# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
## @param global.storageClass DEPRECATED: use global.defaultStorageClass instead
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  storageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters
##

## @param kubeVersion Force target Kubernetes version (using Helm capabilities if not set)
##
kubeVersion: ""
## @param nameOverride String to partially override gitea.fullname template (will maintain the release name)
##
nameOverride: ""
## @param fullnameOverride String to fully override gitea.fullname template
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""
## @param commonAnnotations Common annotations to add to all Gitea resources (sub-charts are not considered). Evaluated as a template
##
commonAnnotations: {}
## @param commonLabels Common labels to add to all Gitea resources (sub-charts are not considered). Evaluated as a template
##
commonLabels: {}
## @param extraDeploy Array of extra objects to deploy with the release (evaluated as a template).
##
extraDeploy: []
## @param usePasswordFiles Mount credentials as files instead of using environment variables
##
usePasswordFiles: true
## @section Gitea parameters
##

## Bitnami Gitea image version
## ref: https://hub.docker.com/r/bitnami/gitea/tags/
## @param image.registry [default: REGISTRY_NAME] Gitea image registry
## @param image.repository [default: REPOSITORY_NAME/gitea] Gitea Image name
## @skip image.tag Gitea Image tag
## @param image.digest Gitea image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy Gitea image pull policy
## @param image.pullSecrets Specify docker-registry secret names as an array
## @param image.debug Specify if debug logs should be enabled
##
image:
  registry: docker.io
  repository: bitnami/gitea
  tag: 1.24.5-debian-12-r0
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
  ## Set to true if you would like to see extra information on logs
  ##
  debug: false
## @param adminUsername User of the application
## ref: https://github.com/bitnami/containers/tree/main/bitnami/gitea#configuration
##
adminUsername: bn_user
## @param adminPassword Application password
## Defaults to a random 10-character alphanumeric string if not set
## ref: https://github.com/bitnami/containers/tree/main/bitnami/gitea#configuration
##
adminPassword: ""
## @param adminEmail Admin email
## ref: https://github.com/bitnami/containers/tree/main/bitnami/gitea#configuration
##
adminEmail: user@example.com
## @param appName Gitea application name
## ref: https://github.com/bitnami/containers/tree/main/bitnami/gitea#configuration
##
appName: example
## @param runMode Gitea application host
## ref: https://github.com/bitnami/containers/tree/main/bitnami/gitea#configuration
##
runMode: prod
## @param exposeSSH Make the SSH server accesible
##
exposeSSH: true
## @param rootURL UI Root URL (for link generation)
##
rootURL: ""
## @param command Override default container command (useful when using custom images)
##
command: []
## @param args Override default container args (useful when using custom images)
##
args: []
## @param updateStrategy.type Update strategy - only really applicable for deployments with RWO PVs attached
## If replicas = 1, an update can get "stuck", as the previous pod remains attached to the
## PV, and the "incoming" pod can never start. Changing the strategy to "Recreate" will
## terminate the single previous pod, so that the new, incoming pod can attach to the PV
##
updateStrategy:
  type: RollingUpdate
## @param priorityClassName Gitea pods' priorityClassName
##
priorityClassName: ""
## @param schedulerName Name of the k8s scheduler (other than default)
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""
## @param topologySpreadConstraints Topology Spread Constraints for pod assignment
## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
## The value is evaluated as a template
##
topologySpreadConstraints: []
## @param automountServiceAccountToken Mount Service Account token in pod
##
automountServiceAccountToken: false
## @param hostAliases [array] Add deployment host aliases
## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
##
hostAliases: []
## @param extraEnvVars Extra environment variables
## For example:
##
extraEnvVars: []
#  - name: BEARER_AUTH
#    value: true
## @param extraEnvVarsCM ConfigMap containing extra env vars
##
extraEnvVarsCM: ""
## @param extraEnvVarsSecret Secret containing extra env vars (in case of sensitive data)
##
extraEnvVarsSecret: ""
## @param extraVolumes Array of extra volumes to be added to the deployment (evaluated as template). Requires setting `extraVolumeMounts`
##
extraVolumes: []
## @param extraVolumeMounts Array of extra volume mounts to be added to the container (evaluated as template). Normally used with `extraVolumes`.
