# Copyright Broadcom, Inc. All Rights Reserved.
# SPDX-License-Identifier: APACHE-2.0

## Default values for Chainloop Helm Chart

## @section Global parameters
## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry, imagePullSecrets and storageClass

## @param global.imageRegistry Global Docker image registry
## @param global.imagePullSecrets Global Docker registry secret names as an array
##
global:
  imageRegistry: ""
  ## E.g.
  ## imagePullSecrets:
  ##   - myRegistryKeySecretName
  ##
  imagePullSecrets: []
  ## Security parameters
  ##
  security:
    ## @param global.security.allowInsecureImages Allows skipping image verification
    allowInsecureImages: false

  ## Compatibility adaptations for Kubernetes platforms
  ##
  compatibility:
    ## Compatibility adaptations for Openshift
    ##
    openshift:
      ## @param global.compatibility.openshift.adaptSecurityContext Adapt the securityContext sections of the deployment to make them compatible with Openshift restricted-v2 SCC: remove runAsUser, runAsGroup and fsGroup and let the platform use their allowed default IDs. Possible values: auto (apply if the detected running cluster is Openshift), force (perform the adaptation always), disabled (do not perform adaptation)
      ##
      adaptSecurityContext: auto

## @param development Deploys Chainloop pre-configured FOR DEVELOPMENT ONLY. It includes a Vault instance in development mode and pre-configured authentication certificates and passphrases
##
development: true

## @section Common parameters
##
## @param kubeVersion Override Kubernetes version
##
kubeVersion: ""
## @param apiVersions Override Kubernetes API versions reported by .Capabilities
##
apiVersions: []
## @param nameOverride String to partially override common.names.name
##
nameOverride: ""
## @param fullnameOverride String to fully override common.names.fullname
##
fullnameOverride: ""
## @param namespaceOverride String to fully override common.names.namespace
##
namespaceOverride: ""

## @param commonAnnotations Annotations to add to all deployed objects
##
commonAnnotations: {}

## @param commonLabels Labels to add to all deployed objects
##
commonLabels: {}

## @param extraDeploy Array of extra objects to deploy with the release
##
extraDeploy: []

## RBAC configuration
##
rbac:
  ## @param rbac.create Specifies whether RBAC resources should be created
  ##
  create: false
  ## @param rbac.rules Custom RBAC rules to set
  ## e.g:
  ## rules:
  ##   - apiGroups:
  ##       - ""
  ##     resources:
  ##       - pods
  ##     verbs:
  ##       - get
  ##       - list
  ##
  rules: []

## @section Secrets Backend
##

## Location where to store sensitive data. If development=true and no overrides are provided, the setup will connect to a development instance of Vault
##
secretsBackend:
  ## @param secretsBackend.backend Secrets backend type ("vault", "awsSecretManager" or "gcpSecretManager", "azureKeyVault")
  ##
  backend: "vault" # "awsSecretManager | gcpSecretManager | azureKeyVault"
  ## @param secretsBackend.secretPrefix Prefix that will be pre-pended to all secrets in the storage backend
  ##
  secretPrefix: "chainloop"

  ## @param secretsBackend.vault.address Vault address
  ## @param secretsBackend.vault.token Vault authentication token
  ##
  vault:
    address: ""
    token: ""

  ## @param secretsBackend.awsSecretManager.accessKey AWS Access KEY ID
  ## @param secretsBackend.awsSecretManager.secretKey AWS Secret Key
  ## @param secretsBackend.awsSecretManager.region AWS Secrets Manager Region
  ##
  awsSecretManager:
    accessKey: ""
    secretKey: ""
    region: ""

  ## @param secretsBackend.gcpSecretManager.projectId GCP Project ID
  ## @param secretsBackend.gcpSecretManager.serviceAccountKey GCP Auth Key
  ##
  gcpSecretManager:
    projectId: ""
    serviceAccountKey: ""

  ## @param secretsBackend.azureKeyVault.tenantID Active Directory Tenant ID
  ## @param secretsBackend.azureKeyVault.clientID Registered application / service principal client ID
  ## @param secretsBackend.azureKeyVault.clientSecret Service principal client secret
  ## @param secretsBackend.azureKeyVault.vaultURI Azure Key Vault URL
  ##
  azureKeyVault:
    tenantID: ""
    clientID: ""
    clientSecret: ""
    vaultURI: ""

## @section Authentication
##

## ECDSA (ES512) key-pair used for Controlplane to; CAS Authentication
## The controlplane will use the private key to generate a JWT at user request
## The CAS will use the public key to verify the authenticity of that token
## If development=true is set, a development key will be configured automatically
## otherwise you'll need to provide new keys via .Values.casJWTPrivateKey and .Values.cas.casJWTPublicKey

## @param casJWTPrivateKey ECDSA (ES512) private key used for Controlplane to CAS Authentication
##
## To generate one
## openssl ecparam -name secp521r1 -genkey -noout -out private.ec.key
## casJWTPrivateKey: |-
##   -----BEGIN EC PRIVATE KEY-----
##   -----END EC PRIVATE KEY-----
##
casJWTPrivateKey: ""

## @param casJWTPublicKey ECDSA (ES512) public key
##
# openssl ec -in private.ec.key -pubout -out public.pem
# casJWTPublicKey: |
#   -----BEGIN PUBLIC KEY-----
#   -----END PUBLIC KEY-----
casJWTPublicKey: ""

## @section Control Plane
###################################
##          CONTROL PLANE         #
###################################
controlplane:
  ## @param controlplane.replicaCount Number of replicas
  replicaCount: 2

  ## Bitnami Chainloop Controlplane image
  ## ref: https://hub.docker.com/r/bitnami/chainloop-control-plane/tags/
  ## @param controlplane.image.registry [default: REGISTRY_NAME] image registry
  ## @param controlplane.image.repository [default: REPOSITORY_NAME/chainloop-control-plane] image repository
  ## @skip controlplane.image.tag image tag (immutable tags are recommended)
  ## @param controlplane.image.digest image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param controlplane.image.pullPolicy image pull policy
  ## @param controlplane.image.pullSecrets image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/chainloop-control-plane
    tag: 1.43.1-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: [ ]

  ## @param controlplane.containerPorts.http controlplane HTTP container port
  ## @param controlplane.containerPorts.grpc controlplane gRPC container port
  ## @param controlplane.containerPorts.metrics controlplane prometheus metrics container port
  ##
  containerPorts:
    http: 8000
    grpc: 9000
    metrics: 5000

  ##
  ## TLS configuration
  ##
  tls:
    ## @param controlplane.tls.existingSecret Existing secret with TLS certificates. The secret must contains 2 keys: tls.crt and tls.key respectively containing the certificate and private key.
    ## NOTE: When it's set it will disable secret creation.
    ##
    existingSecret: ""

  ## Use an existing configmap instead of creating a configmap with the specified parameters
  ## @param controlplane.existingConfigMap
  ##
  existingConfigMap: ""

  ## @param controlplane.pluginsDir Directory where to look for plugins
  pluginsDir: /plugins

  ## @extra controlplane.referrerSharedIndex Configure the shared, public index API endpoint that can be used to discover metadata referrers
  ## @param controlplane.referrerSharedIndex.enabled Enable index API endpoint
  ## @param controlplane.referrerSharedIndex.allowedOrgs List of UUIDs of organizations that are allowed to publish to the shared index
  referrerSharedIndex:
    enabled: false
    allowedOrgs: []

  ## @param controlplane.onboarding List of organizations to automatically onboard when a user logs in
  ##  e.g:
  ## onboarding:
  ##    - name: ""
  ##      role: ""
  onboarding: []

  ## @param controlplane.prometheus_org_metrics List of organizations to expose metrics for using Prometheus
  ##  e.g.:
  ##  prometheus_org_metrics:
  ##    - org_name: "read-only-demo"
  prometheus_org_metrics: []

