# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters

## @param kubeVersion Override Kubernetes version
##
kubeVersion: ""
## @param nameOverride String to partially override common.names.fullname
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride: ""
## @param commonLabels Labels to add to all deployed objects
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}
## @param clusterDomain Kubernetes cluster domain name
##
clusterDomain: cluster.local
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []
## @param usePasswordFiles Mount credentials as files instead of using environment variables
##
usePasswordFiles: true
## Enable diagnostic mode in the deployment
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the deployment
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the deployment
  ##
  args:
    - infinity
## @section Ghost Image parameters

## Bitnami Ghost image
## ref: https://hub.docker.com/r/bitnami/ghost/tags/
## @param image.registry [default: REGISTRY_NAME] Ghost image registry
## @param image.repository [default: REPOSITORY_NAME/ghost] Ghost image repository
## @skip image.tag Ghost image tag (immutable tags are recommended)
## @param image.digest Ghost image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy Ghost image pull policy
## @param image.pullSecrets Ghost image pull secrets
## @param image.debug Enable image debug mode
##
image:
  registry: docker.io
  repository: bitnami/ghost
  tag: 6.0.5-debian-12-r0
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
  ## Enable debug mode
  ##
  debug: false
## @section Ghost Configuration parameters
## Ghost settings based on environment variables
## ref: https://github.com/bitnami/containers/tree/main/bitnami/ghost#configuration

## @param ghostUsername Ghost user name
##
ghostUsername: user
## @param ghostPassword Ghost user password
## Defaults to a random 10-character alphanumeric string if not set
##
ghostPassword: ""
## @param existingSecret Name of existing secret containing Ghost credentials
## NOTE: Must contain key `ghost-password`
## NOTE: When it's set, the `ghostPassword` parameter is ignored
##
existingSecret: ""
## @param ghostEmail Ghost user email
##
ghostEmail: user@example.com
## @param ghostBlogTitle Ghost Blog title
##
ghostBlogTitle: User's Blog
## @param ghostHost Ghost host to create application URLs
##
ghostHost: ""
## @param ghostPath URL sub path where to server the Ghost application
##
ghostPath: /
## @param ghostEnableHttps Configure Ghost to build application URLs using https
##
ghostEnableHttps: false
## SMTP mail delivery configuration
## ref: https://github.com/bitnami/containers/tree/main/bitnami/ghost/#smtp-configuration
## @param smtpHost SMTP server host
## @param smtpPort SMTP server port
## @param smtpUser SMTP username
## @param smtpPassword SMTP user password
## @param smtpService SMTP service
## @param smtpProtocol SMTP protocol (ssl or tls)
##
smtpHost: ""
smtpPort: ""
smtpUser: ""
smtpPassword: ""
smtpService: ""
smtpProtocol: ""
## @param smtpExistingSecret The name of an existing secret with SMTP credentials
## NOTE: Must contain key `smtp-password`
## NOTE: When it's set, the `smtpPassword` parameter is ignored
##
smtpExistingSecret: ""
## @param allowEmptyPassword Allow the container to be started with blank passwords
##
allowEmptyPassword: true
## @param ghostSkipInstall Skip performing the initial bootstrapping for Ghost
##
ghostSkipInstall: false
## @param command Override default container command (useful when using custom images)
##
command: []
## @param args Override default container args (useful when using custom images)
##
args: []
## @param extraEnvVars Array with extra environment variables to add to the Ghost container
## e.g:
## extraEnvVars:
##   - name: FOO
##     value: "bar"
##
extraEnvVars: []
## @param extraEnvVarsCM Name of existing ConfigMap containing extra env vars
##
extraEnvVarsCM: ""
## @param extraEnvVarsSecret Name of existing Secret containing extra env vars
##
extraEnvVarsSecret: ""
## @section Ghost deployment parameters