##
extraVolumeMounts: []
## @param initContainers Add additional init containers to the pod (evaluated as a template)
##
initContainers: []
## Pod Disruption Budget configuration
## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
## @param pdb.create Enable/disable a Pod Disruption Budget creation
## @param pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
## @param pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `pdb.minAvailable` and `pdb.maxUnavailable` are empty.
##
pdb:
  create: true
  minAvailable: ""
  maxUnavailable: ""
## @param sidecars Attach additional containers to the pod (evaluated as a template)
##
sidecars: []
## @param tolerations Tolerations for pod assignment
## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
## @param existingSecret Name of a secret with the application password
##
existingSecret: ""
## @param existingSecretKey Key inside the existing secret containing the password
##
existingSecretKey: "admin-password"
## SMTP mail delivery configuration
## ref: https://github.com/bitnami/containers/tree/main/bitnami/gitea/#smtp-configuration
## @param smtpHost SMTP host
## @param smtpPort SMTP port
## @param smtpUser SMTP user
## @param smtpPassword SMTP password
##
smtpHost: ""
smtpPort: ""
smtpUser: ""
smtpPassword: ""
## @param smtpExistingSecret The name of an existing secret with SMTP credentials
## NOTE: Must contain key `smtp-password`
## NOTE: When it's set, the `smtpPassword` parameter is ignored
##
smtpExistingSecret: ""
## @param containerPorts [object] Container ports
##
containerPorts:
  http: 3000
  ssh: 2222
## @param extraContainerPorts Optionally specify extra list of additional ports for Gitea container(s)
## e.g:
## extraContainerPorts:
##   - name: myservice
##     containerPort: 9090
##
extraContainerPorts: []
## Enable OpenID Configurations
## @param openid.enableSignIn Enable sign in with OpenID
## @param openid.enableSignUp Enable sign up with OpenID
openid:
  enableSignIn: false
  enableSignUp: false
## Enable persistence using Persistent Volume Claims
## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
##
persistence:
  ## @param persistence.enabled Enable persistence using PVC
  ##
  enabled: true
  ## @param persistence.storageClass PVC Storage Class for Gitea volume
  ## If defined, storageClassName: <storageClass>
  ## If set to "-", storageClassName: "", which disables dynamic provisioning
  ## If undefined (the default) or set to null, no storageClassName spec is
  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
  ##   GKE, AWS & OpenStack)
  ##
  storageClass: ""
  ## @param persistence.accessModes PVC Access Mode for Gitea volume
  ## Requires persistence.enabled: true
  ## If defined, PVC must be created manually before volume will be bound
  ##
  accessModes:
    - ReadWriteOnce
  ## @param persistence.size PVC Storage Request for Gitea volume
  ##
  size: 8Gi
  ## @param persistence.dataSource Custom PVC data source
  ##
  dataSource: {}
  ## @param persistence.existingClaim A manually managed Persistent Volume Claim
  ## Requires persistence.enabled: true
  ## If defined, PVC must be created manually before volume will be bound
  ##
  existingClaim: ""
  ## @param persistence.hostPath If defined, the gitea-data volume will mount to the specified hostPath.
  ## Requires persistence.enabled: true
  ## Requires persistence.existingClaim: nil|false
  ## Default: nil.
  ##
  hostPath: ""
  ## @param persistence.annotations Persistent Volume Claim annotations
  ##
  annotations: {}
  ## @param persistence.selector Selector to match an existing Persistent Volume for Gitea data PVC
  ## If set, the PVC can't have a PV dynamically provisioned for it
  ## E.g.
  ## selector:
  ##   matchLabels:
  ##     app: my-app
  ##
  selector: {}
## @param podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAffinityPreset: ""
## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAntiAffinityPreset: soft
## Node affinity preset
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## @param nodeAffinityPreset.key Node label key to match Ignored if `affinity` is set.
## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set.
