## Copyright Broadcom, Inc. All Rights Reserved.
## SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
## @param global.storageClass DEPRECATED: use global.defaultStorageClass instead
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  storageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters
##

## @param kubeVersion Override Kubernetes version
##
kubeVersion: ""
## @param nameOverride String to partially override common.names.fullname
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride: ""
## @param commonLabels Labels to add to all deployed objects
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}
## @param clusterDomain Kubernetes cluster domain name
##
clusterDomain: cluster.local
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []
## Enable diagnostic mode in the deployments/statefulsets
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the deployments/statefulsets
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the deployments/statefulsets
  ##
  args:
    - infinity
## @section Source code parameters

## Bitnami Deepspeed image version
## ref: https://hub.docker.com/r/bitnami/deepspeed/tags/
## @param image.registry [default: REGISTRY_NAME] Deepspeed image registry
## @param image.repository [default: REPOSITORY_NAME/deepspeed] Deepspeed image repository
## @skip image.tag Deepspeed image tag (immutable tags are recommended)
## @param image.digest Deepspeed image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy Deepspeed image pull policy
## @param image.pullSecrets Specify docker-registry secret names as an array
##
image:
  registry: docker.io
  repository: bitnami/deepspeed
  tag: 0.17.5-debian-12-r0
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## Example:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
## Source code parameters
##
source:
  ## @param source.type Where the source comes from: Possible values: configmap, git, custom
  ##
  type: "configmap"
  ## @param source.launchCommand deepspeed command to run over the project
  ##
  launchCommand: ""
  ## @param source.configMap List of files of the project
  ##
  configMap: {}
  ## @param source.existingConfigMap Name of a configmap containing the files of the project
  ##
  existingConfigMap: ""
  git:
    ## @param source.git.repository Repository that holds the files
    ##
    repository: ""
    ## @param source.git.revision Revision from the repository to checkout
    ##
    revision: ""
    ## @param source.git.extraVolumeMounts Add extra volume mounts for the Git container
    ## Useful to mount keys to connect through ssh. (normally used with extraVolumes)
    ## E.g:
    ## extraVolumeMounts:
    ##   - name: ssh-dir
    ##     mountPath: /.ssh/
    ##
    extraVolumeMounts: []
## Configuration parameters
##
config:
  ## @param config.defaultHostFile [string] Host file generated by default (only edit if you know what you are doing)
  ##
  defaultHostFile: |
    {{- $workers := $.Values.worker.replicaCount | int }}
    {{- range $i, $e := until $workers }}
    {{ include "deepspeed.v0.worker.fullname" $ }}-{{ $i }}.{{ printf "%s-headless" (include "deepspeed.v0.worker.fullname" $) }} slots={{ $.Values.worker.slotsPerNode }}
    {{- end }}
  ## @param config.overrideHostFile Override default host file with the content in this value
  ##
  overrideHostFile: ""
  ## @param config.existingHostFileConfigMap Name of a ConfigMap containing the hostfile
  ##
  existingHostFileConfigMap: ""
  ## @param config.defaultSSHClient [string] Default SSH client configuration for the client node (only edit if you know what you are doing)
  ##
  defaultSSHClient: |
    {{- $workers := $.Values.worker.replicaCount | int }}
    {{- range $i, $e := until $workers }}
    Host {{ include "deepspeed.v0.worker.fullname" $ }}-{{ $i }}.{{ printf "%s-headless" (include "deepspeed.v0.worker.fullname" $) }}
      Port {{ $.Values.worker.containerPorts.ssh }}
      IdentityFile /bitnami/ssh/client-private-key/id_rsa
      StrictHostKeyChecking no
    {{- end }}
  ## @param config.overrideSSHClient Override default SSH cliient configuration with the content in this value
  ##
  overrideSSHClient: ""
  ## @param config.existingSSHClientConfigMap Name of a ConfigMap containing the SSH client configuration
  ##
  existingSSHClientConfigMap: ""
  ## @param config.defaultSSHServer [string] Default SSH Server configuration for the worker nodes (only edit if you know what you are doing)
  ##
  defaultSSHServer: |
    Port {{ .Values.worker.containerPorts.ssh }}
    PasswordAuthentication no
    UsePAM no
    PermitUserEnvironment yes
  ## @param config.overrideSSHServer Overidde SSH Server configuration with the content in this value
  ##
  overrideSSHServer: ""
  ## @param config.existingSSHServerConfigMap Name of a ConfigMap with with the SSH Server configuration
  ##
  existingSSHServerConfigMap: ""
  ## @param config.sshPrivateKey Private key for the client node to connect to the worker nodes
  ##
  sshPrivateKey: ""
  ## @param config.existingSSHKeySecret Name of a secret containing the ssh private key
  ##
  existingSSHKeySecret: ""
## @section Client Deployment Parameters
##
client:
  ## @param client.enabled Enable Client deployment
  ##
  enabled: true
  ## @param client.useJob Deploy as job
  ##
  useJob: false
  ## @param client.backoffLimit set backoff limit of the job
  ##
  backoffLimit: 10
