# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters

## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
##
kubeVersion: ""
## @param apiVersions Override Kubernetes API versions reported by .Capabilities
##
apiVersions: []
## @param clusterDomain Kubernetes Cluster Domain
##
clusterDomain: cluster.local
## @param nameOverride String to partially override common.names.fullname template (will maintain the release name)
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname template
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""
## @param commonLabels Add labels to all the deployed resources
##
commonLabels: {}
## @param commonAnnotations Add annotations to all the deployed resources
##
commonAnnotations: {}
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []
## Enable diagnostic mode in the deployment(s)/statefulset(s)
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the the deployment(s)/statefulset(s)
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the the deployment(s)/statefulset(s)
  ##
  args:
    - infinity
## @section Gitlab Runner parameters

## Bitnami Gitlab Runner image version
## ref: https://hub.docker.com/r/bitnami/gitlab-runner/tags/
## @param image.registry [default: REGISTRY_NAME] Gitlab Runner image registry
## @param image.repository [default: REPOSITORY_NAME/gitlab-runner] Gitlab Runner image repository
## @skip image.tag Gitlab Runner image tag (immutable tags are recommended)
## @param image.digest Gitlab Runner image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy Gitlab Runner image pull policy
## @param image.pullSecrets Gitlab Runner image pull secrets
##
image:
  registry: docker.io
  repository: bitnami/gitlab-runner
  tag: 18.3.0-debian-12-r0
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
## Bitnami Gitlab Runner Helper image
## ref: https://hub.docker.com/r/bitnami/gitlab-runner-helper/tags/
## @param helperImage.registry [default: REGISTRY_NAME] Gitlab Runner Helper image registry
## @param helperImage.repository [default: REPOSITORY_NAME/gitlab-runner-helper] Gitlab Runner Helper image repository
## @skip helperImage.tag Gitlab Runner Helper image tag (immutable tags are recommended)
## @param helperImage.digest Gitlab Runner Helper image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag image tag (immutable tags are recommended)
## @param helperImage.pullPolicy Gitlab Runner Helper image pull policy
## @param helperImage.pullSecrets Gitlab Runner Helper image pull secrets
##
helperImage:
  registry: docker.io
  repository: bitnami/gitlab-runner-helper
  tag: 18.3.0-debian-12-r0
  digest: ""
  ## Specify a imagePullPolicy
  ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
## @param automountServiceAccountToken Mount Service Account token in pod
##
automountServiceAccountToken: true
## @param hostAliases Add deployment host aliases
## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
##
hostAliases: []
## @param replicaCount Number of gitlab-runner nodes to deploy
##
replicaCount: 1
## @param gitlabUrl GitLab Server URL (with protocol) to register the runner
##
gitlabUrl: ""
## @param runnerToken Token for adding new Runners to the GitLab Server
##
runnerToken: ""
## @param existingSecret Name of a secret containing the runner token
##
existingSecret: ""
## @param existingCacheSecret Name of a secret containing the distributed cache credentials
##
existingCacheSecret: ""
## @param existingConfigMap Name of a ConfigMap containing the configuration and scripts
##
existingConfigMap: ""
## @param extraConfig Append extra configuration to the default config file
##
extraConfig: ""
## @param unregisterRunners Unregister all runners before termination
unregisterRunners: true
## @param existingCertsSecret Name of a secret containing custom certificates to connect to the Gitlab instance.
##
existingCertsSecret: ""
## @param concurrent Maximum number of concurrent jobs
##
concurrent: 10
## @param shutdownTimeout Time in seconds before a forceful shutdown
##
shutdownTimeout: 0
## @param checkInterval Time in seconds to check for Gitlab builds
##
checkInterval: 3
## @param logLevel Runner logging level
##
logLevel: info
## @param logFormat Runner logging format
##
logFormat: runner
## @param sentryDsn Runner's Sentry DSN.
##
sentryDsn: ""