##
nodeAffinityPreset:
  type: ""
  ## E.g.
  ## key: "kubernetes.io/e2e-az-name"
  ##
  key: ""
  ## E.g.
  ## values:
  ##   - e2e-az1
  ##   - e2e-az2
  ##
  values: []
## @param affinity Affinity for pod assignment
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
## Note: podAffinityPreset, podAntiAffinityPreset, and nodeAffinityPreset will be ignored when it's set
##
affinity: {}
## @param nodeSelector Node labels for pod assignment. Evaluated as a template.
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
##
nodeSelector: {}
## Gitea container's resource requests and limits
## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
## @param resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
##
resourcesPreset: "micro"
## @param resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
## Example:
## resources:
##   requests:
##     cpu: 2
##     memory: 512Mi
##   limits:
##     cpu: 3
##     memory: 1024Mi
##
resources: {}
## Configure Pods Security Context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
## @param podSecurityContext.enabled Enable Gitea pods' Security Context
## @param podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
## @param podSecurityContext.sysctls Set kernel settings using the sysctl interface
## @param podSecurityContext.supplementalGroups Set filesystem extra groups
## @param podSecurityContext.fsGroup Gitea pods' group ID
##
podSecurityContext:
  enabled: true
  fsGroupChangePolicy: Always
  sysctls: []
  supplementalGroups: []
  fsGroup: 1001
## Configure Container Security Context (only main container)
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## @param containerSecurityContext.enabled Enabled containers' Security Context
## @param containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
## @param containerSecurityContext.runAsUser Set containers' Security Context runAsUser
## @param containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
## @param containerSecurityContext.runAsNonRoot Set container's Security Context runAsNonRoot
## @param containerSecurityContext.privileged Set container's Security Context privileged
## @param containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
## @param containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
## @param containerSecurityContext.capabilities.drop List of capabilities to be dropped
## @param containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
##
containerSecurityContext:
  enabled: true
  seLinuxOptions: {}
  runAsUser: 1001
  runAsGroup: 1001
  runAsNonRoot: true
  privileged: false
  readOnlyRootFilesystem: true
  allowPrivilegeEscalation: false
  capabilities:
    drop: ["ALL"]
  seccompProfile:
    type: "RuntimeDefault"
## Configure extra options for startup probe
## Gitea core exposes / to unauthenticated requests, making it a good
## default startup and readiness path. However, that may not always be the
## case. For example, if the image value is overridden to an image containing a
## module that alters that route, or an image that does not auto-install Gitea.
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param startupProbe.enabled Enable startupProbe
## @param startupProbe.path Request path for startupProbe
## @param startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
## @param startupProbe.periodSeconds Period seconds for startupProbe
## @param startupProbe.timeoutSeconds Timeout seconds for startupProbe
## @param startupProbe.failureThreshold Failure threshold for startupProbe
## @param startupProbe.successThreshold Success threshold for startupProbe
##
startupProbe:
  enabled: false
  path: /
  initialDelaySeconds: 600
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 5
  successThreshold: 1
## Configure extra options for liveness probe
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param livenessProbe.enabled Enable livenessProbe
## @param livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
## @param livenessProbe.periodSeconds Period seconds for livenessProbe
## @param livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
## @param livenessProbe.failureThreshold Failure threshold for livenessProbe
## @param livenessProbe.successThreshold Success threshold for livenessProbe
##
livenessProbe:
  enabled: true
  initialDelaySeconds: 600
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 5
  successThreshold: 1
## Configure extra options for readiness probe
## Gitea core exposes / to unauthenticated requests, making it a good
## default startup and readiness path. However, that may not always be the
## case. For example, if the image value is overridden to an image containing a
## module that alters that route, or an image that does not auto-install Gitea.
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param readinessProbe.enabled Enable readinessProbe
## @param readinessProbe.path Request path for readinessProbe
## @param readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
## @param readinessProbe.periodSeconds Period seconds for readinessProbe
## @param readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
## @param readinessProbe.failureThreshold Failure threshold for readinessProbe
## @param readinessProbe.successThreshold Success threshold for readinessProbe
##
readinessProbe:
  enabled: true
  path: /
  initialDelaySeconds: 30
  periodSeconds: 5
  timeoutSeconds: 1
  failureThreshold: 5
  successThreshold: 1
## @param customStartupProbe Override default startup probe
##
customStartupProbe: {}
## @param customLivenessProbe Override default liveness probe
##
customLivenessProbe: {}
## @param customReadinessProbe Override default readiness probe
##
customReadinessProbe: {}
## @param lifecycleHooks LifecycleHook to set additional configuration at startup Evaluated as a template
##
lifecycleHooks: {}
## @param podAnnotations Pod annotations
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}
## @param podLabels Add additional labels to the pod (evaluated as a template)
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
##
podLabels: {}
## @section Traffic Exposure Parameters
##

## Kubernetes configuration. For minikube, set this to NodePort, elsewhere use LoadBalancer
##
service:
  ## @param service.type Kubernetes Service type
  ##
  type: LoadBalancer
  ## @param service.ports.http Service HTTP port
  ## @param service.ports.ssh Service SSH port
  ##
  ports:
    http: 80
    ssh: 22
  ## @param service.loadBalancerSourceRanges Restricts access for LoadBalancer (only with `service.type: LoadBalancer`)
  ## e.g:
  ## loadBalancerSourceRanges:
  ##   - 0.0.0.0/0
  ##
  loadBalancerSourceRanges: []
  ## @param service.loadBalancerIP loadBalancerIP for the Gitea Service (optional, cloud specific)
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
  ##
  loadBalancerIP: ""
  ## @param service.nodePorts [object] Kubernetes node port
  ## nodePorts:
  ##   http: <to set explicitly, choose port between 30000-32767>
  ##   https: <to set explicitly, choose port between 30000-32767>
  ##
  nodePorts:
    http: ""
    ssh: ""
  ## @param service.externalTrafficPolicy Enable client source IP preservation
  ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
  ##
  externalTrafficPolicy: Cluster
  ## @param service.clusterIP Gitea service Cluster IP
  ## e.g.:
  ## clusterIP: None
  ##
  clusterIP: ""
  ## @param service.extraPorts Extra ports to expose (normally used with the `sidecar` value)
  ##
  extraPorts: []
  ## @param service.annotations Additional custom annotations for Gitea service
  ##
  annotations: {}
  ## @param service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
  ## If "ClientIP", consecutive client requests will be directed to the same Pod
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
  ##
  sessionAffinity: None
  ## @param service.sessionAffinityConfig Additional settings for the sessionAffinity
  ## sessionAffinityConfig:
  ##   clientIP:
  ##     timeoutSeconds: 300
  ##
  sessionAffinityConfig: {}

## Network Policy configuration
## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Specifies whether a NetworkPolicy should be created
  ##
  enabled: true
  ## @param networkPolicy.allowExternal Don't require server label for connections
  ## The Policy model to apply. When set to false, only pods with the correct
  ## server label will have network access to the ports server is listening
  ## on. When true, server will accept connections from any source
  ## (with the correct destination port).
  ##
  allowExternal: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}

## Configure the ingress resource that allows you to access the
## Gitea installation. Set up the URL
## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/
##
ingress:
  ## @param ingress.enabled Enable ingress controller resource
  ##
  enabled: false
  ## @param ingress.pathType Ingress Path type
  ##
  pathType: ImplementationSpecific
  ## @param ingress.apiVersion Override API Version (automatically detected if not set)
  ##
  apiVersion: ""
  ## @param ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
  ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
  ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
  ##
  ingressClassName: ""
  ## @param ingress.hostname Default host for the ingress resource
  ##
  hostname: "gitea.local"
  ## @param ingress.path The Path to Gitea. You may need to set this to '/*' in order to use this
  ## with ALB ingress controllers.
  ##
  path: /
  ## @param ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
  ## For a full list of possible ingress annotations, please see
  ## ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/nginx-configuration/annotations.md
  ## Use this parameter to set the required annotations for cert-manager, see
  ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
  ##
  ## e.g:
  ## annotations:
  ##   kubernetes.io/ingress.class: nginx
  ##   cert-manager.io/cluster-issuer: cluster-issuer-name
  ##
  annotations: {}
  ## @param ingress.tls Enable TLS configuration for the hostname defined at ingress.hostname parameter
  ## TLS certificates will be retrieved from a TLS secret with name: {{- printf "%s-tls" .Values.ingress.hostname }}
  ## You can use the ingress.secrets parameter to create this TLS secret or relay on cert-manager to create it
  ##
  tls: false
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param ingress.extraHosts The list of additional hostnames to be covered with this ingress record.
  ## Most likely the hostname above will be enough, but in the event more hosts are needed, this is an array
  ## extraHosts:
  ## - name: gitea.local
  ##   path: /
  ##
  extraHosts: []
  ## @param ingress.extraPaths Any additional arbitrary paths that may need to be added to the ingress under the main host.
  ## For example: The ALB ingress controller requires a special rule for handling SSL redirection.
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param ingress.extraTls The tls configuration for additional hostnames to be covered with this ingress record.
