# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass
##

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
## @param global.defaultStorageClass Global default StorageClass for Persistent Volume(s)
## @param global.storageClass DEPRECATED: use global.defaultStorageClass instead
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  defaultStorageClass: ""
  storageClass: ""
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false
  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto
## @section Common parameters
##

## @param kubeVersion Override Kubernetes version
##
kubeVersion: ""
## @param nameOverride String to partially override common.names.fullname
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride: ""
## @param commonLabels Labels to add to all deployed objects (sub-charts are not considered)
##
commonLabels: {}
## @param commonAnnotations Annotations to add to all deployed objects (sub-charts are not considered)
##
commonAnnotations: {}
## @param clusterDomain Kubernetes cluster domain name
##
clusterDomain: cluster.local
## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []
## Enable diagnostic mode in the deployment
##
diagnosticMode:
  ## @param diagnosticMode.enabled Enable diagnostic mode (all probes will be disabled and the command will be overridden)
  ##
  enabled: false
  ## @param diagnosticMode.command Command to override all containers in the deployment
  ##
  command:
    - sleep
  ## @param diagnosticMode.args Args to override all containers in the deployment
  ##
  args:
    - infinity
## @section HashiCorp Consul parameters
##

## Bitnami HashiCorp Consul image
## ref: https://hub.docker.com/r/bitnami/consul/tags/
## @param image.registry [default: REGISTRY_NAME] HashiCorp Consul image registry
## @param image.repository [default: REPOSITORY_NAME/consul] HashiCorp Consul image repository
## @skip image.tag HashiCorp Consul image tag (immutable tags are recommended)
## @param image.digest HashiCorp Consul image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
## @param image.pullPolicy HashiCorp Consul image pull policy
## @param image.pullSecrets HashiCorp Consul image pull secrets
## @param image.debug Enable image debug mode
##
image:
  registry: docker.io
  repository: bitnami/consul
  tag: 1.21.4-debian-12-r1
  digest: ""
  ## Specify a imagePullPolicy
  ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets.
  ## Secrets must be manually created in the namespace.
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## e.g:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []
  ## Enable debug mode
  ##
  debug: false
## @param datacenterName Datacenter name for Consul. If not supplied, will use the Consul
##
datacenterName: dc1
## @param domain Consul domain name
##
domain: consul
## @param raftMultiplier Multiplier used to scale key Raft timing parameters
##
raftMultiplier: "1"
## @param gossipKey Gossip key for all members. The key must be base64-encoded, can be generated with $(consul keygen)
## Example:
## gossipKey: "DVoLa/k99hfBEdIfCLkzSpWg4obElLYVIFDsutKCL/w="
##
gossipKey: ""
