## Global Docker image parameters
## Please, note that this will override the image parameters, including dependencies, configured to use the global value
## Current available global Docker image parameters: imageRegistry and imagePullSecrets
##
global:
  imageRegistry: docker-hub.gitee.work
  imagePullSecrets:
    - harbor-test-secret
#   storageClass: myStorageClass

## Bitnami Kafka image version
## ref: https://hub.docker.com/r/bitnami/kafka/tags/
##
image:
  registry: dokcer-hub.gitee.work
  repository: gitee-prod/bitnami/kafka
  tag: 2.5.0-debian-10-r54
  ## Specify a imagePullPolicy
  ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
  ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
  ##
  pullPolicy: IfNotPresent
  ## Optionally specify an array of imagePullSecrets (secrets must be manually created in the namespace)
  ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
  ## Example:
  ## pullSecrets:
  ##   - myRegistryKeySecretName
  ##
  pullSecrets: []

  ## Set to true if you would like to see extra information on logs
  ##
  debug: false

## String to partially override kafka.fullname template (will maintain the release name)
##
nameOverride:

## String to fully override kafka.fullname template
##
fullnameOverride: gitee-kafka

## Kubernetes Cluster Domain
##
clusterDomain: cluster.local

## Kafka Configuration
## Specify content for server.properties
## The server.properties is auto-generated based on other parameters when this paremeter is not specified
##
## Example:
## config: |-
##   broker.id=-1
##   listeners=PLAINTEXT://:9092
##   advertised.listeners=PLAINTEXT://KAFKA_IP:9092
##   num.network.threads=3
##   num.io.threads=8
##   socket.send.buffer.bytes=102400
##   socket.receive.buffer.bytes=102400
##   socket.request.max.bytes=104857600
##   log.dirs=/bitnami/kafka/data
##   num.partitions=1
##   num.recovery.threads.per.data.dir=1
##   offsets.topic.replication.factor=1
##   transaction.state.log.replication.factor=1
##   transaction.state.log.min.isr=1
##   log.flush.interval.messages=10000
##   log.flush.interval.ms=1000
##   log.retention.hours=168
##   log.retention.bytes=1073741824
##   log.segment.bytes=1073741824
##   log.retention.check.interval.ms=300000
##   zookeeper.connect=ZOOKEEPER_SERVICE_NAME
##   zookeeper.connection.timeout.ms=6000
##   group.initial.rebalance.delay.ms=0
##
# config:

## ConfigMap with Kafka Configuration
## NOTE: This will override config
##
# existingConfigmap:

## Kafka Log4J Configuration
## An optional log4j.properties file to overwrite the default of the Kafka brokers.
## See an example log4j.properties at:
## https://github.com/apache/kafka/blob/trunk/config/log4j.properties
##
# log4j:

## Kafka Log4j ConfigMap
## The name of an existing ConfigMap containing a log4j.properties file.
## NOTE: this will override log4j.
##
# existingLog4jConfigMap:

## Kafka broker ID.
## If unset, a unique broker id will be generated.
##
brokerId: -1

## Kafka's Java Heap size
##
heapOpts: -Xmx1024m -Xms1024m

## Switch to enable topic deletion or not.
##
deleteTopicEnable: false

## Switch to enable auto creation of topics.
## Enabling auto creation of topics not recommended for production or similar environments.
##
autoCreateTopicsEnable: true

## The number of messages to accept before forcing a flush of data to disk.
##
logFlushIntervalMessages: 10000

## The maximum amount of time a message can sit in a log before we force a flush.
##
logFlushIntervalMs: 1000

## A size-based retention policy for logs.
##
logRetentionBytes: _1073741824

## The interval at which log segments are checked to see if they can be deleted.
##
logRetentionCheckIntervalMs: 300000

## The minimum age of a log file to be eligible for deletion due to age.
##
logRetentionHours: 168

## The maximum size of a log segment file. When this size is reached a new log segment will be created.
##
logSegmentBytes: _1073741824