  # Database migration
  ## @param controlplane.migration.ssl Connect to the database using SSL (required fro AWS RDS, etc)
  ## @skip controlplane.migration.image.tag
  migration:
    ## Bitnami Chainloop Controlplane migration image
    ## ref: https://hub.docker.com/r/bitnami/chainloop-control-plane-migrations/tags/
    ## @param controlplane.migration.image.registry [default: REGISTRY_NAME] image registry
    ## @param controlplane.migration.image.repository [default: REPOSITORY_NAME/chainloop-control-plane-migrations] image repository
    ## @skip controlplane.migration.image.tag image tag (immutable tags are recommended)
    ## @param controlplane.migration.image.digest image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
    ## @param controlplane.migration.image.pullPolicy image pull policy
    ## @param controlplane.migration.image.pullSecrets image pull secrets
    ##
    image:
      registry: docker.io
      repository: bitnami/chainloop-control-plane-migrations
      tag: 1.43.1-debian-12-r0
      digest: ""
      ## Specify a imagePullPolicy
      ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
      ##
      pullPolicy: IfNotPresent
      ## Optionally specify an array of imagePullSecrets.
      ## Secrets must be manually created in the namespace.
      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
      ## e.g:
      ## pullSecrets:
      ##   - myRegistryKeySecretName
      ##
      pullSecrets: [ ]
    # Run the migration job forcing SSL, required in AWS RDS for PostgreSQL 15
    ssl: false

  ## ServiceAccount configuration for the Controlplane Migration
  ##
  ## @param controlplane.serviceAccount.create Specifies whether a ServiceAccount should be created
  ## @param controlplane.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
  ## @param controlplane.serviceAccount.name Name of the service account to use. If not set and create is true, a name is generated using the fullname template.
  ## @param controlplane.serviceAccount.automountServiceAccountToken Mount Service Account token in controlplane pods
  serviceAccount:
    create: true
    annotations: {}
    name: ""
    automountServiceAccountToken: false

  ## @section Control Plane Database

  ## @extra controlplane.externalDatabase External PostgreSQL configuration. These values are only used when postgresql.enabled is set to false
  ## @param controlplane.externalDatabase.host Database host
  ## @param controlplane.externalDatabase.port Database port number
  ## @param controlplane.externalDatabase.user Non-root username
  ## @param controlplane.externalDatabase.database Database name
  ## @param controlplane.externalDatabase.password Password for the non-root username
  ##
  externalDatabase:
    host: ""
    port: 5432
    user: ""
    database: ""
    password: ""

  ## @section Control Plane Authentication
  auth:
    ## @param controlplane.auth.passphrase Passphrase used to sign the Auth Tokens generated by the controlplane. Leave empty for auto-generation
    ##
    passphrase: ""

    ## @param controlplane.auth.oidc.url Full authentication path, it should match the issuer URL of the Identity provider (IDp)
    ## @param controlplane.auth.oidc.clientID OIDC IDp clientID
    ## @param controlplane.auth.oidc.clientSecret OIDC IDp clientSecret
    ## @param controlplane.auth.oidc.loginURLOverride Optional OIDC login URL override, useful to point to custom login pages
    ## @param controlplane.auth.oidc.externalURL Optional External URL for the controlplane to the outside world
    oidc:
      url: ""
      clientID: ""
      clientSecret: ""
      loginURLOverride: ""
      externalURL: ""

    ## @param controlplane.auth.allowList Content of the allow_list.yaml config file
    ## @extra controlplane.auth.allowList.rules List of domains or emails to allow
    ## @extra controlplane.auth.allowList.selectedRoutes List of selected routes to allow. If not set it applies to all routes
    ## @extra controlplane.auth.allowList.customMessage Custom message to display when a user is not allowed
    ## e.g.
    ##    allowList:
    ##      rules: []
    ##      selectedRoutes: []
    ##      customMessage: ""
    allowList: {}

  ## @section Control Plane Networking
  service:
    ## @param controlplane.service.type Service type
    type: ClusterIP

    ## @param controlplane.service.ports.http controlplane service HTTP port
    ##
    ports:
      http: 80
    ## Node ports to expose
    ## @param controlplane.service.nodePorts.http Node port for HTTP
    ## @param controlplane.service.nodePorts.https Node port for HTTPS
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
      https: ""
    ## @param controlplane.service.clusterIP controlplane service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param controlplane.service.loadBalancerIP controlplane service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param controlplane.service.loadBalancerSourceRanges controlplane service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param controlplane.service.externalTrafficPolicy controlplane service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param controlplane.service.annotations Additional custom annotations for controlplane service
    ##
    annotations: {}
    ## @param controlplane.service.extraPorts Extra ports to expose in controlplane service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param controlplane.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param controlplane.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}

  serviceAPI:
    ## @param controlplane.serviceAPI.type Service type
    type: ClusterIP

    ## @param controlplane.serviceAPI.ports.http controlplane service HTTP port
    ## @param controlplane.serviceAPI.ports.https controlplane service HTTPS port
    ##
    ports:
      http: 80
      https: 443
    ## Node ports to expose
    ## @param controlplane.serviceAPI.nodePorts.http Node port for HTTP
    ## @param controlplane.serviceAPI.nodePorts.https Node port for HTTPS
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
      https: ""
    ## @param controlplane.serviceAPI.clusterIP controlplane service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param controlplane.serviceAPI.loadBalancerIP controlplane service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param controlplane.serviceAPI.loadBalancerSourceRanges controlplane service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param controlplane.serviceAPI.externalTrafficPolicy controlplane service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @extra controlplane.serviceAPI.annotations Additional custom annotations for controlplane service
    ##
    annotations:
      ## @skip controlplane.serviceAPI.annotations.traefik.ingress.kubernetes.io/service.serversscheme
      traefik.ingress.kubernetes.io/service.serversscheme: h2c
    ## @param controlplane.serviceAPI.extraPorts Extra ports to expose in controlplane service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param controlplane.serviceAPI.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param controlplane.serviceAPI.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}

  ## ref: http://kubernetes.io/docs/user-guide/ingress/
  ingress:
    ## @param controlplane.ingress.enabled Enable ingress record generation for controlplane
    ##
    enabled: false
    ## @param controlplane.ingress.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param controlplane.ingress.hostname Default host for the ingress record
    ##
    hostname: cp.dev.local
    ## @param controlplane.ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param controlplane.ingress.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @param controlplane.ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/controlplane.ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations: {}
    ## @param controlplane.ingress.tls Enable TLS configuration for the host defined at `controlplane.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.controlplane.ingress.hostname }}`
    ## You can:
    ##   - Use the `controlplane.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `controlplane.ingress.selfSigned=true`
    ##
    tls: false
    ## @param controlplane.ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param controlplane.ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: cp.dev.local
    ##     path: /
    ##
    extraHosts: []
    ## @param controlplane.ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param controlplane.ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - cp.dev.local
    ##   secretName: cp.dev.local-tls
    ##
    extraTls: []
    ## @param controlplane.ingress.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: cp.dev.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param controlplane.ingress.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []

  ## ref: http://kubernetes.io/docs/user-guide/ingress/
  ingressAPI:
    ## @param controlplane.ingressAPI.enabled Enable ingress record generation for controlplane
    ##
    enabled: false
    ## @param controlplane.ingressAPI.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param controlplane.ingressAPI.hostname Default host for the ingress record
    ##
    hostname: api.cp.dev.local
    ## @param controlplane.ingressAPI.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param controlplane.ingressAPI.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @extra controlplane.ingressAPI.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/controlplane.ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations:
      ## @skip controlplane.ingressAPI.annotations.nginx.ingress.kubernetes.io/backend-protocol
      ## Tell Nginx Ingress Controller to expect gRPC traffic
      nginx.ingress.kubernetes.io/backend-protocol: "GRPC"

    ## @param controlplane.ingressAPI.tls Enable TLS configuration for the host defined at `controlplane.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.controlplane.ingress.hostname }}`
    ## You can:
    ##   - Use the `controlplane.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `controlplane.ingress.selfSigned=true`
    ##
    tls: false
    ## @param controlplane.ingressAPI.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param controlplane.ingressAPI.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: cp.dev.local
    ##     path: /
    ##
    extraHosts: []
    ## @param controlplane.ingressAPI.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param controlplane.ingressAPI.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - cp.dev.local
    ##   secretName: cp.dev.local-tls
    ##
    extraTls: []
    ## @param controlplane.ingressAPI.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: cp.dev.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param controlplane.ingressAPI.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []

  ## @section Controlplane Misc

  ## Init container's resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param controlplane.resourcesPreset Set init container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "micro"
  ## @param controlplane.resources Set controlplane container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param controlplane.podSecurityContext.enabled Enable controlplane pods' Security Context
  ## @param controlplane.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy for controlplane pods
  ## @param controlplane.podSecurityContext.sysctls Set kernel settings using the sysctl interface for controlplane pods
  ## @param controlplane.podSecurityContext.supplementalGroups Set filesystem extra groups for controlplane pods
  ## @param controlplane.podSecurityContext.fsGroup Set fsGroup in controlplane pods' Security Context
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001

  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param controlplane.containerSecurityContext.enabled Enabled controlplane container' Security Context
  ## @param controlplane.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in controlplane container
  ## @param controlplane.containerSecurityContext.runAsUser Set runAsUser in controlplane container' Security Context
  ## @param controlplane.containerSecurityContext.runAsGroup Set runAsGroup in controlplane container' Security Context
  ## @param controlplane.containerSecurityContext.runAsNonRoot Set runAsNonRoot in controlplane container' Security Context
  ## @param controlplane.containerSecurityContext.readOnlyRootFilesystem Set readOnlyRootFilesystem in controlplane container' Security Context
  ## @param controlplane.containerSecurityContext.privileged Set privileged in controlplane container' Security Context
  ## @param controlplane.containerSecurityContext.allowPrivilegeEscalation Set allowPrivilegeEscalation in controlplane container' Security Context
  ## @param controlplane.containerSecurityContext.capabilities.drop List of capabilities to be dropped in controlplane container
  ## @param controlplane.containerSecurityContext.seccompProfile.type Set seccomp profile in controlplane container
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    readOnlyRootFilesystem: true
    privileged: false
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"

  ## @param controlplane.sentry.enabled Enable sentry.io alerting
  ## @param controlplane.sentry.dsn DSN endpoint
  ## @param controlplane.sentry.environment Environment tag
  sentry:
    enabled: false
    dsn: ""
    environment: production

  ## @section Keyless signing configuration

  ## Configuration for keyless signing using one of the supported providers
  ## @param controlplane.keylessSigning.enabled Activates or deactivates the feature
  ## @param controlplane.keylessSigning.backend The backend to use. Currently only "fileCA" and "ejbcaCA" are supported
  ## @param controlplane.keylessSigning.fileCA.cert The PEM-encoded certificate of the file based CA
  ##       -----BEGIN CERTIFICATE-----
  ##       ...
  ##       -----END CERTIFICATE-----
  ## @param controlplane.keylessSigning.fileCA.key The PEM-encoded private key of the file based CA
  ##       -----BEGIN RSA PRIVATE KEY-----
  ##       ...
  ##       -----END RSA PRIVATE KEY-----
  ## @param controlplane.keylessSigning.fileCA.keyPass The secret key pass
  ## @param controlplane.keylessSigning.ejbcaCA.serverURL The url of the EJBCA service ("https://host/ejbca")
  ## @param controlplane.keylessSigning.ejbcaCA.clientKey PEM-encoded the private key for EJBCA cert authentication
  ## @param controlplane.keylessSigning.ejbcaCA.clientCert PEM-encoded certificate for EJBCA cert authentication
  ## @param controlplane.keylessSigning.ejbcaCA.certProfileName Name of the certificate profile to use in EJBCA
  ## @param controlplane.keylessSigning.ejbcaCA.endEntityProfileName Name of the Entity Profile to use in EJBCA
  ## @param controlplane.keylessSigning.ejbcaCA.caName Name of the CA issuer to use in EJBCA
  keylessSigning:
    enabled: false
    backend: fileCA
    fileCA:
      cert: ""
      key: ""
      keyPass: ""
    ejbcaCA:
      serverURL: ""
      clientKey: ""
      clientCert: ""
      certProfileName: ""
      endEntityProfileName: ""
      caName: ""

  ## Inject custom CA certificates to the controlplane container
  ## @param controlplane.customCAs List of custom CA certificates content
  customCAs: []

  ## @param controlplane.automountServiceAccountToken Mount Service Account token in controlplane pods
  ##
  automountServiceAccountToken: false

  ## @param controlplane.hostAliases controlplane pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []

  ## @param controlplane.deploymentAnnotations Annotations for controlplane deployment
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  deploymentAnnotations: {}

  ## @param controlplane.podLabels Extra labels for controlplane pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}

  ## @param controlplane.podAffinityPreset Pod affinity preset. Ignored if `controlplane.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param controlplane.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `controlplane.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node controlplane.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##

  ## Node controlplane.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param controlplane.nodeAffinityPreset.type Node affinity preset type. Ignored if `controlplane.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param controlplane.nodeAffinityPreset.key Node label key to match. Ignored if `controlplane.affinity` is set
    ##
    key: ""
    ## @param controlplane.nodeAffinityPreset.values Node label values to match. Ignored if `controlplane.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param controlplane.affinity Affinity for controlplane pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `controlplane.podAffinityPreset`, `controlplane.podAntiAffinityPreset`, and `controlplane.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param controlplane.nodeSelector Node labels for controlplane pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param controlplane.tolerations Tolerations for controlplane pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []

  ## @param controlplane.updateStrategy.type controlplane deployment strategy type
  updateStrategy:
    ## Can be set to RollingUpdate or Recreate
    type: RollingUpdate
  ## @param controlplane.priorityClassName controlplane pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param controlplane.topologySpreadConstraints Topology Spread Constraints for controlplane pod assignment spread across your cluster among failure-domains
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param controlplane.schedulerName Name of the k8s scheduler (other than default) for controlplane pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param controlplane.terminationGracePeriodSeconds Seconds controlplane pods need to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param controlplane.lifecycleHooks for controlplane containers to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param controlplane.extraEnvVars Array with extra environment variables to add to controlplane containers
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param controlplane.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for controlplane containers
  ##
  extraEnvVarsCM: ""
  ## @param controlplane.extraEnvVarsSecret Name of existing Secret containing extra env vars for controlplane containers
  ##
  extraEnvVarsSecret: ""
  ## @param controlplane.extraVolumes Optionally specify extra list of additional volumes for the controlplane pods
  ##
  extraVolumes: []
  ## @param controlplane.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the controlplane containers
  ##
  extraVolumeMounts: []
  ## @param controlplane.sidecars Add additional sidecar containers to the controlplane pods
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []

  ## Controlplane Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param controlplane.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param controlplane.networkPolicy.allowExternal Don't require client label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## client label will have network access to the ports Web is listening
    ## on. When true, Web will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param controlplane.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param controlplane.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: [ ]
    ## @param controlplane.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: [ ]
    ## @param controlplane.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param controlplane.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: { }
    ingressNSPodMatchLabels: { }

  ## @param controlplane.initContainers Add additional init containers to the controlplane pods
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param controlplane.autoscaling.vpa.enabled Enable VPA for %%MAIN_CONTAINER_NAME%% pods
    ## @param controlplane.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param controlplane.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param controlplane.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param controlplane.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: { }
      controlledResources: [ ]
      maxAllowed: { }
      minAllowed: { }
      ## @param controlplane.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto

    ## @param controlplane.autoscaling.hpa.enabled Enable HPA for controlplane pods
    ## @param controlplane.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param controlplane.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param controlplane.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param controlplane.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""

  ## Pod disruption budget configuration
  ## Ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
  ## @param controlplane.pdb.enabled Create Pod Disruption Budget for the controlplane component
  ## @param controlplane.pdb.minAvailable Sets the min number of pods availables for the Pod Disruption Budget
  ## @param controlplane.pdb.maxUnavailable Sets the max number of pods unavailable for the Pod Disruption Budget
  ##
  pdb:
    enabled: false
    minAvailable: ""
    maxUnavailable: ""

## @section Artifact Content Addressable (CAS) API
##################################
#         Artifacts CAS          #
##################################
cas:
  ## @param cas.replicaCount Number of replicas
  replicaCount: 2