  ## @param client.extraEnvVars Array with extra environment variables to add to client nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param client.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for client nodes
  ##
  extraEnvVarsCM: ""
  ## @param client.extraEnvVarsSecret Name of existing Secret containing extra env vars for client nodes
  ##
  extraEnvVarsSecret: ""
  ## @param client.annotations Annotations for the client deployment
  ##
  annotations: {}
  ## @param client.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param client.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param client.terminationGracePeriodSeconds Client termination grace period (in seconds)
  ##
  terminationGracePeriodSeconds: ""
  ## Configure extra options for Client containers' liveness, readiness and startup probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
  ## @param client.livenessProbe.enabled Enable livenessProbe on Client nodes
  ## @param client.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param client.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param client.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param client.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param client.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 30
    timeoutSeconds: 60
    failureThreshold: 5
    successThreshold: 1
  ## @param client.readinessProbe.enabled Enable readinessProbe on Client nodes
  ## @param client.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param client.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param client.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param client.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param client.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 30
    timeoutSeconds: 90
    failureThreshold: 5
    successThreshold: 1
  ## @param client.startupProbe.enabled Enable startupProbe on Client containers
  ## @param client.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param client.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param client.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param client.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param client.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 30
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param client.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param client.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param client.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## client resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param client.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if client.resources is set (client.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "medium"
  ## @param client.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param client.podSecurityContext.enabled Enabled Client pods' Security Context
  ## @param client.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param client.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param client.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param client.podSecurityContext.fsGroup Set Client pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param client.containerSecurityContext.enabled Enabled Client containers' Security Context
  ## @param client.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param client.containerSecurityContext.runAsUser Set Client containers' Security Context runAsUser
  ## @param client.containerSecurityContext.runAsGroup Set Client containers' Security Context runAsGroup
  ## @param client.containerSecurityContext.runAsNonRoot Set Client containers' Security Context runAsNonRoot
  ## @param client.containerSecurityContext.readOnlyRootFilesystem Set Client containers' Security Context runAsNonRoot
  ## @param client.containerSecurityContext.privileged Set Client containers' Security Context privileged
  ## @param client.containerSecurityContext.allowPrivilegeEscalation Set Client container's privilege escalation
  ## @param client.containerSecurityContext.capabilities.drop Set Client container's Security Context runAsNonRoot
  ## @param client.containerSecurityContext.seccompProfile.type Set Client container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
  ## @param client.lifecycleHooks for the client container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param client.runtimeClassName Name of the runtime class to be used by pod(s)
  ## ref: https://kubernetes.io/docs/concepts/containers/runtime-class/
  ##https://github.com/microsoft/DeepSpeedExamples
  runtimeClassName: ""
  ## @param client.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param client.hostAliases client pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param client.labels Extra labels for the client deployment
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  labels: {}
  ## @param client.podLabels Extra labels for client pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param client.podAnnotations Annotations for client pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param client.podAffinityPreset Pod affinity preset. Ignored if `client.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param client.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `client.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node client.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param client.nodeAffinityPreset.type Node affinity preset type. Ignored if `client.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param client.nodeAffinityPreset.key Node label key to match. Ignored if `client.affinity` is set
    ##