## A comma separated list of directories under which to store log files.
##
logsDirs: /bitnami/kafka/data

## The largest record batch size allowed by Kafka
##
maxMessageBytes: _1000012

## Default replication factors for automatically created topics
##
defaultReplicationFactor: 1

## The replication factor for the offsets topic
##
offsetsTopicReplicationFactor: 1

## The replication factor for the transaction topic
##
transactionStateLogReplicationFactor: 1

## Overridden min.insync.replicas config for the transaction topic
##
transactionStateLogMinIsr: 1

## The number of threads doing disk I/O.
##
numIoThreads: 8

## The number of threads handling network requests.
##
numNetworkThreads: 3

## The default number of log partitions per topic.
##
numPartitions: 1

## The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
##
numRecoveryThreadsPerDataDir: 1

## The receive buffer (SO_RCVBUF) used by the socket server.
##
socketReceiveBufferBytes: 102400

## The maximum size of a request that the socket server will accept (protection against OOM).
##
socketRequestMaxBytes: _104857600

## The send buffer (SO_SNDBUF) used by the socket server.
##
socketSendBufferBytes: 102400

## Timeout in ms for connecting to zookeeper.
##
zookeeperConnectionTimeoutMs: 6000

## All the parameters from the configuration file can be overwritten by using environment variables with this format: KAFKA_CFG_{KEY}
## ref: https://github.com/bitnami/bitnami-docker-kafka#configuration
## Example:
## extraEnvVars:
##   - name: KAFKA_CFG_BACKGROUND_THREADS
##     value: "10"
##
extraEnvVars: []

## extraVolumes and extraVolumeMounts allows you to mount other volumes
## Examples:
# extraVolumes:
#   - name: kafka-jaas
#     secret:
#       secretName: kafka-jaas
# extraVolumeMounts:
#   - name: kafka-jaas
#     mountPath: /bitnami/kafka/config/kafka_jaas.conf
#     subPath: kafka_jaas.conf
extraVolumes: []
extraVolumeMounts: []

## Authentication parameteres
## https://github.com/bitnami/bitnami-docker-kafka#security
##
auth:
  ## Authentication protocol for client and inter-broker communications
  ## Supported values: 'plaintext', 'tls', 'mtls', 'sasl' and 'sasl_tls'
  ## This table shows the security provided on each protocol:
  ## | Method    | Authentication                | Encryption via TLS |
  ## | plaintext | None                          | No                 |
  ## | tls       | None                          | Yes                |
  ## | mtls      | Yes (two-way authentication)  | Yes                |
  ## | sasl      | Yes (via SASL)                | No                 |
  ## | sasl_tls  | Yes (via SASL)                | Yes                |
  ##
  clientProtocol: plaintext
  interBrokerProtocol: plaintext

  ## Name of the existing secret containing the truststore and
  ## one keystore per Kafka broker you have in the Kafka cluster.
  ## MANDATORY when 'tls', 'mtls', or 'sasl_tls' authentication protocols are used.
  ## Create this secret following the steps below:
  ## 1) Generate your trustore and keystore files. Helpful script: https://raw.githubusercontent.com/confluentinc/confluent-platform-security-tools/master/kafka-generate-ssl.sh
  ## 2) Rename your truststore to `kafka.truststore.jks`.
  ## 3) Rename your keystores to `kafka-X.keystore.jks` where X is the ID of each Kafka broker.
  ## 4) Run the command below where SECRET_NAME is the name of the secret you want to create:
  ##       kubectl create secret generic SECRET_NAME --from-file=./kafka.truststore.jks --from-file=./kafka-0.keystore.jks --from-file=./kafka-1.keystore.jks ...
  ##
  # jksSecret:

  ## Password to access the JKS files when they are password-protected.
  ##
  # jksPassword:

  ## The endpoint identification algorithm used by clients to validate server host name.
  ## Disable server host name verification by setting it to an empty string
  ## See: https://docs.confluent.io/current/kafka/authentication_ssl.html#optional-settings
  ##
  tlsEndpointIdentificationAlgorithm: https

