# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets, defaultStorageClass and compatibility.
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters
##

## @param nameOverride String to partially override common.names.fullname
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride: ""
## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
##
kubeVersion: ""
## @param commonLabels Labels to add to all deployed objects (sub-charts are not considered)
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}
## Enable diagnostic mode in the deployment
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the deployment
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the deployment
  ##
  args:
    - infinity
## @section Jaeger parameters
##

## Bitnami Jaeger image
## ref: https://hub.docker.com/r/bitnami/jaeger/tags/
## @param image.registry [default: REGISTRY_NAME] Jaeger image registry
## @param image.repository [default: REPOSITORY_NAME/jaeger] Jaeger image repository
## @skip image.tag Jaeger image tag (immutable tags are recommended)
## @param image.digest Jaeger image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy image pull policy
## @param image.pullSecrets Jaeger image pull secrets
## @param image.debug Enable image debug mode
##
image:
  registry: docker.io
  repository: bitnami/jaeger
  tag: 2.9.0-debian-12-r1
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
  ## Enable debug mode
  ##
  debug: false
## @section Query deployment parameters
##
query:
  ## @param query.command Command for running the container (set to default if not set). Use array form
  ##
  command: []
  ## @param query.args Args for running the container (set to default if not set). Use array form
  ##
  args: []
  ## @param query.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param query.hostAliases Set pod host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param query.lifecycleHooks [object] Override default etcd container hooks
  ##
  lifecycleHooks: {}
  ## @param query.extraEnvVars Extra environment variables to be set on jaeger container
  ## For example:
  ##  - name: FOO
  ##    value: BAR
  ##
  extraEnvVars: []
  ## @param query.extraEnvVarsCM Name of existing ConfigMap containing extra env vars
  ##
  extraEnvVarsCM: ""
  ## @param query.extraEnvVarsSecret Name of existing Secret containing extra env vars
  ##
  extraEnvVarsSecret: ""
  ## @param query.replicaCount Number of Jaeger replicas
  ##
  replicaCount: 1
  ## Configure extra options for container's liveness, readiness and startup probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
  ## @param query.livenessProbe.enabled Enable livenessProbe on Query nodes
  ## @param query.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param query.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param query.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param query.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param query.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## @param query.startupProbe.enabled Enable startupProbe on Query containers
  ## @param query.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param query.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param query.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param query.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param query.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 10
    periodSeconds: 10
    timeoutSeconds: 1
    failureThreshold: 15
    successThreshold: 1
  ## @param query.readinessProbe.enabled Enable readinessProbe
  ## @param query.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param query.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param query.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param query.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param query.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 10
    periodSeconds: 10
    timeoutSeconds: 1
    failureThreshold: 15
    successThreshold: 1
  ## @param query.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param query.customStartupProbe [object] Override default startup probe
  ##
  customStartupProbe: {}
  ## @param query.customReadinessProbe [object] Override default readiness probe
  ##
  customReadinessProbe: {}
  ## Jaeger pods' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## Minimum memory for development is 4GB and 2 CPU cores
  ## Minimum memory for production is 8GB and 4 CPU cores
  ## ref: http://docs.datastax.com/en/archived/jaeger/2.0/jaeger/architecture/architecturePlanningHardware_c.html
  ##
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param query.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if query.resources is set (query.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "small"
  ## @param query.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param query.extraVolumeMounts Optionally specify extra list of additional volumeMounts for jaeger container
  ##
  extraVolumeMounts: []
  ## @param query.configuration Specify content for Jaeger collector configuration (auto-generated based on other values otherwise)
  ##
  configuration: {}
  ## @param query.overrideConfiguration Jaeger query common configuration override. Values defined here takes precedence over the ones defined at `query.configuration`
  ##
  overrideConfiguration: {}
  ## @param query.existingConfigmap The name of an existing ConfigMap with your custom configuration for Jaeger collector
  ##
  existingConfigmap: ""
  ## Container ports to expose
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
  containerPorts:
    ## @param query.containerPorts.grpc Port for GRPC API
    ##
    grpc: 16685
    ## @param query.containerPorts.http Port for HTTP API
    ##
    http: 16686
    ## @param query.containerPorts.metrics Jaeger query prometheus metrics port
    ##
    metrics: 8888
    ## @param query.containerPorts.healthcheck Jaeger query healthcheck port
    ##
    healthcheck: 13133
  ## Jaeger query.service parameters
  ##
  service:
    ## @param query.service.type Jaeger service type
    ##
    type: ClusterIP
    ## Ports to expose
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
    ports:
      ## @param query.service.ports.grpc Port for gRPC API
      ##
      grpc: 16685
      ## @param query.service.ports.http Port for API
      ##
      http: 16686
      ## @param query.service.ports.metrics Jaeger query prometheus metrics port