## @param replicaCount Number of Ghost replicas to deploy
## NOTE: ReadWriteMany PVC(s) are required if replicaCount > 1
##
replicaCount: 1
## @param updateStrategy.type Ghost deployment strategy type
## ref: https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#strategy
## NOTE: Set it to `Recreate` if you use a PV that cannot be mounted on multiple pods
## e.g:
## updateStrategy:
##  type: RollingUpdate
##  rollingUpdate:
##    maxSurge: 25%
##    maxUnavailable: 25%
##
updateStrategy:
  type: RollingUpdate
## @param priorityClassName Ghost pod priority class name
##
priorityClassName: ""
## @param schedulerName Name of the k8s scheduler (other than default)
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""
## @param topologySpreadConstraints Topology Spread Constraints for pod assignment
## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
## The value is evaluated as a template
##
topologySpreadConstraints: []
## @param automountServiceAccountToken Mount Service Account token in pod
##
automountServiceAccountToken: false
## @param hostAliases Ghost pod host aliases
## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
##
hostAliases: []
## @param extraVolumes Optionally specify extra list of additional volumes for Ghost pods
##
extraVolumes: []
## @param extraVolumeMounts Optionally specify extra list of additional volumeMounts for Ghost container(s)
##
extraVolumeMounts: []
## @param sidecars Add additional sidecar containers to the Ghost pod
## e.g:
## sidecars:
##   - name: your-image-name
##     image: your-image
##     imagePullPolicy: Always
##     ports:
##       - name: portname
##         containerPort: 1234
##
sidecars: []
## @param initContainers Add additional init containers to the Ghost pods
## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
## e.g:
## initContainers:
##  - name: your-image-name
##    image: your-image
##    imagePullPolicy: Always
##    ports:
##      - name: portname
##        containerPort: 1234
##
initContainers: []
## Pod Disruption Budget configuration
## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
## @param pdb.create Enable/disable a Pod Disruption Budget creation
## @param pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
## @param pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `pdb.minAvailable` and `pdb.maxUnavailable` are empty.
##
pdb:
  create: true
  minAvailable: ""
  maxUnavailable: ""
## @param lifecycleHooks Add lifecycle hooks to the Ghost deployment
##
lifecycleHooks: {}
## @param podLabels Extra labels for Ghost pods
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
##
podLabels: {}
## @param podAnnotations Annotations for Ghost pods
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}
## @param podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAffinityPreset: ""
## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAntiAffinityPreset: soft
## Node affinity preset
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
##
nodeAffinityPreset:
  ## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ##
  type: ""
  ## @param nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set
  ##
  key: ""
  ## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set
  ## E.g.
  ## values:
  ##   - e2e-az1
  ##   - e2e-az2
  ##
  values: []
## @param affinity Affinity for pod assignment
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
## NOTE: podAffinityPreset, podAntiAffinityPreset, and nodeAffinityPreset will be ignored when it's set
##
affinity: {}
## @param nodeSelector Node labels for pod assignment
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
##
nodeSelector: {}
## @param tolerations Tolerations for pod assignment
## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
## Ghost containers' resource requests and limits
## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
## @param resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
##
resourcesPreset: "micro"
## @param resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
## Example:
## resources:
##   requests:
##     cpu: 2
##     memory: 512Mi
##   limits:
##     cpu: 3
##     memory: 1024Mi
##
resources: {}
## Container ports
## @param containerPorts.http Ghost HTTP container port
## @param containerPorts.https Ghost HTTPS container port
##
containerPorts:
  http: 2368
  https: 2368
## @param extraContainerPorts Optionally specify extra list of additional ports for WordPress container(s)
## e.g:
## extraContainerPorts:
##   - name: myservice
##     containerPort: 9090
##
extraContainerPorts: []
## Configure Pods Security Context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
## @param podSecurityContext.enabled Enabled Ghost pods' Security Context
## @param podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
## @param podSecurityContext.sysctls Set kernel settings using the sysctl interface
## @param podSecurityContext.supplementalGroups Set filesystem extra groups
## @param podSecurityContext.fsGroup Set Ghost pod's Security Context fsGroup
##
podSecurityContext:
  enabled: true
  fsGroupChangePolicy: Always
  sysctls: []
  supplementalGroups: []
  fsGroup: 1001
## Configure Container Security Context (only main container)
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## @param containerSecurityContext.enabled Enabled containers' Security Context
## @param containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
## @param containerSecurityContext.runAsUser Set containers' Security Context runAsUser
## @param containerSecurityContext.runAsGroup Set containers' Security Context runAsGroup
## @param containerSecurityContext.runAsNonRoot Set container's Security Context runAsNonRoot
## @param containerSecurityContext.privileged Set container's Security Context privileged
## @param containerSecurityContext.readOnlyRootFilesystem Set container's Security Context readOnlyRootFilesystem
## @param containerSecurityContext.allowPrivilegeEscalation Set container's Security Context allowPrivilegeEscalation
## @param containerSecurityContext.capabilities.drop List of capabilities to be dropped
## @param containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
containerSecurityContext:
  enabled: true
  seLinuxOptions: {}
  runAsUser: 1001
  runAsGroup: 1001
  runAsNonRoot: true
  privileged: false
  readOnlyRootFilesystem: true
  allowPrivilegeEscalation: false
  capabilities:
    drop: ["ALL"]
  seccompProfile:
    type: "RuntimeDefault"
## Configure extra options for Ghost containers' liveness, readiness and startup probes
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param startupProbe.enabled Enable startupProbe
## @param startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
## @param startupProbe.periodSeconds Period seconds for startupProbe
## @param startupProbe.timeoutSeconds Timeout seconds for startupProbe
## @param startupProbe.failureThreshold Failure threshold for startupProbe
## @param startupProbe.successThreshold Success threshold for startupProbe
##
startupProbe:
  enabled: false
  initialDelaySeconds: 120
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 6
  successThreshold: 1
## @param livenessProbe.enabled Enable livenessProbe
## @param livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
## @param livenessProbe.periodSeconds Period seconds for livenessProbe
## @param livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
## @param livenessProbe.failureThreshold Failure threshold for livenessProbe
## @param livenessProbe.successThreshold Success threshold for livenessProbe
##
livenessProbe:
  enabled: true
  initialDelaySeconds: 120
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 6
  successThreshold: 1
## @param readinessProbe.enabled Enable readinessProbe
## @param readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
## @param readinessProbe.periodSeconds Period seconds for readinessProbe
## @param readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
## @param readinessProbe.failureThreshold Failure threshold for readinessProbe
## @param readinessProbe.successThreshold Success threshold for readinessProbe
##
readinessProbe:
  enabled: true
  initialDelaySeconds: 30
  periodSeconds: 5
  timeoutSeconds: 3
  failureThreshold: 6
  successThreshold: 1
## @param customLivenessProbe Custom livenessProbe that overrides the default one
##
customLivenessProbe: {}
## @param customReadinessProbe Custom readinessProbe that overrides the default one
#
customReadinessProbe: {}
## @section Traffic Exposure Parameters