  ## JAAS configuration for SASL authentication
  ## MANDATORY when method is 'sasl', or 'sasl_tls'
  ##
  jaas:
    ## Kafka client user
    ##
    clientUser: user

    ## Kafka client password
    ##
    clientPassword: ""

    ## Kafka inter broker communication user
    ##
    interBrokerUser: admin

    ## Kafka inter broker communication password
    ##
    interBrokerPassword: ""

    ## Kafka Zookeeper user
    ##
    # zookeeperUser:

    ## Kafka Zookeeper password
    ##
    # zookeeperPassword:

    ## Name of the existing secret containing credentials for clientUser, interBrokerUser and zookeeperUser.
    ## Create this secret running the command below where SECRET_NAME is the name of the secret you want to create:
    ##       kubectl create secret generic SECRET_NAME --from-literal=client-password=CLIENT_PASSWORD --from-literal=inter-broker-password=INTER_BROKER_PASSWORD --from-literal=zookeeper-password=ZOOKEEPER_PASSWORD
    ##
    # existingSecret:

## The address(es) the socket server listens on.
## When it's set to an empty array, the listeners will be configured
## based on the authentication protocols (auth.clientProtocol and auth.interBrokerProtocol parameters)
##
listeners: []

## The address(es) (hostname:port) the brokers will advertise to producers and consumers.
## When it's set to an empty array, the advertised listeners will be configured
## based on the authentication protocols (auth.clientProtocol and auth.interBrokerProtocol parameters)
##
advertisedListeners: []

## The listener->protocol mapping
## When it's nil, the listeners will be configured
## based on the authentication protocols (auth.clientProtocol and auth.interBrokerProtocol parameters)
##
# listenerSecurityProtocolMap:

## Allow to use the PLAINTEXT listener.
##
allowPlaintextListener: true

## Name of listener used for communication between brokers.
##
interBrokerListenerName: INTERNAL

## Number of Kafka brokers to deploy
##
replicaCountreplicaCount: 1
backupStorageReplicaCount: 0

## StrategyType, can be set to RollingUpdate or OnDelete by default.
## ref: https://kubernetes.io/docs/tutorials/stateful-application/basic-stateful-set/#updating-statefulsets
##
updateStrategy: RollingUpdate

## Partition update strategy
## https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#partitions
##
# rollingUpdatePartition:

## Pod labels. Evaluated as a template
## Ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/
podLabels: {}

## Pod annotations. Evaluated as a template
## ref: https://kubernetes.io/docs/concepts/overview/working-with-objects/annotations/
##
podAnnotations: {}

## Affinity for pod assignment. Evaluated as a template
## Ref: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/#affinity-and-anti-affinity
##
affinity:
  podAntiAffinity:
    preferredDuringSchedulingIgnoredDuringExecution:
    - podAffinityTerm:
        labelSelector:
          matchLabels:
            app.kubernetes.io/component: kafka
            app.kubernetes.io/instance: "{{ .Release.Name }}"
            app.kubernetes.io/name: kafka
        topologyKey: kubernetes.io/hostname
      weight: 100

## Node labels for pod assignment. Evaluated as a template
## ref: https://kubernetes.io/docs/user-guide/node-selection/
##
nodeSelector: {}

## Tolerations for pod assignment. Evaluated as a template
## Ref: https://kubernetes.io/docs/concepts/configuration/taint-and-toleration/
##
tolerations: []

## Kafka pods' Security Context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-pod
##
podSecurityContext:
  fsGroup: 1001
  runAsUser: 1001

## Kafka containers' Security Context
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/#set-the-security-context-for-a-container
## Example:
##   containerSecurityContext:
##     capabilities:
##       drop: ["NET_RAW"]
##     readOnlyRootFilesystem: true
##
containerSecurityContext: {}

## Kafka containers' resource requests and limits
## ref: http://kubernetes.io/docs/user-guide/compute-resources/
##
resources:
  # We usually recommend not to specify default resources and to leave this as a conscious
  # choice for the user. This also increases chances charts run on environments with little
  # resources, such as Minikube. If you do want to specify resources, uncomment the following
  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
  limits: 
    cpu: 2
    memory: 4Gi
  requests: 
    cpu: 250m
    memory: 1Gi