      ##
      metrics: 8888
    ## Node ports to expose
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
    nodePorts:
      ## @param query.service.nodePorts.grpc Port for gRPC API
      ##
      grpc: ""
      ## @param query.service.nodePorts.http Node port for API
      ##
      http: ""
      ## @param query.service.nodePorts.metrics Jaeger query prometheus metrics port
      ##
      metrics: ""
    ## @param query.service.extraPorts Extra ports to expose in the service (normally used with the `sidecar` value)
    ##
    extraPorts: []
    ## @param query.service.loadBalancerIP LoadBalancerIP if service type is `LoadBalancer`
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
    ##
    loadBalancerIP: ""
    ## @param query.service.loadBalancerSourceRanges Service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param query.service.clusterIP Service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param query.service.externalTrafficPolicy Service external traffic policy
    ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param query.service.annotations Provide any additional annotations which may be required.
    ## This can be used to set the LoadBalancer service type to internal only.
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
    ##
    annotations: {}
    ## @param query.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
    ## If "ClientIP", consecutive client requests will be directed to the same Pod
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
    ##
    sessionAffinity: None
    ## @param query.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
    ## @param query.service.metrics.annotations [object] Annotations for Prometheus metrics
    metrics:
      annotations:
        prometheus.io/scrape: "true"
        prometheus.io/port: "{{ .Values.query.service.ports.metrics }}"
        prometheus.io/path: "/metrics"
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param query.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param query.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param query.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param query.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param query.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param query.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param query.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## Jaeger Query serviceAccount parameters
  ##
  serviceAccount:
    ## @param query.serviceAccount.create Enables ServiceAccount
    ##
    create: true
    ## @param query.serviceAccount.name ServiceAccount name
    ##
    name: ""
    ## @param query.serviceAccount.annotations Annotations to add to all deployed objects
    ##
    annotations: {}
    ## @param query.serviceAccount.automountServiceAccountToken Automount API credentials for a service account.
    ##
    automountServiceAccountToken: false
  ## Pod security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param query.podSecurityContext.enabled Enabled Jaeger pods' Security Context
  ## @param query.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param query.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param query.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param query.podSecurityContext.fsGroup Set Jaeger pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param query.containerSecurityContext.enabled Enabled containers' Security Context
  ## @param query.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param query.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param query.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param query.containerSecurityContext.runAsNonRoot Set container's Security Context runAsNonRoot
  ## @param query.containerSecurityContext.privileged Set container's Security Context privileged
  ## @param query.containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
  ## @param query.containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
  ## @param query.containerSecurityContext.capabilities.drop List of capabilities to be dropped
  ## @param query.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
  ## @param query.podAnnotations Additional pod annotations
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param query.podLabels Additional pod labels
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param query.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param query.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param query.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param query.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
    ##
    key: ""
    ## @param query.nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param query.priorityClassName Server priorityClassName
  ## Ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
  ##
  priorityClassName: ""
  ## @param query.affinity Affinity for pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: podAffinityPreset, podAntiAffinityPreset, and nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param query.nodeSelector Node labels for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param query.tolerations Tolerations for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param query.topologySpreadConstraints Topology Spread Constraints for pod assignment
  ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  ## The value is evaluated as a template
  ##
  topologySpreadConstraints: []
  ## @param query.schedulerName Alternative scheduler
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param query.updateStrategy.type Jaeger query deployment strategy type
  ## @param query.updateStrategy.rollingUpdate Jaeger query deployment rolling update configuration parameters
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
  ##
  updateStrategy:
    type: RollingUpdate
    rollingUpdate: {}
  ## @param query.extraVolumes Optionally specify extra list of additional volumes for jaeger container
  ##
  extraVolumes: []
  ## @param query.initContainers Add additional init containers to the jaeger pods
  ##
  initContainers: []
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param query.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param query.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param query.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `query.pdb.minAvailable` and `query.pdb.maxUnavailable` are empty.