## Ghost service parameters
##
service:
  ## @param service.type Ghost service type
  ##
  type: LoadBalancer
  ## @param service.ports.http Ghost service HTTP port
  ## @param service.ports.https Ghost service HTTPS port
  ##
  ports:
    http: 80
    https: 443
  ## Node ports to expose
  ## @param service.nodePorts.http Node port for HTTP
  ## @param service.nodePorts.https Node port for HTTPS
  ## NOTE: choose port between <30000-32767>
  ##
  nodePorts:
    http: ""
    https: ""
  ## @param service.clusterIP Ghost service Cluster IP
  ## e.g.:
  ## clusterIP: None
  ##
  clusterIP: ""
  ## @param service.loadBalancerIP Ghost service Load Balancer IP
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
  ##
  loadBalancerIP: ""
  ## @param service.loadBalancerSourceRanges Ghost service Load Balancer sources
  ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
  ## e.g:
  ## loadBalancerSourceRanges:
  ##   - 10.10.10.0/24
  ##
  loadBalancerSourceRanges: []
  ## @param service.externalTrafficPolicy Ghost service external traffic policy
  ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
  ##
  externalTrafficPolicy: Cluster
  ## @param service.annotations Additional custom annotations for Ghost service
  ##
  annotations: {}
  ## @param service.extraPorts Extra port to expose on Ghost service
  ##
  extraPorts: []
  ## @param service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
  ## If "ClientIP", consecutive client requests will be directed to the same Pod
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
  ##
  sessionAffinity: None
  ## @param service.sessionAffinityConfig Additional settings for the sessionAffinity
  ## sessionAffinityConfig:
  ##   clientIP:
  ##     timeoutSeconds: 300
  sessionAffinityConfig: {}
## Configure the ingress resource that allows you to access the Ghost installation
## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/
##
ingress:
  ## @param ingress.enabled Enable ingress record generation for Ghost
  ##
  enabled: false
  ## @param ingress.pathType Ingress path type
  ##
  pathType: ImplementationSpecific
  ## @param ingress.apiVersion Force Ingress API version (automatically detected if not set)
  ##
  apiVersion: ""
  ## @param ingress.hostname Default host for the ingress record
  ##
  hostname: ghost.local
  ## @param ingress.path Default path for the ingress record
  ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
  ##
  path: /
  ## @param ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
  ## For a full list of possible ingress annotations, please see
  ## ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/nginx-configuration/annotations.md
  ## Use this parameter to set the required annotations for cert-manager, see
  ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
  ##
  ## e.g:
  ## annotations:
  ##   kubernetes.io/ingress.class: nginx
  ##   cert-manager.io/cluster-issuer: cluster-issuer-name
  ##
  annotations: {}
  ## @param ingress.tls Enable TLS configuration for the host defined at `ingress.hostname` parameter
  ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.ingress.hostname }}`
  ## You can:
  ##   - Use the `ingress.secrets` parameter to create this TLS secret
  ##   - Rely on cert-manager to create it by setting the corresponding annotations
  ##   - Rely on Helm to create self-signed certificates by setting `ingress.selfSigned=true`
  ##
  tls: false
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
  ## e.g:
  ## extraHosts:
  ##   - name: ghost.local
  ##     path: /
  ##
  extraHosts: []
  ## @param ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
  ## e.g:
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
  ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## e.g:
  ## extraTls:
  ## - hosts:
  ##     - ghost.local
  ##   secretName: ghost.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets Custom TLS certificates as secrets
  ## NOTE: 'key' and 'certificate' are expected in PEM format
  ## NOTE: 'name' should line up with a 'secretName' set further up
  ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
  ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## e.g:
  ## secrets:
  ##   - name: ghost.local-tls
  ##     key: |-
  ##       -----BEGIN RSA PRIVATE KEY-----
  ##       ...
  ##       -----END RSA PRIVATE KEY-----
  ##     certificate: |-
  ##       -----BEGIN CERTIFICATE-----
  ##       ...
  ##       -----END CERTIFICATE-----
  ##
  secrets: []
  ## @param ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
  ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
  ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
  ##
  ingressClassName: ""
  ## @param ingress.extraRules Additional rules to be covered with this ingress record
  ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
  ## e.g:
  ## extraRules:
  ## - host: example.local
  ##     http:
  ##       path: /
  ##       backend:
  ##         service:
  ##           name: example-svc
  ##           port:
  ##             name: http
  ##
  extraRules: []
## @section Persistence Parameters