  ## Bitnami Chainloop Artifact CAS image
  ## ref: https://hub.docker.com/r/bitnami/chainloop-artifact-cas/tags/
  ## @param cas.image.registry [default: REGISTRY_NAME] image registry
  ## @param cas.image.repository [default: REPOSITORY_NAME/chainloop-artifact-cas] image repository
  ## @skip cas.image.tag image tag (immutable tags are recommended)
  ## @param cas.image.digest image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag
  ## @param cas.image.pullPolicy image pull policy
  ## @param cas.image.pullSecrets image pull secrets
  ##
  image:
    registry: docker.io
    repository: bitnami/chainloop-artifact-cas
    tag: 1.43.1-debian-12-r0
    digest: ""
    ## Specify a imagePullPolicy
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: [ ]

  ## @param cas.containerPorts.http controlplane HTTP container port
  ## @param cas.containerPorts.grpc controlplane gRPC container port
  ## @param cas.containerPorts.metrics controlplane prometheus metrics container port
  ##
  containerPorts:
    http: 8000
    grpc: 9000
    metrics: 5000

  ##
  ## TLS configuration
  ##
  tls:
    ## @param cas.tls.existingSecret Existing secret with TLS certificates. The secret must contains 2 keys: tls.crt and tls.key respectively containing the certificate and private key.
    ## NOTE: When it's set it will disable secret creation.
    ##
    existingSecret: ""

  ## Use an existing configmap instead of creating a configmap with the specified parameters
  ## @param cas.existingConfigMap
  ##
  existingConfigMap: ""

  ## ServiceAccount configuration for the Controlplane Artifact CAS
  ##
  ## @param cas.serviceAccount.create Specifies whether a ServiceAccount should be created
  ## @param cas.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
  ## @param cas.serviceAccount.name Name of the service account to use. If not set and create is true, a name is generated using the fullname template.
  ## @param cas.serviceAccount.automountServiceAccountToken Mount Service Account token in controlplane pods
  serviceAccount:
    create: true
    annotations: {}
    name: ""
    automountServiceAccountToken: false

  ## @section CAS Networking
  service:
    ## @param cas.service.type Service type
    type: ClusterIP

    ## @param cas.service.ports.http cas service HTTP port
    ## @param cas.service.ports.https cas service HTTPS port
    ##
    ports:
      http: 80
      https: 443
    ## Node ports to expose
    ## @param cas.service.nodePorts.http Node port for HTTP
    ## @param cas.service.nodePorts.https Node port for HTTPS
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
      https: ""
    ## @param cas.service.clusterIP cas service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param cas.service.loadBalancerIP cas service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param cas.service.loadBalancerSourceRanges cas service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param cas.service.externalTrafficPolicy cas service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param cas.service.annotations Additional custom annotations for cas service
    ##
    annotations: {}
    ## @param cas.service.extraPorts Extra ports to expose in cas service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param cas.service.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param cas.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}

  serviceAPI:
    ## @param cas.serviceAPI.type Service type
    type: ClusterIP

    ## @param cas.serviceAPI.ports.http cas service HTTP port
    ## @param cas.serviceAPI.ports.https cas service HTTPS port
    ##
    ports:
      http: 80
      https: 443
    ## Node ports to expose
    ## @param cas.serviceAPI.nodePorts.http Node port for HTTP
    ## @param cas.serviceAPI.nodePorts.https Node port for HTTPS
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
      https: ""
    ## @param cas.serviceAPI.clusterIP cas service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param cas.serviceAPI.loadBalancerIP cas service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param cas.serviceAPI.loadBalancerSourceRanges cas service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param cas.serviceAPI.externalTrafficPolicy cas service external traffic policy
    ## ref http://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @extra cas.serviceAPI.annotations Additional custom annotations for cas service
    ##
    annotations:
      ## @skip cas.serviceAPI.annotations.traefik.ingress.kubernetes.io/service.serversscheme
      traefik.ingress.kubernetes.io/service.serversscheme: h2c
    ## @param cas.serviceAPI.extraPorts Extra ports to expose in cas service (normally used with the `sidecars` value)
    ##
    extraPorts: []
    ## @param cas.serviceAPI.sessionAffinity Control where client requests go, to the same pod or round-robin
    ## Values: ClientIP or None
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/
    ##
    sessionAffinity: None
    ## @param cas.serviceAPI.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    ##
    sessionAffinityConfig: {}


  ## ref: http://kubernetes.io/docs/user-guide/ingress/
  ingress:
    ## @param cas.ingress.enabled Enable ingress record generation for controlplane
    ##
    enabled: false
    ## @param cas.ingress.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param cas.ingress.hostname Default host for the ingress record
    ##
    hostname: cas.dev.local
    ## @param cas.ingress.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param cas.ingress.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @param cas.ingress.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/cas.ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations: {}
    ## @param cas.ingress.tls Enable TLS configuration for the host defined at `controlplane.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.controlplane.ingress.hostname }}`
    ## You can:
    ##   - Use the `controlplane.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `controlplane.ingress.selfSigned=true`
    ##
    tls: false
    ## @param cas.ingress.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param cas.ingress.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: cp.dev.local
    ##     path: /
    ##
    extraHosts: []
    ## @param cas.ingress.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param cas.ingress.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - cp.dev.local
    ##   secretName: cp.dev.local-tls
    ##
    extraTls: []
    ## @param cas.ingress.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: cp.dev.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param cas.ingress.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []

  ## ref: http://kubernetes.io/docs/user-guide/ingress/
  ingressAPI:
    ## @param cas.ingressAPI.enabled Enable ingress record generation for controlplane
    ##
    enabled: false
    ## @param cas.ingressAPI.pathType Ingress path type
    ##
    pathType: ImplementationSpecific
    ## @param cas.ingressAPI.hostname Default host for the ingress record
    ##
    hostname: api.cas.dev.local
    ## @param cas.ingressAPI.ingressClassName IngressClass that will be be used to implement the Ingress (Kubernetes 1.18+)
    ## This is supported in Kubernetes 1.18+ and required if you have more than one IngressClass marked as the default for your cluster .
    ## ref: https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/
    ##
    ingressClassName: ""
    ## @param cas.ingressAPI.path Default path for the ingress record
    ## NOTE: You may need to set this to '/*' in order to use this with ALB ingress controllers
    ##
    path: /
    ## @extra cas.ingressAPI.annotations Additional annotations for the Ingress resource. To enable certificate autogeneration, place here your cert-manager annotations.
    ## Use this parameter to set the required annotations for cert-manager, see
    ## ref: https://cert-manager.io/docs/usage/ingress/#supported-annotations
    ## e.g:
    ## annotations:
    ##   kubernetes.io/controlplane.ingress.class: nginx
    ##   cert-manager.io/cluster-issuer: cluster-issuer-name
    ##
    annotations:
      # Nginx Ingress settings
      ## @skip cas.ingressAPI.annotations.nginx.ingress.kubernetes.io/proxy-body-size
      # Limit file uploads/downloads to 100MB. Alternatively you can disable this limitation by setting it to 0
      # Even though we send data in chunks of 1MB, this size refers to all the data sent during the whole streaming session
      nginx.ingress.kubernetes.io/proxy-body-size: "100m"
      ## @skip cas.ingressAPI.annotations.nginx.ingress.kubernetes.io/backend-protocol
      ## Tell Nginx Ingress Controller to expect gRPC traffic
      nginx.ingress.kubernetes.io/backend-protocol: "GRPC"
      ## @skip cas.ingressAPI.annotations.nginx.ingress.kubernetes.io/client-body-buffer-size
      # Improve upload speed by adding client buffering used by http2 control-flows
      # https://github.com/chainloop-dev/chainloop/issues/375
      nginx.ingress.kubernetes.io/client-body-buffer-size: "3M"