## @param tlsEncryptionSecretName Name of existing secret with TLS encryption data
## Use TLS to verify the authenticity of servers and clients.
## Check README for more information.
## Example:
## tlsEncryptionSecretName: your-already-created-secret
##
tlsEncryptionSecretName: ""
## @param automountServiceAccountToken Mount Service Account token in pod
##
automountServiceAccountToken: false
## @param hostAliases Deployment pod host aliases
## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
##
hostAliases: []
## @param configuration HashiCorp Consul configuration to be injected as ConfigMap
## Example:
## configuration: |-
##   {
##   "datacenter":"dc2",
##   "domain":"consul",
##   "data_dir":"/opt/bitnami/consul/data",
##   "pid_file":"/opt/bitnami/consul/tmp/consul.pid",
##   "server":true,
##   "ui":false,
##   "bootstrap_expect":3,
##   "addresses": {
##       "http":"0.0.0.0"
##   },
##   "ports": {
##       "http":8500,
##       "dns":8600,
##       "serf_lan":8301,
##       "server":8300
##   },
##   "serf_lan":"0.0.0.0"
##   }
##
configuration: ""
## @param existingConfigmap ConfigMap with HashiCorp Consul configuration
##
existingConfigmap: ""
## @param localConfig Extra configuration that will be added to the default one
## Example:
## localConfig: |-
##   {
##     "key": "value"
##   }
##
localConfig: ""
## @param podLabels Pod labels
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
##
podLabels: {}
## @param priorityClassName Priority class assigned to the Pods
##
priorityClassName: ""
## @param runtimeClassName Name of the runtime class to be used by pod(s)
## ref: https://kubernetes.io/docs/concepts/containers/runtime-class/
##
runtimeClassName: ""
## @param schedulerName Alternative scheduler
## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
##
schedulerName: ""
## @param terminationGracePeriodSeconds In seconds, time the given to the Consul pod needs to terminate gracefully
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
##
terminationGracePeriodSeconds: ""
## @param topologySpreadConstraints Topology Spread Constraints for pod assignment
## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
## The value is evaluated as a template
##
topologySpreadConstraints: []
## @param command Command for running the container (set to default if not set). Use array form
##
command: []
## @param args Args for running the container (set to default if not set). Use array form
##
args: []
## @param extraEnvVars Extra environment variables to be set on HashiCorp Consul container
## For example:
##
extraEnvVars: []
#  - name: FOO
#    value: BAR
## @param extraEnvVarsCM Name of existing ConfigMap containing extra env vars
##
extraEnvVarsCM: ""
## @param extraEnvVarsSecret Name of existing Secret containing extra env vars
##
extraEnvVarsSecret: ""
## HashiCorp Consul container ports to open
## @param containerPorts.http Port to open for HTTP in Consul
## @param containerPorts.dns Port to open for DNS server in Consul
## @param containerPorts.rpc Port to open for RPC in Consul
## @param containerPorts.rpcServer Port to open for RPC Server in Consul
## @param containerPorts.serfLAN Port to open for Serf LAN in Consul
## @param containerPorts.serfWAN Port to open for Serf WAN in Consul
##
containerPorts:
  http: 8500
  dns: 8600
  rpc: 8400
  rpcServer: 8300
  serfLAN: 8301
  serfWAN: 8302
## @param lifecycleHooks Add lifecycle hooks to the deployment
##
lifecycleHooks: {}
## @section Statefulset parameters
##

## @param replicaCount Number of HashiCorp Consul replicas to deploy
##
replicaCount: 3
## @param updateStrategy.type Update strategy type for the HashiCorp Consul statefulset
## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
##
updateStrategy:
  type: RollingUpdate
## @param podManagementPolicy StatefulSet pod management policy
##
podManagementPolicy: Parallel
## @param podAnnotations Additional pod annotations
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}
## @param podAffinityPreset Pod affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAffinityPreset: ""
## @param podAntiAffinityPreset Pod anti-affinity preset. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
##
podAntiAffinityPreset: soft
## Node affinity preset
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
##
nodeAffinityPreset:
  ## @param nodeAffinityPreset.type Node affinity preset type. Ignored if `affinity` is set. Allowed values: `soft` or `hard`
  ##
  type: ""
  ## @param nodeAffinityPreset.key Node label key to match. Ignored if `affinity` is set.
  ## E.g.
  ## key: "kubernetes.io/e2e-az-name"
  ##
  key: ""