## Kafka containers' liveness and readiness probes. Evaluated as a template.
## ref: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#container-probes
##
livenessProbe:
  tcpSocket:
    port: kafka-client
  initialDelaySeconds: 10
  timeoutSeconds: 5
  # failureThreshold: 3
  # periodSeconds: 10
  # successThreshold: 1
readinessProbe:
  tcpSocket:
    port: kafka-client
  initialDelaySeconds: 5
  failureThreshold: 6
  timeoutSeconds: 5
  # periodSeconds: 10
  # successThreshold: 1

## Pod Disruption Budget configuration
## The PDB will only be created if replicaCount is greater than 1
## ref: https://kubernetes.io/docs/concepts/workloads/pods/disruptions
##
pdb:
  create: true
  ## Min number of pods that must still be available after the eviction
  ##
  # minAvailable: 1
  ## Max number of pods that can be unavailable after the eviction
  ##
  maxUnavailable: 1

## Add sidecars to the pod.
## Example:
## sidecars:
##   - name: your-image-name
##     image: your-image
##     imagePullPolicy: Always
##     ports:
##       - name: portname
##         containerPort: 1234
##
sidecars: {}

## Service parameters
##
service:
  ## Service type
  ##
  type: ClusterIP
  ## Kafka port for client connections
  ##
  port: 9092
  ## Kafka port for inter-broker connections
  ##
  internalPort: 9093
  ## Specify the nodePort value for the LoadBalancer and NodePort service types.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
  ##
  nodePort: ""
  ## Set the LoadBalancer service type to internal only.
  ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
  ##
  # loadBalancerIP:
  ## Load Balancer sources
  ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
  ## Example:
  ## loadBalancerSourceRanges:
  ## - 10.10.10.0/24
  ##
  loadBalancerSourceRanges: []
  ## Provide any additional annotations which may be required. Evaluated as a template
  ##
  annotations: {}

## External Access to Kafka brokers configuration
##
externalAccess:
  ## Enable Kubernetes external cluster access to Kafka brokers
  ##
  enabled: false

  ## External IPs auto-discovery configuration
  ## An init container is used to auto-detect LB IPs or node ports by querying the K8s API
  ## Note: RBAC might be required
  ##
  autoDiscovery:
    ## Enable external IP/ports auto-discovery
    ##
    enabled: false
    ## Bitnami Kubectl image
    ## ref: https://hub.docker.com/r/bitnami/kubectl/tags/
    ##
    image:
      registry: docker.io
      repository: bitnami/kubectl
      tag: 1.17.4-debian-10-r82
      ## Specify a imagePullPolicy
      ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
      ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
      ##
      pullPolicy: IfNotPresent
      ## Optionally specify an array of imagePullSecrets (secrets must be manually created in the namespace)
      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
      ## Example:
      ## pullSecrets:
      ##   - myRegistryKeySecretName
      ##
      pullSecrets: []
    ## Init Container resource requests and limits
    ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
    ##
    resources:
      # We usually recommend not to specify default resources and to leave this as a conscious
      # choice for the user. This also increases chances charts run on environments with little
      # resources, such as Minikube. If you do want to specify resources, uncomment the following
      # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
      limits: {}
      #   cpu: 100m
      #   memory: 128Mi
      requests: {}
      #   cpu: 100m
      #   memory: 128Mi