    ## @param cas.ingressAPI.tls Enable TLS configuration for the host defined at `controlplane.ingress.hostname` parameter
    ## TLS certificates will be retrieved from a TLS secret with name: `{{- printf "%s-tls" .Values.controlplane.ingress.hostname }}`
    ## You can:
    ##   - Use the `controlplane.ingress.secrets` parameter to create this TLS secret
    ##   - Rely on cert-manager to create it by setting the corresponding annotations
    ##   - Rely on Helm to create self-signed certificates by setting `controlplane.ingress.selfSigned=true`
    ##
    tls: false
    ## @param cas.ingressAPI.selfSigned Create a TLS secret for this ingress record using self-signed certificates generated by Helm
    ##
    selfSigned: false
    ## @param cas.ingressAPI.extraHosts An array with additional hostname(s) to be covered with the ingress record
    ## e.g:
    ## extraHosts:
    ##   - name: cp.dev.local
    ##     path: /
    ##
    extraHosts: []
    ## @param cas.ingressAPI.extraPaths An array with additional arbitrary paths that may need to be added to the ingress under the main host
    ## e.g:
    ## extraPaths:
    ## - path: /*
    ##   backend:
    ##     serviceName: ssl-redirect
    ##     servicePort: use-annotation
    ##
    extraPaths: []
    ## @param cas.ingressAPI.extraTls TLS configuration for additional hostname(s) to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#tls
    ## e.g:
    ## extraTls:
    ## - hosts:
    ##     - cp.dev.local
    ##   secretName: cp.dev.local-tls
    ##
    extraTls: []
    ## @param cas.ingressAPI.secrets Custom TLS certificates as secrets
    ## NOTE: 'key' and 'certificate' are expected in PEM format
    ## NOTE: 'name' should line up with a 'secretName' set further up
    ## If it is not set and you're using cert-manager, this is unneeded, as it will create a secret for you with valid certificates
    ## If it is not set and you're NOT using cert-manager either, self-signed certificates will be created valid for 365 days
    ## It is also possible to create and manage the certificates outside of this helm chart
    ## Please see README.md for more information
    ## e.g:
    ## secrets:
    ##   - name: cp.dev.local-tls
    ##     key: |-
    ##       -----BEGIN RSA PRIVATE KEY-----
    ##       ...
    ##       -----END RSA PRIVATE KEY-----
    ##     certificate: |-
    ##       -----BEGIN CERTIFICATE-----
    ##       ...
    ##       -----END CERTIFICATE-----
    ##
    secrets: []
    ## @param cas.ingressAPI.extraRules Additional rules to be covered with this ingress record
    ## ref: https://kubernetes.io/docs/concepts/services-networking/ingress/#ingress-rules
    ## e.g:
    ## extraRules:
    ## - host: example.local
    ##     http:
    ##       path: /
    ##       backend:
    ##         service:
    ##           name: example-svc
    ##           port:
    ##             name: http
    ##
    extraRules: []

  ## @section CAS Misc
  ## @param cas.sentry.enabled Enable sentry.io alerting
  ## @param cas.sentry.dsn DSN endpoint
  ## @param cas.sentry.environment Environment tag
  sentry:
    enabled: false
    dsn: ""
    environment: production

  ## Inject custom CA certificates to the CAS container
  ## @param cas.customCAs List of custom CA certificates content
  customCAs: []

  ## Init container's resource requests and limits
  ## ref: http://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param cas.resourcesPreset Set init container resources according to one common preset (allowed values: none, nano, small, medium, large, xlarge, 2xlarge). This is ignored if volumePermissions.resources is set (volumePermissions.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "micro"
  ## @param cas.resources Set cas container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param cas.podSecurityContext.enabled Enable cas pods' Security Context
  ## @param cas.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy for cas pods
  ## @param cas.podSecurityContext.sysctls Set kernel settings using the sysctl interface for cas pods
  ## @param cas.podSecurityContext.supplementalGroups Set filesystem extra groups for cas pods
  ## @param cas.podSecurityContext.fsGroup Set fsGroup in cas pods' Security Context
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001

  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
  ## @param cas.containerSecurityContext.enabled Enabled cas container' Security Context
  ## @param cas.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in cas container
  ## @param cas.containerSecurityContext.runAsUser Set runAsUser in cas container' Security Context
  ## @param cas.containerSecurityContext.runAsGroup Set runAsGroup in cas container' Security Context
  ## @param cas.containerSecurityContext.runAsNonRoot Set runAsNonRoot in cas container' Security Context
  ## @param cas.containerSecurityContext.readOnlyRootFilesystem Set readOnlyRootFilesystem in cas container' Security Context
  ## @param cas.containerSecurityContext.privileged Set privileged in cas container' Security Context
  ## @param cas.containerSecurityContext.allowPrivilegeEscalation Set allowPrivilegeEscalation in cas container' Security Context
  ## @param cas.containerSecurityContext.capabilities.drop List of capabilities to be dropped in cas container
  ## @param cas.containerSecurityContext.seccompProfile.type Set seccomp profile in cas container
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    readOnlyRootFilesystem: true
    privileged: false
    allowPrivilegeEscalation: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"

  ## @param cas.automountServiceAccountToken Mount Service Account token in cas pods
  ##
  automountServiceAccountToken: false

  ## @param cas.hostAliases cas pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []

  ## @param cas.deploymentAnnotations Annotations for cas deployment
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  deploymentAnnotations: {}

  ## @param cas.podLabels Extra labels for cas pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}

  ## @param cas.podAffinityPreset Pod affinity preset. Ignored if `cas.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param cas.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `cas.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node cas.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##

  ## Node cas.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param cas.nodeAffinityPreset.type Node affinity preset type. Ignored if `cas.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param cas.nodeAffinityPreset.key Node label key to match. Ignored if `cas.affinity` is set
    ##
    key: ""
    ## @param cas.nodeAffinityPreset.values Node label values to match. Ignored if `cas.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param cas.affinity Affinity for cas pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `cas.podAffinityPreset`, `cas.podAntiAffinityPreset`, and `cas.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param cas.nodeSelector Node labels for cas pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param cas.tolerations Tolerations for cas pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []

  ## @param cas.updateStrategy.type cas deployment strategy type
  updateStrategy:
    ## Can be set to RollingUpdate or Recreate
    type: RollingUpdate
  ## @param cas.priorityClassName cas pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param cas.topologySpreadConstraints Topology Spread Constraints for cas pod assignment spread across your cluster among failure-domains
  ## Ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/#spread-constraints-for-pods
  ##
  topologySpreadConstraints: []
  ## @param cas.schedulerName Name of the k8s scheduler (other than default) for cas pods
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param cas.terminationGracePeriodSeconds Seconds cas pods need to terminate gracefully
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod/#termination-of-pods
  ##
  terminationGracePeriodSeconds: ""
  ## @param cas.lifecycleHooks for cas containers to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param cas.extraEnvVars Array with extra environment variables to add to cas containers
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param cas.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for cas containers
  ##
  extraEnvVarsCM: ""
  ## @param cas.extraEnvVarsSecret Name of existing Secret containing extra env vars for cas containers
  ##
  extraEnvVarsSecret: ""
  ## @param cas.extraVolumes Optionally specify extra list of additional volumes for the cas pods
  ##
  extraVolumes: []
  ## @param cas.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the cas containers
  ##
  extraVolumeMounts: []
  ## @param cas.sidecars Add additional sidecar containers to the cas pods
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []

  ## Web Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param cas.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param cas.networkPolicy.allowExternal Don't require client label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## client label will have network access to the ports Web is listening
    ## on. When true, Web will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param cas.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param cas.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: [ ]
    ## @param cas.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: [ ]
    ## @param cas.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param cas.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: { }
    ingressNSPodMatchLabels: { }

  ## @param cas.initContainers Add additional init containers to the cas pods
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## Autoscaling configuration
  ## ref: https://kubernetes.io/docs/concepts/workloads/autoscaling/
  ##
  autoscaling:
    ## @param cas.autoscaling.vpa.enabled Enable VPA for %%MAIN_CONTAINER_NAME%% pods
    ## @param cas.autoscaling.vpa.annotations Annotations for VPA resource
    ## @param cas.autoscaling.vpa.controlledResources VPA List of resources that the vertical pod autoscaler can control. Defaults to cpu and memory
    ## @param cas.autoscaling.vpa.maxAllowed VPA Max allowed resources for the pod
    ## @param cas.autoscaling.vpa.minAllowed VPA Min allowed resources for the pod
    ##
    vpa:
      enabled: false
      annotations: { }
      controlledResources: [ ]
      maxAllowed: { }
      minAllowed: { }
      ## @param cas.autoscaling.vpa.updatePolicy.updateMode Autoscaling update policy
      ## Specifies whether recommended updates are applied when a Pod is started and whether recommended updates are applied during the life of a Pod
      ## Possible values are "Off", "Initial", "Recreate", and "Auto".
      ##
      updatePolicy:
        updateMode: Auto