    key: ""
    ## @param client.nodeAffinityPreset.values Node label values to match. Ignored if `client.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param client.affinity Affinity for Client pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `client.podAffinityPreset`, `client.podAntiAffinityPreset`, and `client.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param client.nodeSelector Node labels for Client pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param client.tolerations Tolerations for Client pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param client.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param client.priorityClassName Client pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param client.schedulerName Kubernetes pod scheduler registry
  ## https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param client.updateStrategy.type Client statefulset strategy type
  ## @param client.updateStrategy.rollingUpdate Client statefulset rolling update configuration parameters
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    type: RollingUpdate
    rollingUpdate: {}
  ## @param client.extraVolumes Optionally specify extra list of additional volumes for the Client pod(s)
  ##
  extraVolumes: []
  ## @param client.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the Client container(s)
  ##
  extraVolumeMounts: []
  ## @param client.sidecars Add additional sidecar containers to the Client pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param client.enableDefaultInitContainers Deploy default init containers
  ##
  enableDefaultInitContainers: true
  ## @param client.initContainers Add additional init containers to the Client pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## Network Policy configuration
  ## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param client.networkPolicy.enabled Enable creation of NetworkPolicy resources
    ##
    enabled: true
    ## @param client.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param client.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraIngress: []
    ## @param client.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
  ## Service account for Client to use
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
  ##
  serviceAccount:
    ## @param client.serviceAccount.create Enable creation of ServiceAccount for Client pods
    ##
    create: true
    ## @param client.serviceAccount.name The name of the ServiceAccount to use
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param client.serviceAccount.automountServiceAccountToken Allows auto mount of ServiceAccountToken on the serviceAccount created
    ## Can be set to false if pods using this serviceAccount do not need to use K8s API
    ##
    automountServiceAccountToken: false
    ## @param client.serviceAccount.annotations Additional custom annotations for the ServiceAccount
    ##
    annotations: {}
  ## @section Deepspeed Client persistence paramaters
  ## Enable persistence using Persistent Volume Claims
  ## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
  ##
  persistence:
    ## @param client.persistence.enabled Use a PVC to persist data
    ##
    enabled: false
    ## @param client.persistence.storageClass discourse & sidekiq data Persistent Volume Storage Class
    ## If defined, storageClassName: <storageClass>
    ## If set to "-", storageClassName: "", which disables dynamic provisioning
    ## If undefined (the default) or set to null, no storageClassName spec is
    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
    ##   GKE, AWS & OpenStack)
    ##
    storageClass: ""
    ## @param client.persistence.existingClaim Use a existing PVC which must be created manually before bound
    ##
    existingClaim: ""
    ## @param client.persistence.mountPath Path to mount the volume at
    ##
    mountPath: /bitnami/deepspeed/data
    ## @param client.persistence.accessModes Persistent Volume Access Mode
    ##
    accessModes:
      - ReadWriteOnce
    ## @param client.persistence.dataSource Custom PVC data source
    ##
    dataSource: {}
    ## @param client.persistence.selector Selector to match an existing Persistent Volume for the client data PVC
    ## If set, the PVC can't have a PV dynamically provisioned for it
    ## E.g.
    ## selector:
    ##   matchLabels:
    ##     app: my-app
    ##
    selector: {}
    ## @param client.persistence.size Size of data volume
    ##
    size: 8Gi
    ## @param client.persistence.labels Persistent Volume labels
    ##
    labels: {}
    ## @param client.persistence.annotations Persistent Volume annotations
    ##
    annotations: {}
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param client.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param client.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param client.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `client.pdb.minAvailable` and `client.pdb.maxUnavailable` are empty.