  ## Parameters to configure K8s service(s) used to externally access Kafka brokers
  ## A new service per broker will be created
  ##
  service:
    ## Service type. Allowed values: LoadBalancer or NodePort
    ##
    type: LoadBalancer
    ## Port used when service type is LoadBalancer
    ##
    port: 9094
    ## Array of load balancer IPs for each Kafka broker. Length must be the same as replicaCount
    ## Example:
    ## loadBalancerIPs:
    ##   - X.X.X.X
    ##   - Y.Y.Y.Y
    ##
    loadBalancerIPs: []
    ## Load Balancer sources
    ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
    ## Example:
    ## loadBalancerSourceRanges:
    ## - 10.10.10.0/24
    ##
    loadBalancerSourceRanges: []
    ## Array of node ports used for each Kafka broker. Length must be the same as replicaCount
    ## Example:
    ## nodePorts:
    ##   - 30001
    ##   - 30002
    ##
    nodePorts: []
    ## When service type is NodePort, you can specify the domain used for Kafka advertised listeners.
    ## If not specified, the container will try to get the kubernetes node external IP
    ##
    # domain: mydomain.com
    ## Provide any additional annotations which may be required. Evaluated as a template
    ##
    annotations: {}
## Persistence paramaters
##
backupStoragePersistence:
  enabled: true
  ## A manually managed Persistent Volume and Claim
  ## If defined, PVC must be created manually before volume will be bound
  ## The value is evaluated as a template
  ##
  # existingClaim:
  ## PV Storage Class
  ## If defined, storageClassName: <storageClass>
  ## If set to "-", storageClassName: "", which disables dynamic provisioning
  ## If undefined (the default) or set to null, no storageClassName spec is
  ## set, choosing the default provisioner.
  ##
  storageClass: "managed-nfs-storage-ssd"
  ## PV Access Mode
  ##
  accessModes:
    - ReadWriteOnce
  ## PVC size
  ##
  size: 8Gi
  ## PVC annotations
  ##
  annotations: {}


## Persistence paramaters
##
persistence:
  enabled: true
  ## A manually managed Persistent Volume and Claim
  ## If defined, PVC must be created manually before volume will be bound
  ## The value is evaluated as a template
  ##
  # existingClaim:
  ## PV Storage Class
  ## If defined, storageClassName: <storageClass>
  ## If set to "-", storageClassName: "", which disables dynamic provisioning
  ## If undefined (the default) or set to null, no storageClassName spec is
  ## set, choosing the default provisioner.
  ##
  storageClass: "managed-nfs-storage"
  ## PV Access Mode
  ##
  accessModes:
    - ReadWriteOnce
  ## PVC size
  ##
  size: 8Gi
  ## PVC annotations
  ##
  annotations: {}

## Init Container paramaters
## Change the owner and group of the persistent volume(s) mountpoint(s) to 'runAsUser:fsGroup' on each component
## values from the securityContext section of the component
##
volumePermissions:
  enabled: false
  ## Bitnami Minideb image
  ## ref: https://hub.docker.com/r/bitnami/minideb/tags/
  ##
  image:
    registry: docker.io
    repository: bitnami/minideb
    tag: buster
    ## Specify a imagePullPolicy
    ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
    ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
    ##
    pullPolicy: IfNotPresent
    ## Optionally specify an array of imagePullSecrets (secrets must be manually created in the namespace)
    ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
    ## Example:
    ## pullSecrets:
    ##   - myRegistryKeySecretName
    ##
    pullSecrets: []
  ## Init Container resource requests and limits
  ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
  ##
  resources:
    # We usually recommend not to specify default resources and to leave this as a conscious
    # choice for the user. This also increases chances charts run on environments with little
    # resources, such as Minikube. If you do want to specify resources, uncomment the following
    # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    limits: {}
    #   cpu: 100m
    #   memory: 128Mi
    requests: {}
    #   cpu: 100m
    #   memory: 128Mi

## Kafka pods ServiceAccount
## ref: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/
##
serviceAccount:
  ## Specifies whether a ServiceAccount should be created
  ##
  create: true
  ## The name of the ServiceAccount to use.
  ## If not set and create is true, a name is generated using the fluentd.fullname template
  ##
  # name:

## Role Based Access
## ref: https://kubernetes.io/docs/admin/authorization/rbac/
##
rbac:
  ## Specifies whether RBAC rules should be created
  ## binding Kafka ServiceAccount to a role
  ## that allows Kafka pods querying the K8s API
  ##
  create: false

## Prometheus Exporters / Metrics
##
metrics:
  ## Prometheus Kafka Exporter: exposes complimentary metrics to JMX Exporter
  ##
  kafka:
    enabled: false