    ## @param cas.autoscaling.hpa.enabled Enable HPA for cas pods
    ## @param cas.autoscaling.hpa.minReplicas Minimum number of replicas
    ## @param cas.autoscaling.hpa.maxReplicas Maximum number of replicas
    ## @param cas.autoscaling.hpa.targetCPU Target CPU utilization percentage
    ## @param cas.autoscaling.hpa.targetMemory Target Memory utilization percentage
    ##
    hpa:
      enabled: false
      minReplicas: ""
      maxReplicas: ""
      targetCPU: ""
      targetMemory: ""

  ## Pod disruption budget configuration
  ## Ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
  ## @param cas.pdb.enabled Create Pod Disruption Budget for the cas component
  ## @param cas.pdb.minAvailable Sets the min number of pods available for the Pod Disruption Budget
  ## @param cas.pdb.maxUnavailable Sets the max number of pods unavailable for the Pod Disruption Budget
  ##
  pdb:
    enabled: false
    minAvailable: ""
    maxUnavailable: ""


## @section Dependencies
# ##################################
# #          Dependencies          #
##################################

## PostgreSQL chart configuration
## ref: https://github.com/bitnami/charts/blob/main/bitnami/postgresql/values.yaml
## @param postgresql.enabled Switch to enable or disable the PostgreSQL helm chart
## @param postgresql.auth.enablePostgresUser Assign a password to the "postgres" admin user. Otherwise, remote access will be blocked for this user
## @param postgresql.auth.username Name for a custom user to create
## @param postgresql.auth.password Password for the custom user to create
## @param postgresql.auth.database Name for a custom database to create
## @param postgresql.auth.existingSecret Name of existing secret to use for PostgreSQL credentials
postgresql:
  enabled: true
  auth:
    enablePostgresUser: false
    username: "chainloop"
    password: "chainlooppwd"
    database: "chainloop-cp"
    existingSecret: ""

# Vault server running in development mode --set development=true
# IMPORTANT: This is not meant to run in production

## Bitnami Hashicorp Vault chart configuration
## ref: https://github.com/bitnami/charts/blob/main/bitnami/vault/values.yaml
## @param vault.server.args Arguments to pass to the vault server. This is useful for setting the server in development mode
## @param vault.server.config Configuration for the vault server. Small override of default Bitnami configuration
## @param vault.server.extraEnvVars[0].name Root token for the vault server
## @param vault.server.extraEnvVars[0].value The value of the root token. Default: notasecret
## @param vault.server.extraEnvVars[1].name Address to listen on development mode
## @param vault.server.extraEnvVars[1].value The address to listen on. Default: [::]:8200
vault:
  server:
    args: [
      "server",
      "-dev"
    ]
    extraEnvVars:
      - name: VAULT_DEV_ROOT_TOKEN_ID
        value: "notasecret"
      - name: VAULT_DEV_LISTEN_ADDRESS
        value: "[::]:8200"
    config: "storage \"inmem\" {}\ndisable_mlock = true\nui = true\nservice_registration \"kubernetes\" {}"