  ## see: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## extraTls:
  ## - hosts:
  ##     - gitea.local
  ##   secretName: gitea.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets If you're providing your own certificates, please use this to add the certificates as secrets
  ## key and certificate should start with -----BEGIN CERTIFICATE----- or
  ## -----BEGIN RSA PRIVATE KEY-----
  ##
  ## name should line up with a tlsSecret set further up
  ## If you're using cert-manager, this is unneeded, as it will create the secret for you if it is not set
  ##
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## Example:
  ## - name: gitea.local-tls
  ##   key:
  ##   certificate:
  ##
  secrets: []
  ## @param ingress.extraRules Additional rules to be covered with this ingress record
  ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
  ## e.g:
  ## extraRules:
  ## - host: example.local
  ##     http:
  ##       path: /
  ##       backend:
  ##         service:
  ##           name: example-svc
  ##           port:
  ##             name: http
  ##
  extraRules: []
## @section Other Parameters
##

## Service account for Gitea to use.
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
##
serviceAccount:
  ## @param serviceAccount.create Enable creation of ServiceAccount for Gitea pod
  ##
  create: true
  ## @param serviceAccount.name The name of the ServiceAccount to use.
  ## If not set and create is true, a name is generated using the common.names.fullname template
  ##
  name: ""
  ## @param serviceAccount.automountServiceAccountToken Allows auto mount of ServiceAccountToken on the serviceAccount created
  ## Can be set to false if pods using this serviceAccount do not need to use K8s API
  ##
  automountServiceAccountToken: false
  ## @param serviceAccount.annotations Additional custom annotations for the ServiceAccount
  ##
  annotations: {}
## @section Database parameters
##

## PostgreSQL chart configuration
## ref: https://github.com/bitnami/charts/blob/main/bitnami/postgresql/values.yaml
## @param postgresql.enabled Switch to enable or disable the PostgreSQL helm chart
## @param postgresql.auth.username Name for a custom user to create
## @param postgresql.auth.password Password for the custom user to create
## @param postgresql.auth.database Name for a custom database to create
## @param postgresql.auth.existingSecret Name of existing secret to use for PostgreSQL credentials
## @param postgresql.architecture PostgreSQL architecture (`standalone` or `replication`)
## @param postgresql.service.ports.postgresql PostgreSQL service port
##
postgresql:
  enabled: true
  auth:
    username: bn_gitea
    password: ""
    database: bitnami_gitea
    existingSecret: ""
  architecture: standalone
  service:
    ports:
      postgresql: 5432
## External PostgreSQL configuration
## All of these values are only used when postgresql.enabled is set to false
## @param externalDatabase.host Database host
## @param externalDatabase.port Database port number
## @param externalDatabase.user Non-root username for JupyterHub
## @param externalDatabase.password Password for the non-root username for JupyterHub
## @param externalDatabase.database JupyterHub database name
## @param externalDatabase.existingSecret Name of an existing secret resource containing the database credentials
## @param externalDatabase.existingSecretPasswordKey Name of an existing secret key containing the database credentials
##
externalDatabase:
  host: ""
  port: 5432
  user: postgres
  database: gitea
  password: ""
  existingSecret: ""
  existingSecretPasswordKey: "db-password"
## @section Volume Permissions parameters
##

## Init containers parameters:
## volumePermissions: Change the owner and group of the persistent volume mountpoint to runAsUser:fsGroup values from the securityContext section.
##
volumePermissions:
  ## @param volumePermissions.enabled Enable init container that changes volume permissions in the data directory (for cases where the default k8s `runAsUser` and `fsUser` values do not work)
  ##
  enabled: false
  ## @param volumePermissions.image.registry [default: REGISTRY_NAME] Init container volume-permissions image registry
  ## @param volumePermissions.image.repository [default: REPOSITORY_NAME/os-shell] Init container volume-permissions image name
  ## @skip volumePermissions.image.tag Init container volume-permissions image tag
  ## @param volumePermissions.image.digest Init container volume-permissions image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param volumePermissions.image.pullPolicy Init container volume-permissions image pull policy
  ## @param volumePermissions.image.pullSecrets Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/os-shell
    tag: 12-debian-12-r50
    digest: ""
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Init containers' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param volumePermissions.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param volumePermissions.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