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
## @section Worker Deployment Parameters
##
worker:
  ## @param worker.enabled Enable Worker deployment
  ##
  enabled: true
  ## @param worker.slotsPerNode Number of slots available per worker node
  ##
  slotsPerNode: 1
  ## @param worker.extraEnvVars Array with extra environment variables to add to client nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param worker.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for client nodes
  ##
  extraEnvVarsCM: ""
  ## @param worker.extraEnvVarsSecret Name of existing Secret containing extra env vars for client nodes
  ##
  extraEnvVarsSecret: ""
  ## @param worker.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param worker.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param worker.replicaCount Number of Worker replicas to deploy
  ##
  replicaCount: 3
  ## @param worker.terminationGracePeriodSeconds Worker termination grace period (in seconds)
  ##
  terminationGracePeriodSeconds: ""
  ## @param worker.containerPorts.ssh SSH port for Worker
  ##
  containerPorts:
    ssh: 2222
  ## Configure extra options for Worker containers' liveness, readiness and startup probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
  ## @param worker.livenessProbe.enabled Enable livenessProbe on Worker nodes
  ## @param worker.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param worker.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param worker.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param worker.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param worker.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 30
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param worker.readinessProbe.enabled Enable readinessProbe on Worker nodes
  ## @param worker.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param worker.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param worker.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param worker.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param worker.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 5
    periodSeconds: 30
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param worker.startupProbe.enabled Enable startupProbe on Worker containers
  ## @param worker.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param worker.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param worker.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param worker.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param worker.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: false
    initialDelaySeconds: 5
    periodSeconds: 30
    timeoutSeconds: 5
    failureThreshold: 5
    successThreshold: 1
  ## @param worker.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param worker.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## @param worker.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## client resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param worker.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if worker.resources is set (worker.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "medium"
  ## @param worker.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param worker.podSecurityContext.enabled Enabled Worker pods' Security Context
  ## @param worker.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param worker.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param worker.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param worker.podSecurityContext.fsGroup Set Worker pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param worker.containerSecurityContext.enabled Enabled Worker containers' Security Context
  ## @param worker.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param worker.containerSecurityContext.runAsUser Set Worker containers' Security Context runAsUser
  ## @param worker.containerSecurityContext.runAsGroup Set Worker containers' Security Context runAsGroup
  ## @param worker.containerSecurityContext.runAsNonRoot Set Worker containers' Security Context runAsNonRoot
  ## @param worker.containerSecurityContext.readOnlyRootFilesystem Set Worker containers' Security Context runAsNonRoot
  ## @param worker.containerSecurityContext.allowPrivilegeEscalation Set Worker container's privilege escalation
  ## @param worker.containerSecurityContext.capabilities.drop Set Worker container's Security Context runAsNonRoot
  ## @param worker.containerSecurityContext.seccompProfile.type Set Worker container's Security Context seccomp profile
  ## @param worker.containerSecurityContext.privileged Set Worker container's Security Context privileged
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
  ## @param worker.lifecycleHooks for the client container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param worker.runtimeClassName Name of the runtime class to be used by pod(s)
  ## ref: https://kubernetes.io/docs/concepts/containers/runtime-class/
  ##
  runtimeClassName: ""
  ## @param worker.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: false
  ## @param worker.hostAliases client pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param worker.labels Labels for the worker deployment
  ##
  labels: {}
  ## @param worker.annotations Annotations for the worker deployment
  ##
  annotations: {}
  ## @param worker.podLabels Extra labels for client pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param worker.podAnnotations Annotations for client pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param worker.podAffinityPreset Pod affinity preset. Ignored if `client.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##

  podAffinityPreset: ""
  ## @param worker.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `client.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node client.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param worker.nodeAffinityPreset.type Node affinity preset type. Ignored if `client.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param worker.nodeAffinityPreset.key Node label key to match. Ignored if `client.affinity` is set
    ##
    key: ""