## @param connectionMaxAge Maximum connection age for TLS keepalive connections.
## ref https://docs.gitlab.com/runner/configuration/advanced-configuration.html#the-global-section
##
connectionMaxAge: "15m"
## @param preEntrypointScript Commands to execute prior to the entrypoint
##
preEntrypointScript: ""
## @param updateStrategy.type Set up update strategy for gitlab-runner installation.
## Set to Recreate if you use persistent volume that cannot be mounted by more than one pods to make sure the pods is destroyed first.
## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
## Example:
## updateStrategy:
##  type: RollingUpdate
##  rollingUpdate:
##    maxSurge: 25%
##    maxUnavailable: 25%
##
updateStrategy:
  type: RollingUpdate
## Autoscaling configuration
## ref: https://kubernetes.io/docs/tasks/run-application/horizontal-pod-autoscale/
##
autoscaling:
  vpa:
    ## @param autoscaling.vpa.enabled Enable VPA
    ##
    enabled: false
    ## @param autoscaling.vpa.annotations Annotations for VPA resource
    ##
    annotations: {}
    ## @param autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ##
    controlledResources: []
    ## @param autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## cpu: 200m
    ## memory: 100Mi
    maxAllowed: {}
    ## @param autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ## cpu: 200m
    ## memory: 100Mi
    minAllowed: {}
    updatePolicy:
      ## @param autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updateMode: Auto
  hpa:
    ## @param autoscaling.hpa.enabled Enable autoscaling for operator
    ##
    enabled: false
    ## @param autoscaling.hpa.minReplicas Minimum number of operator replicas
    ##
    minReplicas: ""
    ## @param autoscaling.hpa.maxReplicas Maximum number of operator replicas
    ##
    maxReplicas: ""
    ## @param autoscaling.hpa.targetCPU Target CPU utilization percentage
    ##
    targetCPU: ""
    ## @param autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    targetMemory: ""
## Role Based Access
## ref: https://kubernetes.io/docs/admin/authorization/rbac/
##
rbac:
  ## @param rbac.create Enable RBAC authentication
  ##
  create: true
  ## @param rbac.clusterWideAccess Allow runner cluster-wide access
  ##
  clusterWideAccess: false
  ## @param rbac.rules Define list of rules to be added to the rbac role permissions
  ##
  rules: []
## Pods Service Account
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
##
serviceAccount:
  ## @param serviceAccount.create Specifies whether a ServiceAccount should be created
  ##
  create: true
  ## @param serviceAccount.name The name of the ServiceAccount to create
  ## If not set and create is true, a name is generated using the common.names.fullname template
  name: ""
  ## @param serviceAccount.automountServiceAccountToken Automount API credentials for a service account
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/#use-the-default-service-account-to-access-the-api-server
  ##
  automountServiceAccountToken: false
  ## @param serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
  ##
  annotations: {}
## @param containerPorts.metrics Port where gitlab-runner will expose metrics
## @param containerPorts.sessionServer Port where gitlab-runner will use the sessionServer
##
containerPorts:
  metrics: 9252
  sessionServer: 8093
## @param dnsPolicy Default dnsPolicy setting
## If you enable hostNetwork then you may need to set your dnsPolicy to something other
## than "ClusterFirst" depending on your requirements.
dnsPolicy: "ClusterFirst"
## @param command Override default container command (useful when using custom images)
##
command: []
## @param args Override default container args (useful when using custom images)
##
args: []
## @param lifecycleHooks for the gitlab-runner container(s) to automate configuration before or after startup
##
lifecycleHooks: {}
## @param extraEnvVars Array with extra environment variables to add to gitlab-runner nodes
## e.g:
## extraEnvVars:
##   - name: FOO
##     value: "bar"
##
extraEnvVars: []
## @param extraEnvVarsCM Name of existing ConfigMap containing extra env vars for gitlab-runner nodes
##
extraEnvVarsCM: ""
## @param extraEnvVarsSecret Name of existing Secret containing extra env vars for gitlab-runner nodes
##
extraEnvVarsSecret: ""
## @param extraArgs Extra arguments to pass to gitlab-runner on start up
## ref: https://github.com/kubernetes-incubator/gitlab-runner#flags
##
## extraArgs:
##   - --kubelet-insecure-tls=true
##   - --kubelet-preferred-address-types=InternalIP
##
extraArgs: []
