## Node ports to expose
  ## @param service.nodePorts.gremlin Node port for Gremlin
  ## NOTE: choose port between <30000-32767>
  ##
  nodePorts:
    gremlin: ""
  ## @param service.clusterIP JanusGraph service Cluster IP
  ## e.g.:
  ## clusterIP: None
  ##
  clusterIP: ""
  ## @param service.loadBalancerIP JanusGraph service Load Balancer IP
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
  ##
  loadBalancerIP: ""
  ## @param service.loadBalancerSourceRanges JanusGraph service Load Balancer sources
  ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
  ## e.g:
  ## loadBalancerSourceRanges:
  ##   - 10.10.10.0/24
  ##
  loadBalancerSourceRanges: []
  ## @param service.externalTrafficPolicy JanusGraph service external traffic policy
  ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
  ##
  externalTrafficPolicy: Cluster
  ## @param service.annotations Additional custom annotations for JanusGraph service
  ##
  annotations: {}
  ## @param service.extraPorts Extra ports to expose in JanusGraph service (normally used with the `sidecars` value)
  ##
  extraPorts: []
  ## @param service.sessionAffinity Control where client requests go, to the same pod or round-robin
  ## Values: ClientIP or None
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
  ##
  sessionAffinity: None
  ## @param service.sessionAffinityConfig Additional settings for the sessionAffinity
  ## sessionAffinityConfig:
  ##   clientIP:
  ##     timeoutSeconds: 300
  ##
  sessionAffinityConfig: {}

## @section Persistence Parameters
##

## Enable persistence using Persistent Volume Claims
## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
##
persistence:
  ## @param persistence.enabled Enable persistence using Persistent Volume Claims
  ## NOTE: Janusgraph can be deployed without persistence because the storage will be located in a remote backend.
  ## Enable when using BerkeleyBD or Lucene backends.
  ##
  enabled: false
  ## @param persistence.mountPath Path to mount the volume at.
  ##
  mountPath: /bitnami/janusgraph/data
  ## @param persistence.subPath The subdirectory of the volume to mount to, useful in dev environments and one PV for multiple services
  ##
  subPath: ""
  ## @param persistence.storageClass Storage class of backing PVC
  ## If defined, storageClassName: <storageClass>
  ## If set to "-", storageClassName: "", which disables dynamic provisioning
  ## If undefined (the default) or set to null, no storageClassName spec is
  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
  ##   GKE, AWS & OpenStack)
  ##
  storageClass: ""
  ## @param persistence.annotations Persistent Volume Claim annotations
  ##
  annotations: {}
  ## @param persistence.accessModes Persistent Volume Access Modes
  ##
  accessModes:
    - ReadWriteOnce
  ## @param persistence.size Size of data volume
  ##
  size: 8Gi
  ## @param persistence.existingClaim The name of an existing PVC to use for persistence
  ##
  existingClaim: ""
  ## @param persistence.selector Selector to match an existing Persistent Volume for Janusgraph data PVC
  ## If set, the PVC can't have a PV dynamically provisioned for it
  ## E.g.
  ## selector:
  ##   matchLabels:
  ##     app: my-app
  ##
  selector: {}
  ## @param persistence.dataSource Custom PVC data source
  ##
  dataSource: {}
  ## @param persistence.resourcePolicy Setting it to "keep" to avoid removing PVCs during a helm delete operation. Leaving it empty will delete PVCs after the chart deleted
  ##
  resourcePolicy: ""