    ## Bitnami Kafka exporter image
    ## ref: https://hub.docker.com/r/bitnami/kafka-exporter/tags/
    ##
    image:
      registry: registry.baidubce.com
      repository: gitee-poc/bitnami/kafka-exporter
      tag: 1.2.0-debian-10-r131
      ## Specify a imagePullPolicy
      ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
      ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
      ##
      pullPolicy: IfNotPresent
      ## Optionally specify an array of imagePullSecrets (secrets must be manually created in the namespace)
      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
      ## Example:
      ## pullSecrets:
      ##   - myRegistryKeySecretName
      ##
      pullSecrets: []

    ## Extra flags to be passed to Kafka exporter
    ## Example:
    ## extraFlags:
    ##   tls.insecure-skip-tls-verify: ""
    ##   web.telemetry-path: "/metrics"
    ##
    extraFlags: {}

    ## Name of the existing secret containing the optional certificate and key files
    ## for Kafka Exporter client authentication
    ##
    # certificatesSecret:

    ## Prometheus Kafka Exporter' resource requests and limits
    ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
    ##
    resources:
      # We usually recommend not to specify default resources and to leave this as a conscious
      # choice for the user. This also increases chances charts run on environments with little
      # resources, such as Minikube. If you do want to specify resources, uncomment the following
      # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
      limits: 
        cpu: 100m
        memory: 128Mi
      requests: 
        cpu: 100m
        memory: 128Mi

    ## Service configuration
    ##
    service:
      ## Kafka Exporter Service type
      ##
      type: ClusterIP
      ## Kafka Exporter Prometheus port
      ##
      port: 9308
      ## Specify the nodePort value for the LoadBalancer and NodePort service types.
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
      ##
      nodePort: ""
      ## Set the LoadBalancer service type to internal only.
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
      ##
      # loadBalancerIP:
      ## Load Balancer sources
      ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
      ## Example:
      ## loadBalancerSourceRanges:
      ## - 10.10.10.0/24
      ##
      loadBalancerSourceRanges: []
      ## Set the Cluster IP to use
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#choosing-your-own-ip-address
      ##
      # clusterIP: None
      ## Annotations for the Kafka Exporter Prometheus metrics service
      ##
      annotations:
        prometheus.io/scrape: "true"
        prometheus.io/port: "{{ .Values.metrics.kafka.port }}"
        prometheus.io/path: "/metrics"

  ## Prometheus JMX Exporter: exposes the majority of Kafkas metrics
  ##
  jmx:
    enabled: false

    ## Bitnami JMX exporter image
    ## ref: https://hub.docker.com/r/bitnami/jmx-exporter/tags/
    ##
    image:
      registry: registry.baidubce.com
      repository: gitee-poc/bitnami/jmx-exporter
      tag: 0.13.0-debian-10-r20
      ## Specify a imagePullPolicy
      ## Defaults to 'Always' if image tag is 'latest', else set to 'IfNotPresent'
      ## ref: http://kubernetes.io/docs/user-guide/images/#pre-pulling-images
      ##
      pullPolicy: IfNotPresent
      ## Optionally specify an array of imagePullSecrets (secrets must be manually created in the namespace)
      ## ref: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/
      ## Example:
      ## pullSecrets:
      ##   - myRegistryKeySecretName
      ##
      pullSecrets: []

    ## Prometheus JMX Exporter' resource requests and limits
    ## ref: http://kubernetes.io/docs/user-guide/compute-resources/
    ##
    resources:
      # We usually recommend not to specify default resources and to leave this as a conscious
      # choice for the user. This also increases chances charts run on environments with little
      # resources, such as Minikube. If you do want to specify resources, uncomment the following
      # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
      limits: {}
      #   cpu: 100m
      #   memory: 128Mi
      requests: {}
      #   cpu: 100m
      #   memory: 128Mi