  ## @param nodeAffinityPreset.values Node label values to match. Ignored if `affinity` is set.
  ## E.g.
  ## values:
  ##   - e2e-az1
  ##   - e2e-az2
  ##
  values: []
## @param affinity Affinity for pod assignment
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
## Note: podAffinityPreset, podAntiAffinityPreset, and  nodeAffinityPreset will be ignored when it's set
##
affinity: {}
## @param nodeSelector Node labels for pod assignment
## Ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
##
nodeSelector: {}
## @param tolerations Tolerations for pod assignment
## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []
## Pod security context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
## @param podSecurityContext.enabled Enable security context for HashiCorp Consul pods
## @param podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
## @param podSecurityContext.sysctls Set kernel settings using the sysctl interface
## @param podSecurityContext.supplementalGroups Set filesystem extra groups
## @param podSecurityContext.fsGroup Group ID for the volumes of the pod
##
podSecurityContext:
  enabled: true
  fsGroupChangePolicy: Always
  sysctls: []
  supplementalGroups: []
  fsGroup: 1001
## Container security context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## @param containerSecurityContext.enabled Enabled Consul containers' Security Context
## @param containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
## @param containerSecurityContext.runAsUser Set Consul containers' Security Context runAsUser
## @param containerSecurityContext.runAsGroup Set Consul containers' Security Context runAsGroup
## @param containerSecurityContext.allowPrivilegeEscalation Set Consul containers' Security Context allowPrivilegeEscalation
## @param containerSecurityContext.capabilities.drop Set containers' repo server Security Context capabilities to be dropped
## @param containerSecurityContext.readOnlyRootFilesystem Set containers' repo server Security Context readOnlyRootFilesystem
## @param containerSecurityContext.runAsNonRoot Set Consul containers' Security Context runAsNonRoot
## @param containerSecurityContext.privileged Set container's Security Context privileged
## @param containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
##
containerSecurityContext:
  enabled: true
  seLinuxOptions: {}
  runAsUser: 1001
  runAsGroup: 1001
  runAsNonRoot: true
  privileged: false
  allowPrivilegeEscalation: false
  capabilities:
    drop: ["ALL"]
  seccompProfile:
    type: "RuntimeDefault"
  readOnlyRootFilesystem: true
## Container's resource requests and limits
## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
## We usually recommend not to specify default resources and to leave this as a conscious
## choice for the user. This also increases chances charts run on environments with little
## resources, such as Minikube. If you do want to specify resources, uncomment the following
## lines, adjust them as necessary, and remove the curly braces after 'resources:'.
## @param resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if resources is set (resources is recommended for production).
## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
##
resourcesPreset: "nano"
## @param resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
## Example:
## resources:
##   requests:
##     cpu: 2
##     memory: 512Mi
##   limits:
##     cpu: 3
##     memory: 1024Mi
##
resources: {}
## Configure extra options for HashiCorp Consul containers' liveness and readiness probes
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
## @param livenessProbe.enabled Enable livenessProbe
## @param livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
## @param livenessProbe.periodSeconds Period seconds for livenessProbe
## @param livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
## @param livenessProbe.failureThreshold Failure threshold for livenessProbe
## @param livenessProbe.successThreshold Success threshold for livenessProbe
##
livenessProbe:
  enabled: true
  initialDelaySeconds: 30
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 6
  successThreshold: 1
## @param readinessProbe.enabled Enable readinessProbe
## @param readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
## @param readinessProbe.periodSeconds Period seconds for readinessProbe
## @param readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
## @param readinessProbe.failureThreshold Failure threshold for readinessProbe
## @param readinessProbe.successThreshold Success threshold for readinessProbe
##
readinessProbe:
  enabled: true
  initialDelaySeconds: 5
  periodSeconds: 10
  timeoutSeconds: 5
  failureThreshold: 6
  successThreshold: 1