## @section Prometheus metrics parameters
##
metrics:
  ## @param metrics.enabled Enable the export of Prometheus metrics
  ##
  enabled: false
  ## Bitnami JMX exporter image
  ## ref: https://hub.docker.com/r/bitnami/jmx-exporter/tags/
  ## @param metrics.image.registry [default: REGISTRY_NAME] JMX exporter image registry
  ## @param metrics.image.repository [default: REPOSITORY_NAME/jmx-exporter] JMX exporter image repository
  ## @skip metrics.image.tag JMX exporter image tag (immutable tags are recommended)
  ## @param metrics.image.digest JMX exporter image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param metrics.image.pullPolicy JMX exporter image pull policy
  ## @param metrics.image.pullSecrets Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/jmx-exporter
    tag: 1.4.0-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets (secrets must be manually created in the namespace)
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Prometheus JMX exporter containers' Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param metrics.containerSecurityContext.enabled Enable Prometheus JMX exporter containers' Security Context
  ## @param metrics.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param metrics.containerSecurityContext.runAsUser Set Prometheus JMX exporter containers' Security Context runAsUser
  ## @param metrics.containerSecurityContext.runAsGroup Group ID for the Prometheus JMX exporter container
  ## @param metrics.containerSecurityContext.runAsNonRoot Set Prometheus JMX exporter containers' Security Context runAsNonRoot
  ## @param metrics.containerSecurityContext.privileged Set Prometheus JMX exporter container's Security Context privileged
  ## @param metrics.containerSecurityContext.allowPrivilegeEscalation Set Prometheus JMX exporter containers' Security Context allowPrivilegeEscalation
  ## @param metrics.containerSecurityContext.readOnlyRootFilesystem Set Prometheus JMX exporter containers' Security Context readOnlyRootFilesystem
  ## @param metrics.containerSecurityContext.capabilities.drop Set Prometheus JMX exporter containers' Security Context capabilities to be dropped
  ## @param metrics.containerSecurityContext.seccompProfile.type Set Prometheus JMX exporter container's Security Context seccomp profile
  ## e.g:
  ##   containerSecurityContext:
  ##     enabled: true
  ##     capabilities:
  ##       drop: ["NET_RAW"]
  ##     readOnlyRootFilesystem: true
  ##
  containerSecurityContext:
    enabled: true
    privileged: false
    runAsNonRoot: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
  ## @param metrics.containerPorts.metrics Prometheus JMX exporter metrics container port
  ##
  containerPorts:
    metrics: 5556
  ## Prometheus JMX exporter resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param metrics.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.resources is set (metrics.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param metrics.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Configure extra options for liveness probe
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param metrics.livenessProbe.enabled Enable livenessProbe
  ## @param metrics.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param metrics.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param metrics.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param metrics.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param metrics.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 60
    periodSeconds: 10
    timeoutSeconds: 10
    successThreshold: 1
    failureThreshold: 3
  ## Configure extra options for readiness probe
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param metrics.readinessProbe.enabled Enable readinessProbe
  ## @param metrics.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param metrics.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param metrics.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param metrics.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param metrics.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 30
    periodSeconds: 10
    timeoutSeconds: 10
    successThreshold: 1
    failureThreshold: 3
  ## Prometheus JMX exporter service configuration
  ##
  service:
    ## @param metrics.service.ports.metrics Prometheus JMX exporter metrics service port
    ##
    ports:
      metrics: 5556
    ## @param metrics.service.clusterIP Static clusterIP or None for headless services
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#choosing-your-own-ip-address
    ##
    clusterIP: ""
    ## @param metrics.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param metrics.service.annotations [object] Annotations for the Prometheus JMX exporter service
    ##
    annotations:
      prometheus.io/scrape: "true"
      prometheus.io/port: "{{ .Values.metrics.service.ports.metrics }}"
      prometheus.io/path: "/"
  ## @param metrics.config [string] Configuration file for JMX exporter
  ## Specify content for jmx-prometheus.yml. Evaluated as a template
  ##
  config: |-
    jmxUrl: service:jmx:rmi:///jndi/rmi://127.0.0.1:{{ .Values.containerPorts.jmx }}/jmxrmi
    lowercaseOutputName: true
    lowercaseOutputLabelNames: true
    ssl: false
    rules:
      - pattern: ".*"
  ## @param metrics.existingConfigmap Name of existing ConfigMap with JMX exporter configuration
  ## NOTE: This will override metrics.config
  ##
  existingConfigmap: ""
  ## Prometheus Operator ServiceMonitor configuration
  ##
  serviceMonitor:
    ## @param metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
    ##
    enabled: false
    ## @param metrics.serviceMonitor.namespace Namespace in which Prometheus is running
    ##
    namespace: ""
    ## @param metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
    ##
    annotations: {}
    ## @param metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
    ##
    labels: {}
    ## @param metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
    ##
    jobLabel: ""
    ## @param metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
    ##
    honorLabels: false
    ## @param metrics.serviceMonitor.interval Interval at which metrics should be scraped.
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ## e.g:
    ## interval: 10s
    ##
    interval: ""
    ## @param metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ## e.g:
    ## scrapeTimeout: 10s
    ##
    scrapeTimeout: ""
    ## @param metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
    ##
    metricRelabelings: []
    ## @param metrics.serviceMonitor.relabelings Specify general relabeling
    ##
    relabelings: []
    ## @param metrics.serviceMonitor.selector Prometheus instance selector labels
    ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
    ## selector:
    ##   prometheus: my-prometheus
    ##
    selector: {}