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## @param query.sidecars Add additional sidecar containers to the jaeger pods
  ##
  sidecars: []
## @section Collector deployment parameters
##
collector:
  ## @param collector.command Command for running the container (set to default if not set). Use array form
  ##
  command: []
  ## @param collector.args Args for running the container (set to default if not set). Use array form
  ##
  args: []
  ## @param collector.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param collector.hostAliases Set pod host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param collector.lifecycleHooks [object] Override default etcd container hooks
  ##
  lifecycleHooks: {}
  ## @param collector.extraEnvVars Extra environment variables to be set on jaeger container
  ## For example:
  ##  - name: FOO
  ##    value: BAR
  ##
  extraEnvVars: []
  ## @param collector.extraEnvVarsCM Name of existing ConfigMap containing extra env vars
  ##
  extraEnvVarsCM: ""
  ## @param collector.extraEnvVarsSecret Name of existing Secret containing extra env vars
  ##
  extraEnvVarsSecret: ""
  ## @param collector.replicaCount Number of Jaeger replicas
  ##
  replicaCount: 1
  ## Configure extra options for container's liveness, readiness and startup probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
  ## @param collector.livenessProbe.enabled Enable livenessProbe on collector nodes
  ## @param collector.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param collector.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param collector.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param collector.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param collector.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    failureThreshold: 3
    initialDelaySeconds: 10
    periodSeconds: 10
    successThreshold: 1
    timeoutSeconds: 1
  ## @param collector.startupProbe.enabled Enable startupProbe on collector containers
  ## @param collector.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param collector.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param collector.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param collector.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param collector.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 10
    periodSeconds: 10
    timeoutSeconds: 1
    failureThreshold: 15
    successThreshold: 1
  ## @param collector.readinessProbe.enabled Enable readinessProbe
  ## @param collector.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param collector.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param collector.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param collector.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param collector.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 10
    periodSeconds: 10
    timeoutSeconds: 1
    failureThreshold: 15
    successThreshold: 1
  ## @param collector.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param collector.customStartupProbe [object] Override default startup probe
  ##
  customStartupProbe: {}
  ## @param collector.customReadinessProbe [object] Override default readiness probe
  ##
  customReadinessProbe: {}
  ## Jaeger pods' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## Minimum memory for development is 4GB and 2 CPU cores
  ## Minimum memory for production is 8GB and 4 CPU cores
  ## ref: http://docs.datastax.com/en/archived/jaeger/2.0/jaeger/architecture/architecturePlanningHardware_c.html
  ##
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param collector.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if collector.resources is set (collector.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "small"
  ## @param collector.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## @param collector.extraVolumeMounts Optionally specify extra list of additional volumeMounts for jaeger container
  ##
  extraVolumeMounts: []
  ## @param collector.configuration Specify content for Jaeger collector configuration (auto-generated based on other values otherwise)
  ##
  configuration: {}
  ## @param collector.overrideConfiguration Jaeger collector common configuration override. Values defined here takes precedence over the ones defined at `query.configuration`
  ##
  overrideConfiguration: {}
  ## @param collector.existingConfigmap The name of an existing ConfigMap with your custom configuration for Jaeger collector
  ##
  existingConfigmap: ""
  ## @param collector.receivers Sets the jaeger collector receivers that will be enabled
  ##
  receivers:
    - otlp
    - jaeger
    - zipkin
  ## Jaeger collector container ports to expose
  ## ref: https://www.jaegertracing.io/docs/latest/architecture/apis/
  containerPorts:
    ## Otlp ports to expose
    ##
    otlp:
      ## @param collector.containerPorts.otlp.grpc Accepts traces in OpenTelemetry OTLP format over gRPC
      ##
      grpc: 4317
      ## @param collector.containerPorts.otlp.http Accepts traces in OpenTelemetry OTLP format over HTTP
      ##
      http: 4318
    ## Legacy Jaeger Write API. Maintained for backward-compatibility
    ##
    jaeger:
      ## @param collector.containerPorts.jaeger.grpc Legacy Jaeger protobuf via gRPC API port
      ##
      grpc: 14250
      ## @param collector.containerPorts.jaeger.thrift_http Legacy Jaeger Thrift over HTTP API port
      ##
      thrift_http: 14268
    ## @param collector.containerPorts.zipkin can accept Zipkin spans in Thrift, JSON and Proto (disabled by default)
    ##
    zipkin: 9411
    ## @param collector.containerPorts.metrics Jaeger collector prometheus metrics port
    ##
    metrics: 8888
    ## @param collector.containerPorts.healthcheck Jaeger collector healthcheck port
    ##
    healthcheck: 13133
  ## Jaeger collector.service parameters
  ##
  service:
    ## @param collector.service.type Jaeger service type
    ##
    type: ClusterIP
    ## Jaeger collector ports to expose
    ## ref: https://www.jaegertracing.io/docs/latest/architecture/apis/
    ports:
      ## Otlp ports to expose
      ##
      otlp:
        ## @param collector.service.ports.otlp.grpc Accepts traces in OpenTelemetry OTLP format over gRPC
        ##
        grpc: 4317
        ## @param collector.service.ports.otlp.http Accepts traces in OpenTelemetry OTLP format over HTTP
        ##
        http: 4318
      ## Legacy Jaeger Write API. Maintained for backward-compatibility
      ##
      jaeger:
        ## @param collector.service.ports.jaeger.grpc Legacy Jaeger protobuf via gRPC API port
        ##
        grpc: 14250
        ## @param collector.service.ports.jaeger.thrift_http Legacy Jaeger Thrift over HTTP API port
        ##
        thrift_http: 14268
      ## @param collector.service.ports.zipkin can accept Zipkin spans in Thrift, JSON and Proto (disabled by default)
      ##
      zipkin: 9411
      ## @param collector.service.ports.metrics Jaeger collector prometheus metrics port
      ##
      metrics: 8888
    ## Node ports to expose
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
    nodePorts:
      ## Otlp ports to expose
      ##
      otlp:
        ## @param collector.service.nodePorts.otlp.grpc Accepts traces in OpenTelemetry OTLP format over gRPC
        ##
        grpc: ""
        ## @param collector.service.nodePorts.otlp.http Accepts traces in OpenTelemetry OTLP format over HTTP
        ##
        http: ""
      ## Legacy Jaeger Write API. Maintained for backward-compatibility
      ##
      jaeger:
        ## @param collector.service.nodePorts.jaeger.grpc Legacy Jaeger protobuf via gRPC API port
        ##
        grpc: ""
        ## @param collector.service.nodePorts.jaeger.thrift_http Legacy Jaeger Thrift over HTTP API port
        ##
        thrift_http: ""
      ## @param collector.service.nodePorts.zipkin can accept Zipkin spans in Thrift, JSON and Proto (disabled by default)
      ##
      zipkin: ""
      ## @param collector.service.nodePorts.metrics Jaeger collector prometheus metrics port
      ##
      metrics: ""

    ## @param collector.service.extraPorts Extra ports to expose in the service (normally used with the `sidecar` value)
    ##
    extraPorts: []
    ## @param collector.service.loadBalancerIP LoadBalancerIP if service type is `LoadBalancer`
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
    ##
    loadBalancerIP: ""
    ## @param collector.service.loadBalancerSourceRanges Service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param collector.service.clusterIP Service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param collector.service.externalTrafficPolicy Service external traffic policy
    ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param collector.service.annotations Provide any additional annotations which may be required.
    ## This can be used to set the LoadBalancer service type to internal only.
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
    ##
    annotations: {}
    ## @param collector.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
    ## If "ClientIP", consecutive client requests will be directed to the same Pod
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
    ##
    sessionAffinity: None
    ## @param collector.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
    ## @param collector.service.metrics.annotations [object] Annotations for Prometheus metrics
    metrics:
      annotations:
        prometheus.io/scrape: "true"
        prometheus.io/port: "{{ .Values.collector.service.ports.metrics }}"
        prometheus.io/path: "/metrics"
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param collector.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param collector.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param collector.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param collector.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param collector.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param collector.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param collector.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## Jaeger collector serviceAccount parameters
  ##
  serviceAccount:
    ## @param collector.serviceAccount.create Enables ServiceAccount
    ##
    create: true
    ## @param collector.serviceAccount.name ServiceAccount name
    ##
    name: ""