## Configure extra options for startup probe
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-startup-probes/#configure-probes
## @param startupProbe.enabled Enable startupProbe
## @param startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
## @param startupProbe.periodSeconds Period seconds for startupProbe
## @param startupProbe.timeoutSeconds Timeout seconds for startupProbe
## @param startupProbe.failureThreshold Failure threshold for startupProbe
## @param startupProbe.successThreshold Success threshold for startupProbe
##
startupProbe:
  enabled: false
  initialDelaySeconds: 0
  periodSeconds: 10
  timeoutSeconds: 5
  successThreshold: 1
  failureThreshold: 60
## @param customLivenessProbe Override default liveness probe
##
customLivenessProbe: {}
## @param customReadinessProbe Override default readiness probe
##
customReadinessProbe: {}
## @param customStartupProbe Override default startup probe
##
customStartupProbe: {}
## @param extraVolumeMounts Optionally specify extra list of additional volumeMounts for Hashicorp Consul container
##
extraVolumeMounts: []
## @param extraVolumes Optionally specify extra list of additional volumes for Hashicorp Consul container
##
extraVolumes: []
## @param initContainers Add additional init containers to the Hashicorp Consul pods
##
initContainers: []
## @param sidecars Add additional sidecar containers to the Hashicorp Consul pods
##
sidecars: []
## HashiCorp Consul Pod Disruption Budget configuration
## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
##
pdb:
  ## @param pdb.create Enable/disable a Pod Disruption Budget creation
  ##
  create: true
  ## @param pdb.minAvailable Minimum number of pods that must still be available after the eviction
  ##
  minAvailable: ""
  ## @param pdb.maxUnavailable Max number of pods that can be unavailable after the eviction
  ##
  maxUnavailable: ""
## Service Account
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
##
serviceAccount:
  ## @param serviceAccount.create Enable creation of ServiceAccount for HashiCorp Consul pod
  ##
  create: true
  ## @param serviceAccount.name The name of the ServiceAccount to use.
  ## If not set and create is true, a name is generated using the common.names.fullname template
  ##
  name: ""
  ## @param serviceAccount.automountServiceAccountToken Allows auto mount of ServiceAccountToken on the serviceAccount created
  ## Can be set to false if pods using this serviceAccount do not need to use K8s API
  ##
  automountServiceAccountToken: false
  ## @param serviceAccount.annotations Additional custom annotations for the ServiceAccount
  ##
  annotations: {}
## @section Exposure parameters
##

## HashiCorp Consul UI service parameters
##
service:
  ## @param service.enabled Use a service to access HashiCorp Consul Ui
  ##
  enabled: true
  ## @param service.ports.http HashiCorp Consul UI svc port
  ##
  ports:
    http: 80
  ## @param service.type HashiCorp Consul UI Service Type
  ##
  type: ClusterIP
  ## Specify the nodePort value for the LoadBalancer and NodePort service types.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
  ## @param service.nodePorts.http Node port for HashiCorp Consul UI
  ##
  nodePorts:
    http: ""
  ## @param service.clusterIP Consul service Cluster IP
  ## e.g.:
  ## clusterIP: None
  ##
  clusterIP: ""
  ## @param service.loadBalancerIP HashiCorp Consul UI service Load Balancer IP
  ## Set the LoadBalancer service type to internal only.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
  ##
  loadBalancerIP: ""
  ## @param service.loadBalancerSourceRanges Consul service Load Balancer sources
  ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
  ## e.g:
  ## loadBalancerSourceRanges:
  ##   - 10.10.10.0/24
  ##
  loadBalancerSourceRanges: []
  ## Provide any additional annotations which may be required. This can be used to
  ## set the LoadBalancer service type to internal only.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
  ## @param service.annotations Annotations for HashiCorp Consul UI service
  ##
  annotations: {}
  ## @param service.externalTrafficPolicy Service external traffic policy
  ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
  ##
  externalTrafficPolicy: Cluster
  ## @param service.extraPorts Extra ports to expose (normally used with the `sidecar` value)
  ##
  extraPorts: []
  ## @param service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
  ## If "ClientIP", consecutive client requests will be directed to the same Pod
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
  ##
  sessionAffinity: None
  ## @param service.sessionAffinityConfig Additional settings for the sessionAffinity
  ## sessionAffinityConfig:
  ##   clientIP:
  ##     timeoutSeconds: 300
  ##
  sessionAffinityConfig: {}
  ## Headless service properties
  ##
  headless:
    ## @param service.headless.annotations Annotations for the headless service.
    ##
    annotations: {}
## Network Policies
## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
##
networkPolicy:
  ## @param networkPolicy.enabled Specifies whether a NetworkPolicy should be created
  ##
  enabled: true
  ## @param networkPolicy.allowExternal Don't require server label for connections
  ## The Policy model to apply. When set to false, only pods with the correct
  ## server label will have network access to the ports server is listening
  ## on. When true, server will accept connections from any source
  ## (with the correct destination port).
  ##
  allowExternal: true
  ## @param networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
  ##
  allowExternalEgress: true
  ## @param networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
  ## e.g:
  ## extraIngress:
  ##   - ports:
  ##       - port: 1234
  ##     from:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  extraIngress: []
  ## @param networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)
  ## e.g:
  ## extraEgress:
  ##   - ports:
  ##       - port: 1234
  ##     to:
  ##       - podSelector:
  ##           - matchLabels:
  ##               - role: frontend
  ##       - podSelector:
  ##           - matchExpressions:
  ##               - key: role
  ##                 operator: In
  ##                 values:
  ##                   - frontend
  ##
  extraEgress: []
  ## @param networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
  ## @param networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
  ##
  ingressNSMatchLabels: {}
  ingressNSPodMatchLabels: {}
## Configure the ingress resource that allows you to access the Consul UI
## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/
##
ingress:
  ## @param ingress.enabled Enable ingress resource for Management console
  ##
  enabled: false
  ## @param ingress.path Path for the default host
  ##
  path: /
  ## @param ingress.apiVersion Override API Version (automatically detected if not set)
  ##
  apiVersion: ""
  ## @param ingress.pathType Ingress path type
  ##
  pathType: ImplementationSpecific
  ## DEPRECATED: Use ingress.annotations instead of ingress.certManager
  ## certManager: false
  ##

  ## @param ingress.hostname Default host for the ingress resource, a host pointing to this will be created
  ##
  hostname: consul-ui.local
  ## @param ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
  ## For a full list of possible ingress annotations, please see
  ## ref: https://github.com/kubernetes/ingress-nginx/blob/main/docs/user-guide/nginx-configuration/annotations.md
  ## Use this parameter to set the required annotations for cert-manager, see
  ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
  ##
  ## e.g:
  ## annotations:
  ##   kubernetes.io/ingress.class: nginx
  ##   cert-manager.io/cluster-issuer: cluster-issuer-name
  ##
  annotations: {}
  ## @param ingress.ingressClassName Set the ingerssClassName on the ingress record for k8s 1.18+
  ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
  ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
  ##
  ingressClassName: ""
  ## @param ingress.tls Enable TLS configuration for the hostname defined at ingress.hostname parameter
  ## TLS certificates will be retrieved from a TLS secret with name: {{- printf "%s-tls" .Values.ingress.hostname | trunc 63 | trimSuffix "-" }}
  ## or a custom one if you use the tls.existingSecret parameter
  ## You can use the ingress.secrets parameter to create this TLS secret or relay on cert-manager to create it
  ## Example:
  ## existingSecret: name-of-existing-secret
  ##
  tls: false
  ## @param ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
  ## Most likely the hostname above will be enough, but in the event more hosts are needed, this is an array
  ## extraHosts:
  ## - name: consul-ui.local
  ##   path: /
  ##
  extraHosts: []
  ## @param ingress.extraPaths Any additional arbitrary paths that may need to be added to the ingress under the main host.
  ## For example: The ALB ingress controller requires a special rule for handling SSL redirection.
  ## extraPaths:
  ## - path: /*
  ##   backend:
  ##     serviceName: ssl-redirect
  ##     servicePort: use-annotation
  ##
  extraPaths: []
  ## @param ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
  ##
  selfSigned: false
  ## @param ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
  ## see: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
  ## extraTls:
  ## - hosts:
  ##     - consul-ui.local
  ##   secretName: rconsul-ui.local-tls
  ##
  extraTls: []
  ## @param ingress.secrets If you're providing your own certificates, please use this to add the certificates as secrets
  ## key and certificate should start with -----BEGIN CERTIFICATE----- or
  ## -----BEGIN RSA PRIVATE KEY-----
  ##
  ## name should line up with a tlsSecret set further up
  ## If you're using cert-manager, this is unneeded, as it will create the secret for you if it is not set
  ##
  ## It is also possible to create and manage the certificates outside of this helm chart
  ## Please see README.md for more information
  ## Example:
  ## - name: consul-ui.local-tls
  ##   key:
  ##   certificate:
  ##
  secrets: []