## @param sidecars Add additional sidecar containers to the gitlab-runner pod(s)
## e.g:
## sidecars:
##   - name: your-image-name
##     image: your-image
##     imagePullPolicy: Always
##     ports:
##       - name: portname
##         containerPort: 1234
##
sidecars: []
## @param initContainers Add additional init containers to the gitlab-runner pod(s)
## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
## e.g:
## initContainers:
##  - name: your-image-name
##    image: your-image
##    imagePullPolicy: Always
##    command: ['sh', '-c', 'echo "hello world"']
##
initContainers: []
## @param podLabels Pod labels
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
##
podLabels: {}
## @param podAnnotations Pod annotations
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}
## @param priorityClassName Priority class for pod scheduling
## ref: https://kubernetes.io/docs/concepts/configuration/pod-priority-preemption/#priorityclass
priorityClassName: ""
## @param schedulerName Name of the k8s scheduler (other than default)
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""
## @param terminationGracePeriodSeconds In seconds, time the given to the gitlab-runner pod needs to terminate gracefully
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
##
terminationGracePeriodSeconds: ""
## @param podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAffinityPreset: ""
## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAntiAffinityPreset: soft
## Pod disruption budget
## ref: https://kubernetes.io/docs/concepts/workloads/pods/disruptions/#pod-disruption-budgets
## @param pdb.create Create a PodDisruptionBudget
## @param pdb.minAvailable Minimum available instances
## @param pdb.maxUnavailable Maximum unavailable instances
##
pdb:
  create: true
  minAvailable: ""
  maxUnavailable: ""
## Node affinity preset
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
##
nodeAffinityPreset:
  ## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ##
  type: ""
  ## @param nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set.
  ## E.g.
  ## key: "kubernetes.io/e2e-az-name"
  ##
  key: ""
  ## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set.
  ## E.g.
  ## values:
  ##   - e2e-az1
  ##   - e2e-az2
  ##
  values: []
## @param affinity Affinity for pod assignment
## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
## Note: podAffinityPreset, podAntiAffinityPreset, and nodeAffinityPreset will be ignored when it's set
##
affinity: {}
## @param topologySpreadConstraints Topology spread constraints for pod
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints
##
topologySpreadConstraints: []
## @param nodeSelector Node labels for pod assignment
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
##
nodeSelector: {}
## @param tolerations Tolerations for pod assignment
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
## Network Policy configuration
## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Enable creation of NetworkPolicy resources
  ##
  enabled: true
  ## @param networkPolicy.allowExternal The Policy model to apply
  ## When set to false, only pods with the correct client label will have network access to the ports Gitlab Runner is
  ## listening on. When true, Gitlab Runner will accept connections from any source (with the correct destination port).
  ##
  allowExternal: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.kubeAPIServerPorts [array] List of possible endpoints to kubernetes components like kube-apiserver or kubelet (limit to your cluster settings to increase security)
  ##
  kubeAPIServerPorts: [443, 6443, 8443, 10250]
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}
## Gitlab Runner containers' resource requests and limits
## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
## We usually recommend not to specify default resources and to leave this as a conscious
## choice for the user. This also increases chances charts run on environments with little
## resources, such as Minikube. If you do want to specify resources, uncomment the following
## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
## @param resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
##
resourcesPreset: "small"