# IMPORTANT: This is not meant to run in production
# Dex server
## Dex configuration running in development mode --set development=true
##
dex:
  ## Bitnami Dex image
  ## @skip dex.staticUsers[0].email
  ## @skip dex.staticUsers[0].hash
  ## @skip dex.staticUsers[1].email
  ## @skip dex.staticUsers[1].hash
  staticUsers:
    - email: "john@chainloop.local"
      # password: "password"
      hash: "$2a$10$2b2cU8CPhOTaGrs1HRQuAueS7JTT5ZHsHSzYiFPm1leZck7Mc8T4W"
    - email: "sarah@chainloop.local"
      # password: "password"
      hash: "$2a$10$2b2cU8CPhOTaGrs1HRQuAueS7JTT5ZHsHSzYiFPm1leZck7Mc8T4W"
  ## @param dex.image.registry [default: REGISTRY_NAME] Dex image registry
  ## @param dex.image.repository [default: REPOSITORY_NAME/dex] Dex image repository
  ## @skip dex.image.tag Dex image tag (immutable tags are recommended)
  ## @param dex.image.pullPolicy Dex image pull policy
  ## @param dex.image.pullSecrets Dex image pull secrets
  ## @param dex.image.debug Enable Dex image debug mode
  ##
  image:
    registry: docker.io
    repository: bitnami/dex
    tag: 2.43.1-debian-12-r8
    ## Specify a imagePullPolicy
    ## ref: https://kubernetes.io/docs/concepts/containers/images/#pre-pulled-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets.
    ## Secrets must be manually created in the namespace.
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## e.g:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
    ## Enable debug mode
    ##
    debug: false
  ## @param dex.replicaCount Number of Dex replicas to deploy
  ##
  replicaCount: 1
  ## Configure extra options for Dex containers' liveness and readiness probes
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-liveness-readiness-probes/#configure-probes
  ## @param dex.startupProbe.enabled Enable startupProbe on Dex nodes
  ## @param dex.startupProbe.initialDelaySeconds Initial delay seconds for startupProbe
  ## @param dex.startupProbe.periodSeconds Period seconds for startupProbe
  ## @param dex.startupProbe.timeoutSeconds Timeout seconds for startupProbe
  ## @param dex.startupProbe.failureThreshold Failure threshold for startupProbe
  ## @param dex.startupProbe.successThreshold Success threshold for startupProbe
  ##
  startupProbe:
    enabled: true
    initialDelaySeconds: 10
    periodSeconds: 10
    timeoutSeconds: 1
    failureThreshold: 3
    successThreshold: 1
  ## @param dex.livenessProbe.enabled Enable livenessProbe on Dex nodes
  ## @param dex.livenessProbe.initialDelaySeconds Initial delay seconds for livenessProbe
  ## @param dex.livenessProbe.periodSeconds Period seconds for livenessProbe
  ## @param dex.livenessProbe.timeoutSeconds Timeout seconds for livenessProbe
  ## @param dex.livenessProbe.failureThreshold Failure threshold for livenessProbe
  ## @param dex.livenessProbe.successThreshold Success threshold for livenessProbe
  ##
  livenessProbe:
    enabled: true
    initialDelaySeconds: 10
    periodSeconds: 10
    timeoutSeconds: 1
    failureThreshold: 3
    successThreshold: 1
  ## @param dex.readinessProbe.enabled Enable readinessProbe on Dex nodes
  ## @param dex.readinessProbe.initialDelaySeconds Initial delay seconds for readinessProbe
  ## @param dex.readinessProbe.periodSeconds Period seconds for readinessProbe
  ## @param dex.readinessProbe.timeoutSeconds Timeout seconds for readinessProbe
  ## @param dex.readinessProbe.failureThreshold Failure threshold for readinessProbe
  ## @param dex.readinessProbe.successThreshold Success threshold for readinessProbe
  ##
  readinessProbe:
    enabled: true
    initialDelaySeconds: 10
    periodSeconds: 10
    timeoutSeconds: 1
    failureThreshold: 3
    successThreshold: 1
  ## @param dex.customStartupProbe Custom startupProbe that overrides the default one
  ##
  customStartupProbe: {}
  ## @param dex.customLivenessProbe Custom livenessProbe that overrides the default one
  ##
  customLivenessProbe: {}
  ## @param dex.customReadinessProbe Custom readinessProbe that overrides the default one
  ##
  customReadinessProbe: {}
  ## Dex resource requests and limits
  ## ref: https://kubernetes.io/docs/concepts/configuration/manage-compute-resources-container/
  ## @param dex.resourcesPreset Set container resources according to one common preset (allowed values: none, nano, micro, small, medium, large, xlarge, 2xlarge). This is ignored if dex.resources is set (dex.resources is recommended for production).
  ## More information: https://github.com/bitnami/charts/blob/main/bitnami/common/templates/_resources.tpl#L15
  ##
  resourcesPreset: "nano"
  ## @param dex.resources Set container requests and limits for different resources like CPU or memory (essential for production workloads)
  ## Example:
  ## resources:
  ##   requests:
  ##     cpu: 2
  ##     memory: 512Mi
  ##   limits:
  ##     cpu: 3
  ##     memory: 1024Mi
  ##
  resources: {}
  ## Configure Pods Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param dex.podSecurityContext.enabled Enabled Dex pods' Security Context
  ## @param dex.podSecurityContext.fsGroupChangePolicy Set filesystem group change policy
  ## @param dex.podSecurityContext.sysctls Set kernel settings using the sysctl interface
  ## @param dex.podSecurityContext.supplementalGroups Set filesystem extra groups
  ## @param dex.podSecurityContext.fsGroup Set Dex pod's Security Context fsGroup
  ##
  podSecurityContext:
    enabled: true
    fsGroupChangePolicy: Always
    sysctls: []
    supplementalGroups: []
    fsGroup: 1001
  ## Configure Container Security Context
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
  ## @param dex.containerSecurityContext.enabled Enabled Dex containers' Security Context
  ## @param dex.containerSecurityContext.seLinuxOptions [object,nullable] Set SELinux options in container
  ## @param dex.containerSecurityContext.runAsUser Set Dex containers' Security Context runAsUser
  ## @param dex.containerSecurityContext.runAsGroup Set Dex containers' Security Context runAsGroup
  ## @param dex.containerSecurityContext.allowPrivilegeEscalation Set Dex containers' Security Context allowPrivilegeEscalation
  ## @param dex.containerSecurityContext.readOnlyRootFilesystem Set Dex containers' server Security Context readOnlyRootFilesystem
  ## @param dex.containerSecurityContext.runAsNonRoot Set Dex containers' Security Context runAsNonRoot
  ## @param dex.containerSecurityContext.capabilities.drop Set Chainloop containers' Security Context capabilities to be dropped
  ## @param dex.containerSecurityContext.privileged Set dex container's Security Context privileged
  ## @param dex.containerSecurityContext.seccompProfile.type Set container's Security Context seccomp profile
  ##
  containerSecurityContext:
    enabled: true
    seLinuxOptions: {}
    runAsUser: 1001
    runAsGroup: 1001
    runAsNonRoot: true
    readOnlyRootFilesystem: true
    allowPrivilegeEscalation: false
    privileged: false
    capabilities:
      drop: ["ALL"]
    seccompProfile:
      type: "RuntimeDefault"
  ## Dex service parameters
  ##
  service:
    ## @param dex.service.type Dex service type
    ##
    type: ClusterIP
    ## @param dex.service.ports.http Dex HTTP service port
    ## @param dex.service.ports.grpc Dex grpc service port
    ##
    ports:
      http: 5556
      grpc: 5557
    ## Node ports to expose
    ## @param dex.service.nodePorts.http HTTP node port for the Dex service
    ## @param dex.service.nodePorts.grpc gRPC node port for the Dex service
    ## NOTE: choose port between <30000-32767>
    ##
    nodePorts:
      http: ""
      grpc: ""
    ## @param dex.service.clusterIP Dex service Cluster IP
    ## e.g.:
    ## clusterIP: None
    ##
    clusterIP: ""
    ## @param dex.service.loadBalancerIP Dex service Load Balancer IP
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
    ##
    loadBalancerIP: ""
    ## @param dex.service.loadBalancerSourceRanges Dex service Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## e.g:
    ## loadBalancerSourceRanges:
    ##   - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## @param dex.service.externalTrafficPolicy Dex service external traffic policy
    ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    ##
    externalTrafficPolicy: Cluster
    ## @param dex.service.annotations Additional custom annotations for Dex service
    ##
    annotations: {}
    ## @param dex.service.extraPorts Extra ports to expose (normally used with the `sidecar` value)
    ##
    extraPorts: []
    ## @param dex.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
    ## If "ClientIP", consecutive client requests will be directed to the same Pod
    ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
    ##
    sessionAffinity: None
    ## @param dex.service.sessionAffinityConfig Additional settings for the sessionAffinity
    ## sessionAffinityConfig:
    ##   clientIP:
    ##     timeoutSeconds: 300
    sessionAffinityConfig: {}
  ## Network Policies
  ## Ref: https://kubernetes.io/docs/concepts/services-networking/network-policies/
  ##
  networkPolicy:
    ## @param dex.networkPolicy.enabled Specifies whether a NetworkPolicy should be created
    ##
    enabled: true
    ## @param dex.networkPolicy.allowExternal Don't require server label for connections
    ## The Policy model to apply. When set to false, only pods with the correct
    ## server label will have network access to the ports server is listening
    ## on. When true, server will accept connections from any source
    ## (with the correct destination port).
    ##
    allowExternal: true
    ## @param dex.networkPolicy.allowExternalEgress Allow the pod to access any range of port and all destinations.
    ##
    allowExternalEgress: true
    ## @param dex.networkPolicy.kubeAPIServerPorts [array] List of possible endpoints to kube-apiserver (limit to your cluster settings to increase security)
    ##
    kubeAPIServerPorts: [443, 6443, 8443]
    ## @param dex.networkPolicy.extraIngress [array] Add extra ingress rules to the NetworkPolicy
    ## e.g:
    ## extraIngress:
    ##   - ports:
    ##       - port: 1234
    ##     from:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    extraIngress: []
    ## @param dex.networkPolicy.extraEgress [array] Add extra ingress rules to the NetworkPolicy (ignored if allowExternalEgress=true)
    ## e.g:
    ## extraEgress:
    ##   - ports:
    ##       - port: 1234
    ##     to:
    ##       - podSelector:
    ##           - matchLabels:
    ##               - role: frontend
    ##       - podSelector:
    ##           - matchExpressions:
    ##               - key: role
    ##                 operator: In
    ##                 values:
    ##                   - frontend
    ##
    extraEgress: []
    ## @param dex.networkPolicy.ingressNSMatchLabels [object] Labels to match to allow traffic from other namespaces
    ## @param dex.networkPolicy.ingressNSPodMatchLabels [object] Pod labels to match to allow traffic from other namespaces