## Persistence Parameters
## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
##
persistence:
  ## @param persistence.enabled Enable persistence using Persistent Volume Claims
  ##
  enabled: true
  ## @param persistence.storageClass Persistent Volume storage class
  ## If defined, storageClassName: <storageClass>
  ## If set to "-", storageClassName: "", which disables dynamic provisioning
  ## If undefined (the default) or set to null, no storageClassName spec is set, choosing the default provisioner
  ##
  storageClass: ""
  ## @param persistence.annotations Additional custom annotations for the PVC
  ##
  annotations: {}
  ## @param persistence.accessModes [array] Persistent Volume access modes
  ##
  accessModes:
    - ReadWriteOnce
  ## @param persistence.size Persistent Volume size
  ##
  size: 8Gi
  ## @param persistence.existingClaim The name of an existing PVC to use for persistence
  ##
  existingClaim: ""
  ## @param persistence.subPath The name of a volume's sub path to mount for persistence
  ##
  subPath: ""
## 'volumePermissions' init container parameters
## Changes the owner and group of the persistent volume mount point to runAsUser:fsGroup values
##   based on the podSecurityContext/containerSecurityContext parameters
##
volumePermissions:
  ## @param volumePermissions.enabled Enable init container that changes the owner/group of the PV mount point to `runAsUser:fsGroup`
  ##
  enabled: false
  ## OS Shell + Utility image
  ## ref: https://hub.docker.com/r/bitnami/os-shell/tags/
  ## @param volumePermissions.image.registry [default: REGISTRY_NAME] OS Shell + Utility image registry
  ## @param volumePermissions.image.repository [default: REPOSITORY_NAME/os-shell] OS Shell + Utility image repository
  ## @skip volumePermissions.image.tag OS Shell + Utility image tag (immutable tags are recommended)
  ## @param volumePermissions.image.digest OS Shell + Utility image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param volumePermissions.image.pullPolicy OS Shell + Utility image pull policy
  ## @param volumePermissions.image.pullSecrets OS Shell + Utility image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/os-shell
    tag: 12-debian-12-r51
    digest: ""
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Init container's resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param volumePermissions.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "none"
  ## @param volumePermissions.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Init container Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param volumePermissions.securityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param volumePermissions.securityContext.runAsUser Set init container's Security Context runAsUser
  ## NOTE: when runAsUser is set to special value "auto", init container will try to chown the
  ##   data folder to auto-determined user&group, using commands: `id -u`:`id -G | cut -d" " -f2`
  ##   "auto" is especially useful for OpenShift which has scc with dynamic user ids (and 0 is not allowed)
  ##
  securityContext:
    seLinuxOptions: {}
    runAsUser: 0
## @section Database Parameters