## @param resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
## Example:
## resources:
##   requests:
##     cpu: 2
##     memory: 512Mi
##   limits:
##     cpu: 3
##     memory: 1024Mi
##
resources: {}
## Configure extra options for gitlab-runner containers' liveness, readiness and startup probes
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes)
## @param startupProbe.enabled Enable startupProbe
## @param startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
## @param startupProbe.periodSeconds Period seconds for startupProbe
## @param startupProbe.timeoutSeconds Timeout seconds for startupProbe
## @param startupProbe.failureThreshold Failure threshold for startupProbe
## @param startupProbe.successThreshold Success threshold for startupProbe
startupProbe:
  enabled: false
  initialDelaySeconds: 0
  periodSeconds: 10
  timeoutSeconds: 1
  failureThreshold: 3
  successThreshold: 1
## @param livenessProbe.enabled Enable livenessProbe
## @param livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
## @param livenessProbe.periodSeconds Period seconds for livenessProbe
## @param livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
## @param livenessProbe.failureThreshold Failure threshold for livenessProbe
## @param livenessProbe.successThreshold Success threshold for livenessProbe
##
livenessProbe:
  enabled: true
  initialDelaySeconds: 0
  periodSeconds: 10
  timeoutSeconds: 1
  failureThreshold: 3
  successThreshold: 1
## @param readinessProbe.enabled Enable readinessProbe
## @param readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
## @param readinessProbe.periodSeconds Period seconds for readinessProbe
## @param readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
## @param readinessProbe.failureThreshold Failure threshold for readinessProbe
## @param readinessProbe.successThreshold Success threshold for readinessProbe
##
readinessProbe:
  enabled: true
  initialDelaySeconds: 0
  periodSeconds: 10
  timeoutSeconds: 1
  failureThreshold: 3
  successThreshold: 1
## @param customStartupProbe Custom liveness probe for the Web component
##
customStartupProbe: {}
## @param customLivenessProbe Custom Liveness probes for gitlab-runner
##
customLivenessProbe: {}
## @param customReadinessProbe Custom Readiness probes gitlab-runner
##
customReadinessProbe: {}
## Container security context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## @param containerSecurityContext.enabled Enabled containers' Security Context
## @param containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
## @param containerSecurityContext.runAsUser Set containers' Security Context runAsUser
## @param containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
## @param containerSecurityContext.runAsNonRoot Set container's Security Context runAsNonRoot
## @param containerSecurityContext.privileged Set container's Security Context privileged
## @param containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
## @param containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
## @param containerSecurityContext.capabilities.drop List of capabilities to be dropped
## @param containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
##
containerSecurityContext:
  enabled: true
  seLinuxOptions: {}
  runAsUser: 1001
  runAsGroup: 1001
  runAsNonRoot: true
  privileged: false
  readOnlyRootFilesystem: true
  allowPrivilegeEscalation: false
  capabilities:
    drop: ["ALL"]
  seccompProfile:
    type: "RuntimeDefault"
## Pod security context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
## @param podSecurityContext.enabled Pod security context
## @param podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
## @param podSecurityContext.sysctls Set kernel settings using the sysctl interface
## @param podSecurityContext.supplementalGroups Set filesystem extra groups
## @param podSecurityContext.fsGroup Set Pod's Security Context fsGroup
##
podSecurityContext:
  enabled: true
  fsGroupChangePolicy: Always
  sysctls: []
  supplementalGroups: []
  fsGroup: 1001
## Extra volumes to mount
## @param extraVolumes Extra volumes
## @param extraVolumeMounts Mount extra volume(s)
## Example Use Case: mount an `emptyDir` to allow running with a `readOnlyRootFilesystem: true`
##  extraVolumes:
##  - name: tmpdir
##    emptyDir: {}
##
extraVolumes: []
##  extraVolumeMounts:
##  - name: tmpdir
##    mountPath: /tmp
##
extraVolumeMounts: []