    ## Service configuration
    ##
    service:
      ## JMX Exporter Service type
      ##
      type: ClusterIP
      ## JMX Exporter Prometheus port
      ##
      port: 5556
      ## Specify the nodePort value for the LoadBalancer and NodePort service types.
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeport
      ##
      nodePort: ""
      ## Set the LoadBalancer service type to internal only.
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#internal-load-balancer
      ##
      # loadBalancerIP:
      ## Load Balancer sources
      ## ref: https://kubernetes.io/docs/tasks/access-application-cluster/configure-cloud-provider-firewall/#restrict-access-for-loadbalancer-service
      ## Example:
      ## loadBalancerSourceRanges:
      ## - 10.10.10.0/24
      ##
      loadBalancerSourceRanges: []
      ## Set the Cluster IP to use
      ## ref: https://kubernetes.io/docs/concepts/services-networking/service/#choosing-your-own-ip-address
      ##
      # clusterIP: None
      ## Annotations for the JMX Exporter Prometheus metrics service
      ##
      annotations:
        prometheus.io/scrape: "true"
        prometheus.io/port: "{{ .Values.metrics.jmx.exporterPort }}"
        prometheus.io/path: "/"

    ## JMX Whitelist Objects, can be set to control which JMX metrics are exposed. Only whitelisted
    ## values will be exposed via JMX Exporter. They must also be exposed via Rules. To expose all metrics
    ## (warning its crazy excessive and they aren't formatted in a prometheus style) (1) `whitelistObjectNames: []`
    ## (2) commented out above `overrideConfig`.
    ##
    whitelistObjectNames:
      - kafka.controller:*
      - kafka.server:*
      - java.lang:*
      - kafka.network:*
      - kafka.log:*

    ## Prometheus JMX exporter configuration
    ## Specify content for jmx-kafka-prometheus.yml. Evaluated as a template
    ##
    ## Credits to the incubator/kafka chart for the JMX configuration.
    ## https://github.com/helm/charts/tree/master/incubator/kafka
    ##
    config: |-
      jmxUrl: service:jmx:rmi:///jndi/rmi://127.0.0.1:5555/jmxrmi
      lowercaseOutputName: true
      lowercaseOutputLabelNames: true
      ssl: false
      {{- if .Values.metrics.jmx.whitelistObjectNames }}
      whitelistObjectNames: ["{{ join "\",\"" .Values.metrics.jmx.whitelistObjectNames }}"]
      {{- end }}

    ## ConfigMap with Prometheus JMX exporter configuration
    ## NOTE: This will override metrics.jmx.config
    ##
    # existingConfigmap:

  ## Prometheus Operator ServiceMonitor configuration
  ##
  serviceMonitor:
    enabled: true
    ## Namespace in which Prometheus is running
    ##
    # namespace: monitoring

    ## Interval at which metrics should be scraped.
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ##
    # interval: 10s

    ## Timeout after which the scrape is ended
    ## ref: https://github.com/coreos/prometheus-operator/blob/master/Documentation/api.md#endpoint
    ##
    # scrapeTimeout: 10s

    ## ServiceMonitor selector labels
    ## ref: https://github.com/bitnami/charts/tree/master/bitnami/prometheus-operator#prometheus-configuration
    ##
    # selector:
    #   prometheus: my-prometheus
  prometheusRule:
    enabled: false
    additionalLabels: {}
    namespace: ""
    rules: []
##
## Zookeeper chart configuration
##
## https://github.com/bitnami/charts/blob/master/bitnami/zookeeper/values.yaml
##
zookeeper:
  enabled: true
  auth:
    ## Enable Zookeeper auth
    ##
    enabled: false
    ## User that will use Zookeeper clients to auth
    ##
    # clientUser:
    ## Password that will use Zookeeper clients to auth
    ##
    # clientPassword:
    ## Comma, semicolon or whitespace separated list of user to be created. Specify them as a string, for example: "user1,user2,admin"
    ##
    # serverUsers:
    ## Comma, semicolon or whitespace separated list of passwords to assign to users when created. Specify them as a string, for example: "pass4user1, pass4user2, pass4admin"
    ##
    # serverPasswords:

## This value is only used when zookeeper.enabled is set to false
##
externalZookeeper:
  ## Server or list of external zookeeper servers to use.
  ##
  servers: []