  ## @param ingress.existingSecret It is you own the certificate as secret.
  existingSecret: ""
  ## @param ingress.extraRules Additional rules to be covered with this ingress record
  ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
  ## e.g:
  ## extraRules:
  ## - host: example.local
  ##     http:
  ##       path: /
  ##       backend:
  ##         service:
  ##           name: example-svc
  ##           port:
  ##             name: http
  ##
  extraRules: []
## @section Persistence parameters
##

## Enable persistence using Persistent Volume Claims
## ref: https://kubernetes.io/docs/concepts/storage/persistent-volumes/
##
persistence:
  ## @param persistence.enabled Enable HashiCorp Consul data persistence using PVC, use a Persistent Volume Claim, If false, use emptyDir
  ##
  enabled: true
  ## @param persistence.storageClass Persistent Volume storage class
  ## If defined, storageClassName: <storageClass>
  ## If set to "-", storageClassName: "", which disables dynamic provisioning
  ## If undefined (the default) or set to null, no storageClassName spec is
  ##   set, choosing the default provisioner.  (gp2 on AWS, standard on
  ##   GKE, AWS & OpenStack)
  ##
  storageClass: ""
  ## @param persistence.annotations Persistent Volume Claim annotations
  ##
  annotations: {}
  ## @param persistence.accessModes Persistent Volume Access Mode
  ##
  accessModes:
    - ReadWriteOnce
  ## @param persistence.size PVC Storage Request for HashiCorp Consul data volume
  ##
  size: 8Gi
## @section Volume Permissions parameters
##

## Init containers parameters:
## volumePermissions: Change the owner and group of the persistent volume mountpoint to runAsUser:fsGroup values from the podSecurityContext section.
##
volumePermissions:
  ## @param volumePermissions.enabled Enable init container that changes the owner and group of the persistent volume
  ##
  enabled: false
  ## OS Shell + Utility image
  ## ref: https://hub.docker.com/r/bitnami/os-shell/tags/
  ## @param volumePermissions.image.registry [default: REGISTRY_NAME] OS Shell + Utility image registry
  ## @param volumePermissions.image.repository [default: REPOSITORY_NAME/os-shell] OS Shell + Utility image repository
  ## @skip volumePermissions.image.tag OS Shell + Utility image tag (immutable tags are recommended)
  ## @param volumePermissions.image.digest OS Shell + Utility image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param volumePermissions.image.pullPolicy OS Shell + Utility image pull policy
  ## @param volumePermissions.image.pullSecrets OS Shell + Utility image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/os-shell
    tag: 12-debian-12-r50
    digest: ""
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Init container' resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param volumePermissions.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param volumePermissions.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
## @section Metrics parameters
##

## Prometheus Exporter / Metrics
##
metrics:
  ## @param metrics.enabled Start a side-car prometheus exporter
  ##
  enabled: false
  ## Bitnami HashiCorp Consul Prometheus Exporter image
  ## ref: https://hub.docker.com/r/bitnami/consul-exporter/tags/
  ## @param metrics.image.registry [default: REGISTRY_NAME] HashiCorp Consul Prometheus Exporter image registry
  ## @param metrics.image.repository [default: REPOSITORY_NAME/consul-exporter] HashiCorp Consul Prometheus Exporter image repository
  ## @skip metrics.image.tag HashiCorp Consul Prometheus Exporter image tag (immutable tags are recommended)
  ## @param metrics.image.digest HashiCorp Consul Prometheus Exporter image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param metrics.image.pullPolicy HashiCorp Consul Prometheus Exporter image pull policy
  ## @param metrics.image.pullSecrets HashiCorp Consul Prometheus Exporter image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/consul-exporter
    tag: 0.13.0-debian-12-r29
    digest: ""
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Container security context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param metrics.containerSecurityContext.enabled Enabled Consul containers' Security Context