## MySQL chart configuration
## ref: https://github.com/bitnami/charts/blob/main/bitnami/mysql/values.yaml
##
mysql:
  ## @param mysql.enabled Deploy a MySQL server to satisfy the applications database requirements
  ## To use an external database set this to false and configure the `externalDatabase.*` parameters
  ##
  enabled: true
  ## @param mysql.architecture MySQL architecture. Allowed values: `standalone` or `replication`
  ##
  architecture: standalone
  ## MySQL Authentication parameters
  ## @param mysql.auth.rootPassword MySQL root password
  ## @param mysql.auth.database MySQL custom database
  ## @param mysql.auth.username MySQL custom user name
  ## @param mysql.auth.password MySQL custom user password
  ## @param mysql.auth.existingSecret Existing secret with MySQL credentials
  ## ref: https://github.com/bitnami/containers/tree/main/bitnami/mysql#setting-the-root-password-on-first-run
  ##      https://github.com/bitnami/containers/tree/main/bitnami/mysql/#creating-a-database-on-first-run
  ##      https://github.com/bitnami/containers/tree/main/bitnami/mysql/#creating-a-database-user-on-first-run
  auth:
    rootPassword: ""
    database: bitnami_ghost
    username: bn_ghost
    password: ""
    existingSecret: ""
  ## MySQL Primary configuration
  ##
  primary:
    ## MySQL Primary Persistence parameters
    ## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
    ## @param mysql.primary.persistence.enabled Enable persistence on MySQL using PVC(s)
    ## @param mysql.primary.persistence.storageClass Persistent Volume storage class
    ## @param mysql.primary.persistence.accessModes [array] Persistent Volume access modes
    ## @param mysql.primary.persistence.size Persistent Volume size
    ##
    persistence:
      enabled: true
      storageClass: ""
      accessModes:
        - ReadWriteOnce
      size: 8Gi
    ## MySQL primary container's resource requests and limits
    ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
    ## We usually recommend not to specify default resources and to leave this as a conscious
    ## choice for the user. This also increases chances charts run on environments with little
    ## resources, such as Minikube. If you do want to specify resources, uncomment the following
    ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    ## @param mysql.primary.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if primary.resources is set (primary.resources is recommended for production).
    ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
    ##
    resourcesPreset: "small"
    ## @param mysql.primary.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
    ## Example:
    ## resources:
    ##   requests:
    ##     cpu: 2
    ##     memory: 512Mi
    ##   limits:
    ##     cpu: 3
    ##     memory: 1024Mi
    ##
    resources: {}
## External Database Configuration
## All of these values are only used if `mysql.enabled=false`
##
externalDatabase:
  ## @param externalDatabase.host External Database server host
  ##
  host: localhost
  ## @param externalDatabase.port External Database server port
  ##
  port: 3306
  ## @param externalDatabase.user External Database username
  ##
  user: bn_ghost
  ## @param externalDatabase.password External Database user password
  ##
  password: ""
  ## @param externalDatabase.database External Database database name
  ##
  database: bitnami_ghost
  ## @param externalDatabase.existingSecret The name of an existing secret with database credentials
  ## NOTE: Must contain key `mysql-password`
  ## NOTE: When it's set, the `externalDatabase.password` parameter is ignored
  ##
  existingSecret: ""
  ## @param externalDatabase.ssl External Database ssl
  ##
  ssl: false
  ## @param externalDatabase.sslCaFile External Database ssl CA filepath
  ##
  sslCaFile: ""
## @section NetworkPolicy parameters

## Network Policy configuration
## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Specifies whether a NetworkPolicy should be created
  ##
  enabled: true
  ## @param networkPolicy.allowExternal Don't require server label for connections
  ## The Policy model to apply. When set to false, only pods with the correct
  ## server label will have network access to the ports server is listening
  ## on. When true, server will accept connections from any source
  ## (with the correct destination port).
  ##
  allowExternal: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}

## Pods Service Account
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
## @param serviceAccount.create Specifies whether a ServiceAccount should be created
## @param serviceAccount.name Name of the service account to use. If not set and create is true, a name is generated using the fullname template.
## @param serviceAccount.automountServiceAccountToken Automount service account token for the server service account
## @param serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
##
serviceAccount:
  create: true
  name: ""
  automountServiceAccountToken: false
  annotations: {}