## Configuration for the Pods that the runner launches for each new job
##
runners:
  ## @param runners.config [string] configuration for the pods created by the runner
  ##
  config: |
    [[runners]]
      [runners.kubernetes]
        namespace = "{{ include "common.names.namespace" . }}"
        image = "{{ include "gitlab-runner.image" . }}"
        helper_image = "{{ include "gitlab-runner.helper.image" . }}"
        image_pull_secrets = [{{ include "gitlab-runner.imagePullSecretsRaw" . }}]

  ## @param runners.configPath Absolute path for an existing runner configuration file (to be used with volumes/extraVolumes)
  ##
  configPath: ""

  ## @param runners.executor Executor to be used by the runner
  ##
  executor: kubernetes

  ## @param runners.name Name of the runner.
  ##
  name: ""

  ## @param runners.maximumTimeout Specify the maximum timeout (in seconds) that will be set for job when using this Runner
  maximumTimeout: ""

  ## @param runners.runUntagged Allow running jobs without tags
  runUntagged: true

  ## @param runners.protected Run only in protected branches
  ##
  protected: true

## @section Session Server Parameters
##
sessionServer:
  ## @param sessionServer.enabled Enable Session Server
  ##
  enabled: false
  ## @param sessionServer.sessionTimeout Session timeout in seconds
  ##
  sessionTimeout: 1800
  ## Service parameters
  ##
  service:
    ## @param sessionServer.service.type Session Server service type
    ##
    type: ClusterIP
    ## @param sessionServer.service.ports.sessionServer Session Server service port
    ##
    ports:
      sessionServer: 9000
    ## Node ports to expose
    ## @param sessionServer.service.nodePorts.sessionServer Node port for the Session Server
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      sessionServer: ""
    ## @param sessionServer.service.labels Service labels
    ##
    labels: {}
    ## @param sessionServer.service.clusterIP Session Server service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param sessionServer.service.loadBalancerIP Session Server service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param sessionServer.service.loadBalancerSourceRanges Session Server service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param sessionServer.service.externalTrafficPolicy Session Server service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param sessionServer.service.annotations [object] Additional custom annotations for Session Server service
    ##
    annotations: {}
    ## @param sessionServer.service.extraPorts Extra ports to expose in Session Server service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param sessionServer.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param sessionServer.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## ref: http://kubernetes.io/docs/concepts/services-networking/ingress/
  ##
  ingress:
    ## @param sessionServer.ingress.enabled Enable ingress record generation for Session Server
    ##
    enabled: false
    ## @param sessionServer.ingress.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param sessionServer.ingress.apiVersion Force Ingress API version (automatically detected if not set)
    ##
    apiVersion: ""
    ## @param sessionServer.ingress.hostname Default host for the ingress record
    ##
    hostname: session-server.local
    ## @param sessionServer.ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param sessionServer.ingress.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @param sessionServer.ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations: {}
    ## @param sessionServer.ingress.tls Enable TLS configuration for the host defined at `sessionServer.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.ingress.hostname }}`
    ## You can:
    ##   - Use the `sessionServer.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `sessionServer.ingress.selfSigned=true`
    ##
    tls: false
    ## @param sessionServer.ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param sessionServer.ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: Session Server.local
    ##     path: /
    ##
    extraHosts: []
    ## @param sessionServer.ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param sessionServer.ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - Session Server.local
    ##   secretName: Session Server.local-tls
    ##
    extraTls: []
    ## @param sessionServer.ingress.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: Session Server.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param sessionServer.ingress.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []

## Prometheus metrics
##
metrics:
  ## @param metrics.enabled Enable the export of Prometheus metrics
  ##
  enabled: false
  ## Service parameters
  ##
  service:
    ## @param metrics.service.type Session Server service type
    ##
    type: ClusterIP
    ## @param metrics.service.ports.metrics Session Server service http port
    ##
    ports:
      metrics: 9252
    ## Node ports to expose
    ## @param metrics.service.nodePorts.metrics Node port for HTTP
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      metrics: ""
    ## @param metrics.service.labels Service labels
    ##
    labels: {}
    ## @param metrics.service.clusterIP Session Server service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param metrics.service.loadBalancerIP Session Server service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param metrics.service.loadBalancerSourceRanges Session Server service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param metrics.service.externalTrafficPolicy Session Server service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param metrics.service.annotations [object] Additional custom annotations for Session Server service
    ##
    annotations: {}
    ## @param metrics.service.extraPorts Extra ports to expose in Session Server service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param metrics.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param metrics.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}
  ## Prometheus Operator ServiceMonitor configuration
  ##
  serviceMonitor:
    ## @param metrics.serviceMonitor.enabled if `true`, creates a Prometheus Operator ServiceMonitor (also requires `metrics.enabled` to be `true`)
    ##
    enabled: false
    ## @param metrics.serviceMonitor.namespace Namespace in which Prometheus is running
    ##
    namespace: ""
    ## @param metrics.serviceMonitor.annotations Additional custom annotations for the ServiceMonitor
    ##
    annotations: {}
    ## @param metrics.serviceMonitor.labels Extra labels for the ServiceMonitor
    ##
    labels: {}
    ## @param metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in Prometheus
    ##
    jobLabel: ""
    ## @param metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
    ##
    honorLabels: false
    ## @param metrics.serviceMonitor.interval Interval at which metrics should be scraped.
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ## e.g:
    ## interval: 10s
    ##
    interval: ""
    ## @param metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ## e.g:
    ## scrapeTimeout: 10s
    ##
    scrapeTimeout: ""
    ## @param metrics.serviceMonitor.metricRelabelings Specify additional relabeling of metrics
    ##
    metricRelabelings: []
    ## @param metrics.serviceMonitor.relabelings Specify general relabeling
    ##
    relabelings: []
    ## @param metrics.serviceMonitor.selector Prometheus instance selector labels
    ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
    ## selector:
    ##   prometheus: my-prometheus
    ##
    selector: {}