    ## @param collector.serviceAccount.annotations Annotations to add to all deployed objects
    ##
    annotations: {}
    ## @param collector.serviceAccount.automountServiceAccountToken Automount API credentials for a service account.
    ##
    automountServiceAccountToken: false
  ## Pod security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param collector.podSecurityContext.enabled Enabled Jaeger pods' Security Context
  ## @param collector.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param collector.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param collector.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param collector.podSecurityContext.fsGroup Set Jaeger pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context (only main container)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param collector.containerSecurityContext.enabled Enabled containers' Security Context
  ## @param collector.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param collector.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param collector.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param collector.containerSecurityContext.runAsNonRoot Set container's Security Context runAsNonRoot
  ## @param collector.containerSecurityContext.privileged Set container's Security Context privileged
  ## @param collector.containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
  ## @param collector.containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
  ## @param collector.containerSecurityContext.capabilities.drop List of capabilities to be dropped
  ## @param collector.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
  ## @param collector.podAnnotations Additional pod annotations
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param collector.podLabels Additional pod labels
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param collector.podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param collector.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node affinity preset
  ## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param collector.nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param collector.nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
    ##
    key: ""
    ## @param collector.nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param collector.priorityClassName Server priorityClassName
  ## Ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/
  ##
  priorityClassName: ""
  ## @param collector.affinity Affinity for pod assignment
  ## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: podAffinityPreset, podAntiAffinityPreset, and nodeAffinityPreset will be ignored when it's set
  ##
  affinity: {}
  ## @param collector.nodeSelector Node labels for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param collector.tolerations Tolerations for pod assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param collector.topologySpreadConstraints Topology Spread Constraints for pod assignment
  ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  ## The value is evaluated as a template
  ##
  topologySpreadConstraints: []
  ## @param collector.schedulerName Alternative scheduler
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param collector.updateStrategy.type Jaeger collector deployment strategy type
  ## @param collector.updateStrategy.rollingUpdate Jaeger collector deployment rolling update configuration parameters
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
  ##
  updateStrategy:
    type: RollingUpdate
    rollingUpdate: {}
  ## @param collector.extraVolumes Optionally specify extra list of additional volumes for jaeger container
  ##
  extraVolumes: []
  ## @param collector.initContainers Add additional init containers to the jaeger pods
  ##
  initContainers: []
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param collector.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param collector.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param collector.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `collector.pdb.minAvailable` and `collector.pdb.maxUnavailable` are empty.
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
  ## @param collector.sidecars Add additional sidecar containers to the jaeger pods
  ##
  sidecars: []
migration:
  ## @param migration.podLabels Additional pod labels
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param migration.podAnnotations Additional pod annotations
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param migration.annotations Provide any additional annotations which may be required.
  ## This can be used to set the LoadBalancer service type to internal only.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
  ##
  annotations: {}
  ## Pod security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param migration.podSecurityContext.enabled Enabled Jaeger pods' Security Context
  ## @param migration.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param migration.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param migration.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param migration.podSecurityContext.fsGroup Set Jaeger pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## @param migration.containerSecurityContext.enabled Enabled containers' Security Context
  ## @param migration.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param migration.containerSecurityContext.runAsUser Set containers' Security Context runAsUser
  ## @param migration.containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
  ## @param migration.containerSecurityContext.runAsNonRoot Set container's Security Context runAsNonRoot
  ## @param migration.containerSecurityContext.privileged Set container's Security Context privileged
  ## @param migration.containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
  ## @param migration.containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
  ## @param migration.containerSecurityContext.capabilities.drop List of capabilities to be dropped
  ## @param migration.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
  ## @param migration.extraEnvVars Extra environment variables to be set on jaeger migration container
  ## For example:
  ##  - name: FOO
  ##    value: BAR
  ##
  extraEnvVars: []
  ## @param migration.extraEnvVarsCM Name of existing ConfigMap containing extra env vars
  ##
  extraEnvVarsCM: ""
  ## @param migration.extraEnvVarsSecret Name of existing Secret containing extra env vars
  ##
  extraEnvVarsSecret: ""
  ## @param migration.extraVolumeMounts Optionally specify extra list of additional volumeMounts for jaeger container
  ##
  extraVolumeMounts: []
  ## Jaeger pods' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## Minimum memory for development is 4GB and 2 CPU cores
  ## Minimum memory for production is 8GB and 4 CPU cores
  ## ref: http://docs.datastax.com/en/archived/jaeger/2.0/jaeger/architecture/architecturePlanningHardware_c.html
  ##
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param migration.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if migration.resources is set (migration.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "small"
  ## @param migration.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  initContainer:
    ## Migration job init container resource requests and limits
    ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
    ##
    ## We usually recommend not to specify default resources and to leave this as a conscious
    ## choice for the user. This also increases chances charts run on environments with little
    ## resources, such as Minikube. If you do want to specify resources, uncomment the following
    ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    ## @param migration.initContainer.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if migration.resources is set (migration.resources is recommended for production).
    ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
    ##
    resourcesPreset: "nano"
    ## @param migration.initContainer.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
    ## Example:
    ## resources:
    ##   requests:
    ##     cpu: 2
    ##     memory: 512Mi
    ##   limits:
    ##     cpu: 3
    ##     memory: 1024Mi
    ##
    resources: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param migration.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param migration.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param migration.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param migration.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param migration.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param migration.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param migration.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## @param migration.extraVolumes Optionally specify extra list of additional volumes for jaeger container
  ##
  extraVolumes: []
## @section Set the image to use for the migration job
## @param cqlshImage.registry [default: REGISTRY_NAME] Cassandra image registry
## @param cqlshImage.repository [default: REPOSITORY_NAME/cassandra] Cassandra image repository
## @skip cqlshImage.tag Cassandra image tag (immutable tags are recommended)
## @param cqlshImage.digest Cassandra image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param cqlshImage.pullPolicy image pull policy
## @param cqlshImage.pullSecrets Cassandra image pull secrets
## @param cqlshImage.debug Enable image debug mode
##
cqlshImage:
  registry: docker.io
  repository: bitnami/cassandra
  tag: 5.0.5-debian-12-r7
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
  ## cqlshImage container resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ##
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param cqlshImage.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param cqlshImage.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Enable debug mode
  ##
  debug: false
externalDatabase:
  ## @param externalDatabase.host External database host
  host: ""
  ## @param externalDatabase.port External database port
  port: 9042
  ## Database credentials
  ## @param externalDatabase.dbUser.user Cassandra admin user
  ## @param externalDatabase.dbUser.password Password for `dbUser.user`. Randomly generated if empty
  ##
  dbUser:
    user: bn_jaeger
    password: ""
  ## @param externalDatabase.existingSecret Name of existing secret containing the database secret
  ##
  existingSecret: ""
  ## @param externalDatabase.existingSecretPasswordKey Name of existing secret key containing the database password secret key
  ##
  existingSecretPasswordKey: ""
  ## Cluster parameters
  ## @param externalDatabase.cluster.datacenter Name for cassandra's jaeger datacenter
  ##
  cluster:
    datacenter: "dc1"
  ## @param externalDatabase.keyspace Name for cassandra's jaeger keyspace
  ##
  keyspace: "bitnami_jaeger"
## @section Cassandra storage sub-chart
##
cassandra:
  ## @param cassandra.enabled Enables cassandra storage pod
  ##
  enabled: true
  ## Cluster parameters
  ## @param cassandra.cluster.datacenter Name for cassandra's jaeger datacenter
  ##
  cluster:
    datacenter: "dc1"
  ## @param cassandra.keyspace Name for cassandra's jaeger keyspace
  ##
  keyspace: "bitnami_jaeger"
  ## Database credentials
  ## @param cassandra.dbUser.user Cassandra admin user
  ## @param cassandra.dbUser.password Password for `dbUser.user`. Randomly generated if empty
  ## @param cassandra.dbUser.existingSecret Name of an existing secret containing the user password.
  ##
  dbUser:
    user: bn_jaeger
    password: ""
    existingSecret: ""
  ## Cassandra service port
  ## @param cassandra.service.ports.cql Cassandra cql port
  service:
    ports:
      cql: 9042
  ## @param cassandra.initDB [object] Init script for initializing the instance
  ##
  initDB:
    create_keyspace.cql: |
      CREATE KEYSPACE {{ include "jaeger.cassandra.keyspace" . }} WITH REPLICATION = { 'class' : 'SimpleStrategy', 'replication_factor' : 1 };
  ## Cassandra pods' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## Minimum memory for development is 4GB and 2 CPU cores
  ## Minimum memory for production is 8GB and 4 CPU cores
  ## ref: http://docs.datastax.com/en/archived/cassandra/2.0/cassandra/architecture/architecturePlanningHardware_c.html
  ##
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param cassandra.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "large"
  ## @param cassandra.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