    ## @param worker.nodeAffinityPreset.values Node label values to match. Ignored if `client.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param worker.affinity Affinity for Worker pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `worker.podAffinityPreset`, `worker.podAntiAffinityPreset`, and `worker.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param worker.nodeSelector Node labels for Worker pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param worker.tolerations Tolerations for Worker pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param worker.topologySpreadConstraints Topology Spread Constraints for pod assignment spread across your cluster among failure-domains
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param worker.podManagementPolicy Statefulset Pod management policy, it needs to be Parallel to be able to complete the cluster join
  ## Ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#pod-management-policies
  ##
  podManagementPolicy: Parallel
  ## @param worker.priorityClassName Worker pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param worker.schedulerName Kubernetes pod scheduler registry
  ## https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param worker.updateStrategy.type Worker statefulset strategy type
  ## @param worker.updateStrategy.rollingUpdate Worker statefulset rolling update configuration parameters
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    type: RollingUpdate
    rollingUpdate: {}
  ## @param worker.extraVolumes Optionally specify extra list of additional volumes for the Worker pod(s)
  ##
  extraVolumes: []
  ## @param worker.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the Worker container(s)
  ##
  extraVolumeMounts: []
  ## @param worker.sidecars Add additional sidecar containers to the Worker pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param worker.enableDefaultInitContainers Deploy default init containers
  ##
  enableDefaultInitContainers: true
  ## @param worker.initContainers Add additional init containers to the Worker pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## @param worker.headlessServiceAnnotations Annotations for the headless service
  ##
  headlessServiceAnnotations: {}
  ## @section Worker Traffic Exposure Parameters
  ##
  externalAccess:
    ## @param worker.externalAccess.enabled Create a service per worker node
    ##
    enabled: false
    service:
      ## @param worker.externalAccess.service.type Worker service type
      ##
      type: ClusterIP
      ## @param worker.externalAccess.service.loadBalancerIPs Array of load balancer IPs for each Kafka broker. Length must be the same as replicaCount
      ## e.g:
      ## loadBalancerIPs:
      ##   - X.X.X.X
      ##   - Y.Y.Y.Y
      ##
      loadBalancerIPs: []
      ## @param worker.externalAccess.service.externalIPs Use distinct service host IPs to configure Kafka external listener when service type is NodePort. Length must be the same as replicaCount
      ## e.g:
      ## externalIPs:
      ##   - X.X.X.X
      ##   - Y.Y.Y.Y
      ##
      externalIPs: []
      ## @param worker.externalAccess.service.loadBalancerAnnotations Array of load balancer annotations for each Kafka broker. Length must be the same as replicaCount
      ## e.g:
      ## loadBalancerAnnotations:
      ##   - external-dns.alpha.kubernetes.io/hostname: broker1.external.example.com.
      ##   - external-dns.alpha.kubernetes.io/hostname: broker2.external.example.com.
      ##
      loadBalancerAnnotations: []
      ## @param worker.externalAccess.service.publishNotReadyAddresses Indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready
      ## ref: https://kubernetes.io/docs/reference/kubernetes-api/service-resources/service-v1/
      ##
      publishNotReadyAddresses: false
      ## @param worker.externalAccess.service.ports.ssh Worker GRPC service port
      ##
      ports:
        ssh: 22
      ## Node ports to expose
      ## NOTE: choose port between <30000-32767>
      ## @param worker.externalAccess.service.nodePorts Array of node ports used for each Kafka broker. Length must be the same as replicaCount
      ##
      nodePorts: []
      ## @param worker.externalAccess.service.sessionAffinityConfig Additional settings for the sessionAffinity
      ## sessionAffinityConfig:
      ##   clientIP:
      ##     timeoutSeconds: 300
      ##
      sessionAffinityConfig: {}
      ## @param worker.externalAccess.service.sessionAffinity Control where client requests go, to the same pod or round-robin
      ## Values: ClientIP or None
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
      ##
      sessionAffinity: None
      ## @param worker.externalAccess.service.loadBalancerSourceRanges Worker service Load Balancer sources
      ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
      ## e.g:
      ## loadBalancerSourceRanges:
      ##   - 10.10.10.0/24
      ##
      loadBalancerSourceRanges: []
      ## @param worker.externalAccess.service.externalTrafficPolicy Worker service external traffic policy
      ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
      ##
      externalTrafficPolicy: Cluster
      ## @param worker.externalAccess.service.labels Additional custom labels for Worker service
      ##
      labels: {}
      ## @param worker.externalAccess.service.annotations Additional custom annotations for Worker service
      ##
      annotations: {}
      ## @param worker.externalAccess.service.extraPorts Extra ports to expose in the Worker service
      ##
      extraPorts: []
  serviceAccount:
    ## @param worker.serviceAccount.create Enable creation of ServiceAccount for Data Coordinator pods
    ##
    create: true
    ## @param worker.serviceAccount.name The name of the ServiceAccount to use
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param worker.serviceAccount.automountServiceAccountToken Allows auto mount of ServiceAccountToken on the serviceAccount created
    ## Can be set to false if pods using this serviceAccount do not need to use K8s API
    ##
    automountServiceAccountToken: false
    ## @param worker.serviceAccount.annotations Additional custom annotations for the ServiceAccount
    ##
    annotations: {}
  ## Network Policy configuration
  ## ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param worker.networkPolicy.enabled Enable creation of NetworkPolicy resources