  ## @param metrics.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param metrics.containerSecurityContext.runAsUser Set Consul containers' Security Context runAsUser
  ## @param metrics.containerSecurityContext.runAsGroup Set Consul containers' Security Context runAsGroup
  ## @param metrics.containerSecurityContext.allowPrivilegeEscalation Set Consul containers' Security Context allowPrivilegeEscalation
  ## @param metrics.containerSecurityContext.capabilities.drop Set containers' repo server Security Context capabilities to be dropped
  ## @param metrics.containerSecurityContext.readOnlyRootFilesystem Set containers' repo server Security Context readOnlyRootFilesystem
  ## @param metrics.containerSecurityContext.runAsNonRoot Set Consul containers' Security Context runAsNonRoot
  ## @param metrics.containerSecurityContext.privileged Set container's Security Context privileged
  ## @param metrics.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    privileged: false
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
    readOnlyRootFilesystem: true
  ## Consul Prometheus exporter service type
  ##
  service:
    ## @param metrics.service.type Kubernetes Service type
    ##
    type: ClusterIP
    ## @param metrics.service.loadBalancerIP Service Load Balancer IP
    ## Use serviceLoadBalancerIP to request a specific static IP, otherwise leave blank
    ##
    loadBalancerIP: ""
    ## @param metrics.service.annotations [object] Provide any additional annotations which may be required.
    ## This can be used to set the LoadBalancer service type to internal only.
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
    ##
    annotations:
      prometheus.io/scrape: "true"
      prometheus.io/port: "9107"
  ## @param metrics.podAnnotations [object] Metrics exporter pod Annotation and Labels
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations:
    prometheus.io/scrape: "true"
    prometheus.io/port: "9107"
  ## HashiCorp Consul Prometheus exporter resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param metrics.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if metrics.resources is set (metrics.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param metrics.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Prometheus Service Monitor
  ## ref: https://github.com/coreos/prometheus-operator
  ##
  serviceMonitor:
    ## @param metrics.serviceMonitor.enabled Create ServiceMonitor Resource for scraping metrics using PrometheusOperator, set to true to create a Service Monitor Entry
    ##
    enabled: false
    ## @param metrics.serviceMonitor.namespace The namespace in which the ServiceMonitor will be created
    ##
    namespace: ""
    ## @param metrics.serviceMonitor.interval Interval at which metrics should be scraped
    ##
    interval: 30s
    ## @param metrics.serviceMonitor.scrapeTimeout The timeout after which the scrape is ended
    ##
    scrapeTimeout: ""
    ## @param metrics.serviceMonitor.metricRelabelings Metrics relabelings to add to the scrape endpoint
    ##
    metricRelabelings: []
    ## @param metrics.serviceMonitor.relabelings RelabelConfigs to apply to samples before scraping
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#relabelconfig
    ##
    relabelings: []
    ## @param metrics.serviceMonitor.honorLabels Specify honorLabels parameter to add the scrape endpoint
    ##
    honorLabels: false
    ## @param metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in prometheus.
    ##
    jobLabel: ""
    ## @param metrics.serviceMonitor.selector ServiceMonitor selector labels
    ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
    ##
    ## selector:
    ##   prometheus: my-prometheus
    ##
    selector: {}
    ## DEPRECATED: metrics.serviceMonitor.additionalLabels will be removed in a future release, plese use metrics.serviceMonitor.labels instead
    ## @param metrics.serviceMonitor.labels Used to pass Labels that are used by the Prometheus installed in your cluster to select Service Monitors to work with
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#prometheusspec
    ##
    labels: {}