    ##
    ingressNSMatchLabels: {}
    ingressNSPodMatchLabels: {}
  ## Dex container ports
  ## @param dex.containerPorts.http Dex container HTTP port
  ## @param dex.containerPorts.grpc Dex gRPC port
  ## @param dex.containerPorts.metrics Dex metrics port
  ##
  containerPorts:
    http: 5556
    grpc: 5557
    metrics: 5558
  ## Metrics configuration for Dex
  ##
  metrics:
    ## Enable metrics for Chainloop Dex
    ## @param dex.metrics.enabled Enable metrics service for Dex
    ##
    enabled: false
    service:
      ## @param dex.metrics.service.type Dex service type
      ##
      type: ClusterIP
      ## @param dex.metrics.service.ports.metrics Dex metrics service port
      ##
      ports:
        metrics: 5558
      ## Node ports to expose
      ## @param dex.metrics.service.nodePorts.metrics Node port for the Dex service
      ## NOTE: choose port between <30000-32767>
      ##
      nodePorts:
        metrics: ""
      ## @param dex.metrics.service.clusterIP Dex service metrics service Cluster IP
      ## e.g.:
      ## clusterIP: None
      ##
      clusterIP: ""
      ## @param dex.metrics.service.loadBalancerIP Dex service Load Balancer IP
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-loadbalancer
      ##
      loadBalancerIP: ""
      ## @param dex.metrics.service.loadBalancerSourceRanges Dex service Load Balancer sources
      ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
      ## e.g:
      ## loadBalancerSourceRanges:
      ##   - 10.10.10.0/24
      ##
      loadBalancerSourceRanges: []
      ## @param dex.metrics.service.externalTrafficPolicy Dex service external traffic policy
      ## ref https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
      ##
      externalTrafficPolicy: Cluster
      ## @param dex.metrics.service.annotations Additional custom annotations for Dex service
      ##
      annotations: {}
      ## @param dex.metrics.service.sessionAffinity Session Affinity for Kubernetes service, can be "None" or "ClientIP"
      ## If "ClientIP", consecutive client requests will be directed to the same Pod
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#virtual-ips-and-service-proxies
      ##
      sessionAffinity: None
      ## @param dex.metrics.service.sessionAffinityConfig Additional settings for the sessionAffinity
      ## sessionAffinityConfig:
      ##   clientIP:
      ##     timeoutSeconds: 300
      sessionAffinityConfig: {}
    ## Dex metrics service monitor configuration
    ##
    serviceMonitor:
      ## @param dex.metrics.serviceMonitor.enabled Create ServiceMonitor Resource for scraping metrics using PrometheusOperator
      ##
      enabled: false
      ## @param dex.metrics.serviceMonitor.namespace Namespace which Prometheus is running in
      ## e.g:
      ## namespace: monitoring
      ##
      namespace: ""
      ## @param dex.metrics.serviceMonitor.jobLabel The name of the label on the target service to use as the job name in prometheus.
      ##
      jobLabel: ""
      ## @param dex.metrics.serviceMonitor.interval Interval at which metrics should be scraped
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ##
      interval: 30s
      ## @param dex.metrics.serviceMonitor.scrapeTimeout Timeout after which the scrape is ended
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
      ##
      scrapeTimeout: 10s
      ## @param dex.metrics.serviceMonitor.relabelings RelabelConfigs to apply to samples before scraping
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#relabelconfig
      ##
      relabelings: []
      ## @param dex.metrics.serviceMonitor.metricRelabelings MetricRelabelConfigs to apply to samples before ingestion
      ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#relabelconfig
      ##
      metricRelabelings: []
      ## @param dex.metrics.serviceMonitor.selector ServiceMonitor selector labels
      ## ref: https://github.com/bitnami/charts/tree/main/bitnami/prometheus-operator#prometheus-configuration
      ##
      ## selector:
      ##   prometheus: my-prometheus
      ##
      selector: {}
      ## @param dex.metrics.serviceMonitor.honorLabels honorLabels chooses the metric's labels on collisions with target labels
      ##
      honorLabels: false
  ## ServiceAccount configuration for the Dex
  ##
  serviceAccount:
    ## @param dex.serviceAccount.create Specifies whether a ServiceAccount should be created for Dex
    ##
    create: true
    ## @param dex.serviceAccount.name The name of the ServiceAccount to use.
    ## If not set and create is true, a name is generated using the common.names.fullname template
    ##
    name: ""
    ## @param dex.serviceAccount.automountServiceAccountToken Automount service account token for the Dex service account
    ##
    automountServiceAccountToken: false
    ## @param dex.serviceAccount.annotations Annotations for service account. Evaluated as a template. Only used if `create` is `true`.
    ##
    annotations: {}
  ## @param dex.command Override default container command (useful when using custom images)
  ##
  command: []
  ## @param dex.args Override default container args (useful when using custom images)
  ##
  args: []
  ## @param dex.extraArgs Add extra args to the default args for Dex
  ##
  extraArgs: []
  ## @param dex.automountServiceAccountToken Mount Service Account token in pod
  ##
  automountServiceAccountToken: true
  ## @param dex.hostAliases Dex pods host aliases
  ## https://kubernetes.io/docs/concepts/services-networking/add-entries-to-pod-etc-hosts-with-host-aliases/
  ##
  hostAliases: []
  ## @param dex.podLabels Extra labels for Dex pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
  ##
  podLabels: {}
  ## @param dex.podAnnotations Annotations for Dex pods
  ## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
  ##
  podAnnotations: {}
  ## @param dex.podAffinityPreset Pod affinity preset. Ignored if `dex.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAffinityPreset: ""
  ## @param dex.podAntiAffinityPreset Pod anti-affinity preset. Ignored if `dex.affinity` is set. Allowed values: `soft` or `hard`
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#inter-pod-affinity-and-anti-affinity
  ##
  podAntiAffinityPreset: soft
  ## Node dex.affinity preset
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#node-affinity
  ##
  nodeAffinityPreset:
    ## @param dex.nodeAffinityPreset.type Node affinity preset type. Ignored if `dex.affinity` is set. Allowed values: `soft` or `hard`
    ##
    type: ""
    ## @param dex.nodeAffinityPreset.key Node label key to match. Ignored if `dex.affinity` is set
    ##
    key: ""
    ## @param dex.nodeAffinityPreset.values Node label values to match. Ignored if `dex.affinity` is set
    ## E.g.
    ## values:
    ##   - e2e-az1
    ##   - e2e-az2
    ##
    values: []
  ## @param dex.affinity Affinity for Dex pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
  ## NOTE: `dex.podAffinityPreset`, `dex.podAntiAffinityPreset`, and `dex.nodeAffinityPreset` will be ignored when it's set
  ##
  affinity: {}
  ## @param dex.nodeSelector Node labels for Dex pods assignment
  ## ref: https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/
  ##
  nodeSelector: {}
  ## @param dex.tolerations Tolerations for Dex pods assignment
  ## ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
  ##
  tolerations: []
  ## @param dex.schedulerName Name of the k8s scheduler (other than default)
  ## ref: https://kubernetes.io/docs/tasks/administer-cluster/configure-multiple-schedulers/
  ##
  schedulerName: ""
  ## @param dex.shareProcessNamespace Enable shared process namespace in a pod.
  ## If set to false (default), each container will run in separate namespace, dex will have PID=1.
  ## If set to true, the /pause will run as init process and will reap any zombie PIDs,
  ## for example, generated by a custom exec probe running longer than a probe timeoutSeconds.
  ## Enable this only if customLivenessProbe or customReadinessProbe is used and zombie PIDs are accumulating.
  ## Ref: https://kubernetes.io/docs/tasks/configure-pod-container/share-process-namespace/
  ##
  shareProcessNamespace: false
  ## @param dex.topologySpreadConstraints Topology Spread Constraints for pod assignment
  ## https://kubernetes.io/docs/concepts/workloads/pods/pod-topology-spread-constraints/
  ## The value is evaluated as a template
  ##
  topologySpreadConstraints: []
  ## @param dex.updateStrategy.type Dex statefulset strategy type
  ## ref: https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#update-strategies
  ##
  updateStrategy:
    ## StrategyType
    ## Can be set to RollingUpdate or OnDelete
    ##
    type: RollingUpdate
  ## @param dex.priorityClassName Dex pods' priorityClassName
  ##
  priorityClassName: ""
  ## @param dex.runtimeClassName Name of the runtime class to be used by pod(s)
  ## ref: https://kubernetes.io/docs/concepts/containers/runtime-class/
  ##
  runtimeClassName: ""
  ## @param dex.lifecycleHooks for the Dex container(s) to automate configuration before or after startup
  ##
  lifecycleHooks: {}
  ## @param dex.extraEnvVars Array with extra environment variables to add to Dex nodes
  ## e.g:
  ## extraEnvVars:
  ##   - name: FOO
  ##     value: "bar"
  ##
  extraEnvVars: []
  ## @param dex.extraEnvVarsCM Name of existing ConfigMap containing extra env vars for Dex nodes
  ##
  extraEnvVarsCM: ""
  ## @param dex.extraEnvVarsSecret Name of existing Secret containing extra env vars for Dex nodes
  ##
  extraEnvVarsSecret: ""
  ## @param dex.extraVolumes Optionally specify extra list of additional volumes for the Dex pod(s)
  ##
  extraVolumes: []
  ## @param dex.extraVolumeMounts Optionally specify extra list of additional volumeMounts for the Dex container(s)
  ##
  extraVolumeMounts: []
  ## @param dex.sidecars Add additional sidecar containers to the Dex pod(s)
  ## e.g:
  ## sidecars:
  ##   - name: your-image-name
  ##     image: your-image
  ##     imagePullPolicy: Always
  ##     ports:
  ##       - name: portname
  ##         containerPort: 1234
  ##
  sidecars: []
  ## @param dex.initContainers Add additional init containers to the Dex pod(s)
  ## ref: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/
  ## e.g:
  ## initContainers:
  ##  - name: your-image-name
  ##    image: your-image
  ##    imagePullPolicy: Always
  ##    command: ['sh', '-c', 'echo "hello world"']
  ##
  initContainers: []
  ## Pod Disruption Budget configuration
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb
  ## @param dex.pdb.create Enable/disable a Pod Disruption Budget creation
  ## @param dex.pdb.minAvailable Minimum number/percentage of pods that should remain scheduled
  ## @param dex.pdb.maxUnavailable Maximum number/percentage of pods that may be made unavailable. Defaults to `1` if both `dex.pdb.minAvailable` and `dex.pdb.maxUnavailable` are empty.
  ##
  pdb:
    create: true
    minAvailable: ""
    maxUnavailable: ""