    ##
    enabled: true
    ## @param worker.networkPolicy.allowExternal The Policy model to apply
    ## When set to false, only pods with the correct client label will have network access to the ports Deepspeed is
    ## listening on. When true, Deepspeed will accept connections from any source (with the correct destination port).
    ##
    allowExternal: true
    ## @param worker.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param worker.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraIngress: []
    ## @param worker.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param worker.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param worker.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## @section Deepspeed Worker persistence paramaters
  ## Enable persistence using Persistent Volume Claims
  ## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
  ##
  persistence:
    ## @param worker.persistence.enabled Use a PVC to persist data
    ##
    enabled: false
    ## @param worker.persistence.storageClass discourse & sidekiq data Persistent Volume Storage Class
    ## If defined, storageClassName: <storageClass>
    ## If set to "-", storageClassName: "", which disables dynamic provisioning
    ## If undefined (the default) or set to null, no storageClassName spec is
    ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
    ##   GKE, AWS & OpenStack)
    ##
    storageClass: ""
    ## @param worker.persistence.existingClaim Use a existing PVC which must be created manually before bound
    ##
    existingClaim: ""
    ## @param worker.persistence.mountPath Path to mount the volume at
    ##
    mountPath: /bitnami/deepspeed/data
    ## @param worker.persistence.accessModes Persistent Volume Access Mode
    ##
    accessModes:
      - ReadWriteOnce
    ## @param worker.persistence.selector Selector to match an existing Persistent Volume for the worker data PVC
    ## If set, the PVC can't have a PV dynamically provisioned for it
    ## E.g.
    ## selector:
    ##   matchLabels:
    ##     app: my-app
    ##
    selector: {}
    ## @param worker.persistence.dataSource Custom PVC data source
    ##
    dataSource: {}
    ## @param worker.persistence.size Size of data volume
    ##
    size: 8Gi
    ## @param worker.persistence.labels Persistent Volume labels
    ##
    labels: {}
    ## @param worker.persistence.annotations Persistent Volume annotations
    ##
    annotations: {}
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param worker.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param worker.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param worker.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `worker.pdb.minAvailable` and `worker.pdb.maxUnavailable` are empty.
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
## Bitnami git image version
## ref: https://hub.docker.com/r/bitnami/git/tags/
## @param gitImage.registry [default: REGISTRY_NAME] Git image registry
## @param gitImage.repository [default: REPOSITORY_NAME/git] Git image repository
## @skip gitImage.tag Git image tag (immutable tags are recommended)
## @param gitImage.digest Git image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param gitImage.pullPolicy Git image pull policy
## @param gitImage.pullSecrets Specify docker-registry secret names as an array
##
gitImage:
  registry: docker.io
  repository: bitnami/git
  tag: 2.51.0-debian-12-r0
  digest: ""
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## Example:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
## volumePermissions: Change the owner and group of the persistent volume mountpoint to runAsUser:fsGroup values from the securityContext section.
##
volumePermissions:
  ## @param volumePermissions.enabled Enable init container that changes volume permissions in the data directory
  ##
  enabled: false
  ## @param volumePermissions.image.registry [default: REGISTRY_NAME] Init container volume-permissions image registry
  ## @param volumePermissions.image.repository [default: REPOSITORY_NAME/os-shell] Init container volume-permissions image repository
  ## @skip volumePermissions.image.tag Init container volume-permissions image tag (immutable tags are recommended)
  ## @param volumePermissions.image.digest Init container volume-permissions image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param volumePermissions.image.pullPolicy Init container volume-permissions image pull policy
  ## @param volumePermissions.image.pullSecrets Specify docker-registry secret names as an array
  ##
  image:
    registry: docker.io
    repository: bitnami/os-shell
    tag: 12-debian-12-r51
    digest: ""
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Init container' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## We usually recommend not to specify default resources and to leave this as a conscious
  ## choice for the user. This also increases chances charts run on environments with little
  ## resources, such as Minikube. If you do want to specify resources, uncomment the following
  ## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  ## @param volumePermissions.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param volumePermissions.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