## @section Other Parameters
##

## 'volumePermissions' init container parameters
## Changes the owner and group of the persistent volume mount point to runAsUser:fsGroup values
##   based on the *podSecurityContext/*containerSecurityContext parameters
##
volumePermissions:
  ## @param volumePermissions.enabled Enable init container that changes the owner/group of the PV mount point to `runAsUser:fsGroup`
  ##
  enabled: false
  ## OS Shell + Utility image
  ## ref: https://hub.docker.com/r/bitnami/os-shell/tags/
  ## @param volumePermissions.image.registry [default: REGISTRY_NAME] OS Shell + Utility image registry
  ## @param volumePermissions.image.repository [default: REPOSITORY_NAME/os-shell] OS Shell + Utility image repository
  ## @skip volumePermissions.image.tag OS Shell + Utility image tag (immutable tags are recommended)
  ## @param volumePermissions.image.pullPolicy OS Shell + Utility image pull policy
  ## @param volumePermissions.image.pullSecrets OS Shell + Utility image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/os-shell
    tag: 12-debian-12-r51
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Init container's resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param volumePermissions.resources.limits The resources limits for the init container
  ## @param volumePermissions.resources.requests The requested resources for the init container
  ##
  resources:
    limits: {}
    requests: {}
  ## Init container Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param volumePermissions.containerSecurityContext.runAsUser Set init container's Security Context runAsUser
  ## NOTE: when runAsUser is set to special value "auto", init container will try to chown the
  ##   data folder to auto-determined user&group, using commands: `id -u`:`id -G | cut -d" " -f2`
  ##   "auto" is especially useful for OpenShift which has scc with dynamic user ids (and 0 is not allowed)
  ##
  containerSecurityContext:
    runAsUser: 0

## ServiceAccount configuration
##
serviceAccount:
  ## @param serviceAccount.create Specifies whether a ServiceAccount should be created
  ##
  create: true
  ## @param serviceAccount.name The name of the ServiceAccount to use.
  ## If not set and create is true, a name is generated using the common.names.fullname template
  ##
  name: ""
  ## @param serviceAccount.annotations Additional Service Account annotations (evaluated as a template)
  ##
  annotations: {}
  ## @param serviceAccount.automountServiceAccountToken Automount service account token for the server service account
  ##
  automountServiceAccountToken: false

## @section NetworkPolicy parameters
## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Enable creation of NetworkPolicy resources
  ##
  enabled: true
  ## @param networkPolicy.allowExternal The Policy model to apply
  ## When set to false, only pods with the correct client label will have network access to the ports Janusgraph is
  ## listening on. When true, Janusgraph will accept connections from any source (with the correct destination port).
  ##
  allowExternal: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}

## @section Cassandra storage sub-chart
## Controlled by value storageBackend.cassandra.enabled
##
cassandra:
  ## @param cassandra.keyspace Name for cassandra's janusgraph keyspace
  ##
  keyspace: "bitnami_janusgraph"
  ## Database credentials
  ## @param cassandra.dbUser.user Cassandra admin user
  ## @param cassandra.dbUser.password Password for `dbUser.user`. Randomly generated if empty
  ##
  dbUser:
    user: bn_janusgraph
    password: ""
  ## Cassandra service port
  ## @param cassandra.service.ports.cql Cassandra cql port
  service:
    ports:
      cql: 9043
